KING KUTTER'S HEAVY DUTY REAR BLADE is in addition to our very popular rear blade. The heavy-duty mold board heavy-duty top hitch design make it a leader in quality and performance. Its features include 5 forward and 5 reverse adjustments and 3 tilt angle adjustments. Each blade has a high carbon steel reversible cutting edge.
- Width: 7'
- Hitch Category: CAT 1
- Adjustments: 5 Front and 5 Rear / Right or Left Tilt
- Corrosion resistant tank
- 3 - Point carrier frame fits category I and II hitches
- Plumbing for roller pump includes strainer, pressure relief valve and pressure gauge
- 8 - Way "on - off" selector valve for 3 selection boom control
- Pump not included
- 8 Row, 28' folding boom assembly
- Rubber hoses supplied for longer life
This 24", 10 HP, aeration fan with starter from Spread-All will get the job done every time. It is galvanized to prevent rust, and with a Baldor motor, you will experience years of worry free air movement.
Either the intake or the discharge ends may be mounted to an air duct metal transition or a flat wall bin
Reversible application to pull air down through the grain, or to direct the air flow up through the grain by turning the fan around and reversing the guard
Completely factory assembled and test run before shipment
Standard legs, stands, & carrying handles
Zinc Guard & Metal Fan Blade
KING KUTTER'S ROTARY HARROWS are easy to use. No PTO required, just drop it into position and go. You set the angle of attack and let the rotary harrow do the rest. It is designed to aerate soil and pull weeds. The unique turning action allows the harrow to level soil by redistributing it inward. This is an excellent tool for high spots away from fences and walls. It levels, floats and breaks up clods. King Kutters Rotary Harrows are ideal for use in arenas, pastures, orchards, vineyards, and landscaping.
- Width: 6'
- Hitch Category: Cat 1
KING KUTTER'S ROTARY KUTTER is a quality constructed, durable Kutter that's built to last. Constructed with rugged I-beam side rails, and a single sheet top deck that is fully reinforced with cross and spider bracing. Standard features include cast iron gearbox, stump jumper, adjustable laminated tail wheel and shielded PTO with a shear pin (slip clutch optional on most models).
- Cutting Width: 72"
- Cutting Height: 4.0 - 8.0"
- Gearbox Rating: 40HP
- Deck Thickness: 10 GA
- Blade Size: 1/2 x 3 x 30"
Picture shows optional chain guards, that may be purchased separately.Learn More
- Angle/Tube Frame
- Adjustable Disc Harrows
- Cast Bearings
- 1" Axles
- 7 1/2" Disc Spacing
- 2" X 3" Arms
KING KUTTER'S BOX FRAME DISC HARROWS are constructed of heavy steel square tubing. It connects easily to any three-point hitch with category one specifications. The disc gang axles are made of 1" square high carbon steel rods mounted on double thrust sealed steel bearings. These disc harrows have four angle adjustments of 16 degrees, 30 degrees, 44 degrees, and 57 degrees with an easy single bolt adjustment.
- Width: 6 1/2'
- Number of blades: 20
- Blade Diameter: 18"
- Blade Thickness: 3.0 MM
KING KUTTERS PROFESSIONAL HINGED BACK BOX BLADES have the same features as the standard box blades. In addition, the rear cutting edge is hinged to allow deeper penetration and to eliminate the buildup of soil between the cutting edges. It also features 3/8" end plates and 1/2" front to back bracing.
- Width: 72"
- Hitch Category: Cat 1
- Number of Shanks: 6
- Adjustments: 4
Crop Care Tanks are designed for OEM sprayer applications that contain chemicals rated for contact with polyethylene. Hoop recesses are provided around the tank to facilitate installation and anchoring. Wide bottom tanks are available with either a box-style or sloped-style sump on the bottom for withdrawal. Narrow bottom tanks are cut out on each side to facilitate narrow track widths and are only available with a sloped-style sump. Larger tanks are furnished with polyethylene baffles for fluid control and a five-gallon rinse tank. The tanks are manufactured from high-density polyethylene with U.V. stabilizers and are designed for liquids of up to 1.9 specific gravity. Tanks are shipped on returnable pallets. Fittings are shipped loose.
- Capacity - 1,000 Gallons
- Weight - 345 Pounds
- Dimensions - 58 x 115 x 47
- Lid - 16"
- Fitting - 2"
Skid steer loader bucket with teeth. Heavy duty low profile design. Built tough. Great for use on a construction, farm, ranch, or landscaping job site.Product Specifications
- Overall depth: 39.5” less teeth
- Overall height: 22”
- Inside width: 64”
- Inside depth: 36” less teeth
- Wrapper: A36 steel
- 3/8 " steel skid plates