Pramitol is a bare-ground, non-selective herbicide for total vegetation control in non-crop areas.
Widely used by commercial and industrial applicators to control of vegetation in the following areas:
- Around buildings, storage areas, fuel tanks, recreational areas, lumberyards, pipelines, etc.
- Paved areas such as airports, highway medians, railroads, right of ways, etc.
In optimum conditions, Pramitol 25E will inhibit growth of vegetation for up to a year or more.
Effective on hard to control weeds such as Johnson grass and bindweed.
- Follow all label guidelines, instructions, and warnings.
- 1 Gallon treats up to 10,000 sq. ft.
- Use protective clothing and gear when handling.
- Apply before weed emergence, or up to 3 months after.
- Application rates vary from 4 to 10 gallons per acre depending on soil type, the weeds present and stage of growth, and climatic conditions. Higher application rates are intended for use on heavier soils, where weed growth is heavy, or areas with high rainfall.
- Higher rates are also applicable when longer residual control is desired, such as regions with a long growing season.
- Pramitol 25E is most effective when moved to root system. Effectiveness is dependent on rainfall to move it to the roots. Arid soil conditions and lack of sufficient rainfall can result in reduced effectiveness.
- Toxic to fish and terrestrial invertebrates.
- Do not apply directly to water, areas where surface water is present, or intertidal areas lower than the high water mark.
- Do not contaminate irrigation water or water used for domestic purposes.
- Do not contaminate water when disposing of equipment rinsate and wash waters.
- Do not pour, spill, use or store near heat or open flame.
- Apply only as specified on this label.
- Prometon: 2,4-bis(isopropylamino)-methoxy-s-triazine (25.0%)
- Inert ingredients (75%)
This product is restricted from being used in the CA,HI, and AK
This product must ship UPS Ground or Freight and cannot be expedited.
Used with all electric pumps with 3/4 inch outlets. For dispensing diesel fuel, gasoline, grease, kerosene and petroleum oils. Nitrile inner tube, external is a blend of Nitrile and PVC materials for protection against cuts, abrasions and snags, and for puncture resistance. 8 inch internal spring guard protects the hose from exceeding its bend radius, to last longer. Braided copper static ground wire. Threaded fittings. Made in the USA
Features & Benefits
- Type: Fuel Hose Assembly
- Contents: 20 ft Hose w/ Static Wire, Spring Guard, Threaded Fittings
- Application: Dispensing gasoline, diesel, kerosene and most petroleum
- based products
- Model Compatibility: All pumps with 3/4" Outlet
- Hose Length: 20 ft
- Hose Diameter: 3/4"
- Hose Material: Reinforced Rubber
- Fitting Size: 3/4"
- Product Weight: 7.0 lbs
- Neoprene Exterior
- Designed for Use with all Electric Pump
- High Quality Nitrile Inner Tube
$36.97This valve can be used for a small system of 1 to 2 cups or a large system designed to support 1500 quail. Pre-set to provide approximately 8 lb. water pressure to drink cups. Pressure setting is adjustable. Includes 5/16'' and 1/4'' hose barbs and 2ft normal pressure hose with connector. (Tubing not supplied, see #4028, #4080, #4081 and clamps #4010 #4014) Learn More
All-purpose 10-10-10 balanced liquid fertilizer for lawns and gardens.
- Ideal for use with pull-behind sprayers or ATV sprayers
- Apply for healthy lawns, vegetables and flowers
- 2.5 gallons covers up to 15,000 square feet
Hydrosorb Pump Filter Kit absorbs water and helps contain microbials that foster mild growth and fuel discoloration.
- Kit Includes
- Filter Head
- Filter Canister
- 3/4 x 5 Pipe Nipple
- 3/4 Street L
- For use with FR1210C, FR1202 and FR610 Pumps
- Fits 3/4" Inlets
- Hydrosorb Pump Filter Kit absorbs water and helps contain microbials that foster mild growth and fuel discoloration
- Kit Includes
The KM 125 Uni Pro Exact Seat Cover fits the KM 125 Uni Pro and KM JD Gator seat. Also fits the Milsco XB180 seat. Made with durable Endura fabric. One-piece custom fit cover made for a perfect fit. Cover is water-resistant and equipped with a grommet drain hole. It has a flexible design which makes for easy installation. Machine washable. Comes individually packaged with installation instructions.Learn More
The KM 125 Uni Pro Exact Seat Cover fits the KM 125 Uni Pro and KM JD Gator seat. Also fits the Milsco XB180 seat. Made with durable Endura fabric. One-piece custom fit cover made for a perfect fit. Cover is water-resistant and equipped with a grommet drain hole. It has a flexible design which makes for easy installation. Machine washable. Comes individually packaged with installation instructions. Available in yellow, black and camo.Learn More
- FKM (viton type) seals
- PTFE self-lubricating stem bushings and seats cannot stick or bind.
- Precision molded in polypropylene.
- Polypropylene is reinforced with fiberglass for additional strength.
- Self-aligning ball moves freely against the PTFE seats for smooth operation.
- Banjo Valve opens and closes with very little pressure on the handle.
- Ball is diamond turned, after molding, to make it spherically perfect, which provides precise contact between ball and seats.