Pramitol is a bare-ground, non-selective herbicide for total vegetation control in non-crop areas.
Widely used by commercial and industrial applicators to control of vegetation in the following areas:
- Around buildings, storage areas, fuel tanks, recreational areas, lumberyards, pipelines, etc.
- Paved areas such as airports, highway medians, railroads, right of ways, etc.
In optimum conditions, Pramitol 25E will inhibit growth of vegetation for up to a year or more.
Effective on hard to control weeds such as Johnson grass and bindweed.
- Follow all label guidelines, instructions, and warnings.
- 1 Gallon treats up to 10,000 sq. ft.
- Use protective clothing and gear when handling.
- Apply before weed emergence, or up to 3 months after.
- Application rates vary from 4 to 10 gallons per acre depending on soil type, the weeds present and stage of growth, and climatic conditions. Higher application rates are intended for use on heavier soils, where weed growth is heavy, or areas with high rainfall.
- Higher rates are also applicable when longer residual control is desired, such as regions with a long growing season.
- Pramitol 25E is most effective when moved to root system. Effectiveness is dependent on rainfall to move it to the roots. Arid soil conditions and lack of sufficient rainfall can result in reduced effectiveness.
- Toxic to fish and terrestrial invertebrates.
- Do not apply directly to water, areas where surface water is present, or intertidal areas lower than the high water mark.
- Do not contaminate irrigation water or water used for domestic purposes.
- Do not contaminate water when disposing of equipment rinsate and wash waters.
- Do not pour, spill, use or store near heat or open flame.
- Apply only as specified on this label.
- Prometon: 2,4-bis(isopropylamino)-methoxy-s-triazine (25.0%)
- Inert ingredients (75%)
This product is restricted from being used in the CA,HI, and AK
This product must ship UPS Ground or Freight and cannot be expedited.
Adding colorant to your pond or water feature will not only enhance the aesthetic, but it can reduce undergrowth as well!
Aquashade is EPA registered to control the growth of algae and aquatic plants. By filtering out the spectrum of light rays that allow for photosynthesis (red-orange and blue-violet), this colorant inhibits bottom growth. Floating plants are not affected by this product if the plant has already reached the surface of the water.
After application, the water retains a beautiful aqua-blue tint for a professional appearance.
For use in contained lakes and ponds (ornamental, recreational, fish bearing/farming), both natural and manmade, with little or no outflow of water. Acceptable for use in swimming, animal and livestock drinking, irrigation, and fish consumption when used according to label.
- Apply early (before plant germination) to suppress the growth of algae and aquatic plants throughout the season.
- Most effective in water deeper than 2 feet.
- Not for use in drinking water or water intended for human consumption.
- Use with herbicide or algaecide to control shallow-water plants and surface algae mats.
- Dosage application is 0.25 gallons per acre-ft for 0.8ppm. 1 gallon treats 4 acre-ft (1.3 million gallons).
- Adhere to all label guidelines and warnings.
Active ingredients are 23.63% Acid Blue 9, & 2.39% Acid Yellow 23.
Cannot be sold in the following states: California, Connecticut, Maine, New Jersey, New York, Oregon and WashingtonLearn More
- Suitable for garden applications and small animal containment
- Heavy-Duty studded steel posts stand up to the demands of cattle, large animals and areas receiving strong use
- Both Standard and Heavy-Duty tee posts are available in 5’ to 8’ lengths in 6” increments
- Exclusive Red and Gray Color
- Durable Paint Coating
- Resistant to Rust
- Strong Blades
When inspecting your fields are you noticing annual and perennial grasses in the soybeans? There is no time or manpower to hoe those rows. This is one more aggravation that you just do not need!! Don’t blow your top. There is a solution. This is a job for Tide Clethodim 1 Gallon Selective Post-emergent Herbicide. More specifically, it is a 26.4% solution that contains 2 pounds active ingredient Clethodim per US gallon.
This is a dedicated herbicide that does not control sedges or broadleaf weeds. Seedling and rhizome Johnsongrass and Shattercane will fall with this product, not to mention the volunteer corn that tends to pervade the bean field from last year’s crop.
As we mentioned above this product is for soybeans but also labeled for cotton, alfalfa, leafy, tuberous and fruiting vegetables, sugar beets, peanuts, sunflowers, potatoes, ornamentals, non-bearing fruit and nut trees, and other crops and non-crop areas.
Additional concerns for using this herbicide? Dig in and check the product label by clicking here.Learn More
4 gallon backpack sprayer with standard features for General Applications
- 3 Stage Filtration system
- 4" Wide Opening with Strainer/Filter Basket
- Padded Shoulder Straps
- 3 pc nozzle pack (fan, cone and adjustable brass
* This unit may be substituted with a Chapin, Harvest King or Spetracide brand. They are the same sprayer.
*This unit may be subsituted between Deluxe or Professional. They are the same sprayer.Learn More
Retrieve moisture readings on the go with the Dickey John M3G Portable Moisture Tester. All you need to obtain an accurate moisture reading a simple scoop from the hoppers or bins. No cups or screw on caps. This unit comes with Corn, Soybeans and Wheat preprogrammed calibrations. This means that the M3G is ready to work for you right out of the box. Simply select your grain type with the push of a button and you are ready to test.
- Test up to three grains
- Preprogrammed calibrations for:
- Corn (9-31%)
- Soybeans (8-22%)
- Wheat (8-20%)
Featuring 0.5 repeatability with normal stored grain, this technologically advanced unit lets you easily bias to match readings to local elevator tests. Select grain types with the push of a button, and change grain calibrations with a simple download.Learn More