Our Sliding-Door Horse Stall is one of the leaders in the equestrian market. Ideal for open barn/shed applications, the 7' tall sides and fronts can be ordered separately or as a complete unit. A stall front can be installed in an existing barn or you can convert a barn by using the entire stall. Individual corner bracket allows for one or multiple side-by-side units.
- 4' wide sliding door with smooth-operating ball-bearing rollers
- Optional swing-out poly or galvanized-back hay and grain feeders and grain feeders
- 1/2 in. solid steel stall bars
- Flat doorway threshold helps prevent catching or stumbling
- Unique latches that eliminate all sharp protrusions
- Stalls easily outfitted with 2x lumber or poly panels
Convenient step unit makes it easier to get in and out of your tractor. Handrail is available for additional safety. Easy to install with no holes to drill and hardware is included. Step is 14 1/2" wide and 6" deep. It mounts at a 30 degree angle to the tractor and has 9" between each step. Matches original equipment colors. Available for the right or left side of IH 86-88 series rowcrop tractors. Protrudes 26" from the cab door. Fits IH 3088, 3288, 3488, 3688, 5088, 5288, 5488.
Please Note: This step does not fit the 6388, 6588, 6788 Series. We do not have a step application for these tractors.Learn More
Convenient adjustable step unit makes it easier to get in and out of your tractor. Handrail is available for additional safety. Easy to install with no holes to drill and hardware is included. Step is 14 1/2" wide and 6" deep. It mounts at a 30 degree angle to the tractor and has 9" between each step. Matches original equipment colors. This model fits on the left side of JD tractors with Soundguard cabs. This is the best application for tractors with Front Wheel Assist or loaders on them. Fits John Deere 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4450, 4455, 4555, 4560, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960.
Please note: his step will only fit JD tractors with Soundguard cabs It will not work for an open station tractor.Learn More
Pick Up Tanks are selected as applicator tanks or when transportable (non-D.O.T. regulated) containment is required. Tanks are designed to fit most pickup trucks. Tanks are manufactured from medium-density polyethylene with U.V. inhibitors and designed for containment of liquids of up to 1.7 specific gravity. Tank walls are translucent for level viewing and equipped with gallon indicators.
- Capacity - 450 Gallons
- Weight - 102 Pounds
- Dimensions (diameter x height) - 62" x 41"
- Lid - 8"
- Fitting - 2"
Made to the same heavy-duty specifications as the Powder River Classic Panels, and featuring the same Classic Five-Year Limited Warranty, this gate is a must for crowding situations.
Like the Classic Panels, this gate can withstand large amounts of pressure and spring back to its original shape. The hinge is another key ingredient in the formula for strength. Made of 1/4" x 3" steel, these 180° hinges can be mounted to wood or welded to steel posts. A double-piston lever latch provides opening ease while on the ground or on horse back.
- Height Overall - 52"
- Frame - 1.66" O.D. tube, 13 gauge.
- Horizontal Rails: 5 Pentagonal, 14 gauge high strength.
- Hinges - 1/4" x 3", 180° Swing.
Extend your CJJ buckets life, with a optional replaceable bolt-on cutting edge. The double bevel edge allows you to flip the blade around to reveal new edge.Product Specifications
- Double bevel edge
- Pre-drilled 6” on center holes
- Width: 6”
- Thickness: .75”
When Tarter designers set out to make the best and most versatile system on the market, they started with several clear objectives. Make it rugged, make it versatile, make it easy to assemble and use, make it affordable, and make it work every single time. The result? An alley and sweep system like no other on the market.
- Every unit is pre-assembled at the factory prior to shipping. Everything fits the way it is supposed to. Nothing is missing. Nothing is broken. That’s why we can guarantee smooth assembly and operation each and every time.
- No tools required, unless sweep gate latch is reversed. Assembly is simple. The complete unit can be set up in 6 different configurations, putting the controls where you want them, in less than an hour
- Each tub has 3 full bows to hold the sweep tub in place – this means no shifting or moving of any tub panels regardless of the load.
- A fully adjustable alleyway on all units allows working animals of any size. These are versatile systems, designed for a wide range of species, sizes, and ages. The alleyway rolls on a smooth but tough roller system. Large alley adjustment handles make adjustment easy in 3" increments from 13" to 31". Interchangeable first bow at chute connection points make for clean and easy connections to either the Cattlemaster or Cattleman Chutes.
- Value pricing offers a heavyduty system at a lightweight price. All sweep and alley systems are 14-gauge or heavier. The 7-bar design on both the open and sheeted unit is heavier and more rigid than any on the market. You simply get more cattle-handling capacity, versatility, and simplicity for a good deal less money. The durable, corrosion-resistant powder coat finish will still be bright and rust-free long after dip-painted models are covered in rust. Expect these heavy-duty, rugged units to be your working partners for a long, long time.
- Both open and sheeted units ship complete on a single pallet that includes all components and easy-touse, picture-based assembly instructions. This means easy shipping to the store and easy transport to the farm after purchase.
- Provides a versatile, low-cost material for fencing needs
- Suitable for a wide variety of animal cage applications
- Quality galvanized wire resists weathering
- Standard 100’ rolls are available in a wide variety of styles and gauges to meet the needs of the job