KING KUTTERS PROFESSIONAL DUAL EDGE LAND GRADER is the perfect tool for driveway and gravel road maintenance and construction. It fills pot holes and low spots, while removing the high spots and redistributing the material to achieve a perfectly finished roadway surface. It uses 1/4" thick side plates and 1/2" thick wear plates, along with 3" X 3" heavy tubing to make up the main frame that ensures that your new land plane will perform well on farms and ranches as well as in landscaping and contractor applications.
- Width: 84"
- Hitch Category: Cat 1 & 2
Designed for a variety of uses, the 5500 is one of the best general purpose blades on the market with features that really perform.
- 3 Working Widths
- Reversible Cutting Edge
- Reversible Curved Moldboard
- Heavy 4”x 4”x 3/8” Main Tube
- Manual Angle, Offset and Tilt Functions
- Straddle Type Combination 3-Point Hitch
- Designed to Perform with Less Power
The Stump Bucket from Blue Diamond Attachments is the most effective and versatile stump bucket you can get your hands on. WIth the long shaft and curved angle this bucket can get under stumps or rocks and quickly rip out any obstacle. If you own a skid steer, you need a stump bucket!
- Curved bottom for better leverage
- 3 replaceable cast teeth
- 1” x 8” cutting edge
- Heavily gusseted quick attach
- Reverse curled teeth up both sides
- Narrow profile digs without wedging in the ground
- Measures 56” long
KING KUTTERS PROFESSIONAL HINGED BACK BOX BLADES have the same features as the standard box blades. In addition, the rear cutting edge is hinged to allow deeper penetration and to eliminate the buildup of soil between the cutting edges. It also features 3/8" end plates and 1/2" front to back bracing.
- Width: 84"
- Hitch Category: Cat 1
- Number of Shanks: 6
- Adjustments: 4
- Heavy angle iron frame.
- Saucer shaped blade carrier w/ a 10 gauge pan and 1/2" x 4" bar.
- Cast wheel hub w/ 1 1/4" fork shaft.
- Slotted top link hole on 3 point hitch.
- 12 gauge deck w/ 7 1/2 " sides.
- Laminated rubber tire.
- 1/2" x 3" blades.
- Cutting Width: 42"
- Recommended Tractor HP: 10-20
- Blade Tip Speed: 138 mph/ 11,777 fpm
- Hitch: 3-Point
- Lift Pins: Category I
- Driveshaft: #4 metric
- Driveline Protection: 1/2" Shear Pin
- Gearbox HP: 55 hp
- Gearbox Ratio: 1:93
- Frame Composition: Heavy Angle Iron
- Blade Carrier Pan: Round, Saucer Shaped
Ace Roto-Mold cistern tanks are intended for bulk storage or collection of potable water and designed for below ground level installations. Tanks are manufactured from high-density polyethylene with U.V. inhibitors and feature a trapezoidal, deep rib design. Only Ace tanks feature a custom-molded gasket in the lid. Manufactured from extruded Nitrile rubber, the gasket snaps into the lid and ensures a watertight seal. Our exclusive lid design locks in place with nylon ties, eliminating the need for metal fasteners that can corrode and fail. Ace Roto-Mold cistern tanks are FDA-approved for potable water and are manufactured for containment of liquids up to 1.7 specific gravity.
- Capacity - 1,150 Gallon
- Weight - 414 Pounds
- Dimensions - 60 x 101 x 60
115VAC Electric Diaphragm Pump with reciprocating, spring driven configuration that maintains constant pressure regardless of load. Pump automatically goes neutral when the end of hose valve is shut off. Glass-reinforced polypropylene pump housing provides integrity and excellent material compatibility inside and out. Motor is UL listed, Explosion Proof.Large, Portable Tubular Frame with Top and Bottom Tote Adapter Kits, Santoprene Diaphragms, and EPDM Elastomers. Includes 825 Digital Meter, 1"x12' Hose, 1"x9' EPDM Hose, and Shutoff Ball Valve.
- 115Volt AC Motor
- Explosion Proof Motor
- Tubular Frame Assembly
- Top and Bottom of Tote Adapter Kits
- Santoprene Diaphragms
- EPDM Seals
- 1"x9' EPDM Hose
- 1"x12' EPDM Hose
- Shutoff Ball Valve
- Glass-filled Polypropylene Housing<
- Thermal Overload Protection
- 130 Degree F Max Temperature
- 10ft Suction Lift
- Up to 0.1" Diameter Solids
- 825 Digital Meter
CJJ, Inc. offers a practical, multi-purpose utility bucket that can help you get the job done quick. Our utility bucket can substitute for snow, dirt, or a wide range of other buckets. The utility bucket can be used for leveling, digging, loading, hauling and dumping. Use it for demolition, landscaping, silage, construction or renovation jobs.Product Specifications
- Overall height: 26"
- Inside depth: 40"
- Cutting edge: .75" X 6" C1055
- Wrapper: A36 steel
KING KUTTER'S ROTARY KUTTER is a quality constructed, durable Kutter that's built to last. Constructed with rugged I-beam side rails, and a single sheet top deck that is fully reinforced with cross and spider bracing. Standard features include cast iron gearbox, stump jumper, adjustable laminated tail wheel and shielded PTO with a shear pin (slip clutch optional on most models).
- Cutting Width: 60"
- Cutting Height: 2.0 - 8.0"
- Gearbox Rating: 40HP
- Deck Thickness: 12 GA
- Blade Size: 1/2 x 3 x 24"
Picture shows optional chain guards, that may be purchased separately.Learn More
Open Top Tanks are selected for collection systems, temporary liquid storage, or as secondary containment for vertical tanks in indoor or outdoor installations. Tanks are manufactured from medium or high-density polyethylene with U.V. inhibitors. Tank walls are translucent for level viewing and equipped with gallon indicators.
- Capacity - 1,700 Gallons
- Weight - 240 Pounds
- Dimensions - 86 x 68
- Specific Gravity - 1.7