KING KUTTERS PROFESSIONAL DUAL EDGE LAND GRADER is the perfect tool for driveway and gravel road maintenance and construction. It fills pot holes and low spots, while removing the high spots and redistributing the material to achieve a perfectly finished roadway surface. It uses 1/4" thick side plates and 1/2" thick wear plates, along with 3" X 3" heavy tubing to make up the main frame that ensures that your new land plane will perform well on farms and ranches as well as in landscaping and contractor applications.
- Width: 72"
- Hitch Category: Cat 1
Complete seat and suspension kit for CIH 71, 72 & 89 Magnum 4WD Series tractors with original air suspension.
The KM 1003 Uni Pro is a deluxe seat/suspension assembly. The variable shock air suspension has a self-contained 12-volt compressor and provides a smoother, more comfortable ride.
- Durable gray Tufftex fabric covering
- Reclining backrest
- Adjustable lumbar support
- Fore and aft isolator which can be disabled
- Height and weight adjustment
- Padded tilt-up armrests with angle adjustment
- Adjustable slide rails with 5" of travel
Case-IH 71, 72 & 89 Magnum 4WD Series with Original Air Suspension: 7110, 7120, 7130, 7140, 7150, 7210, 7220, 7230, 7240, 7255, 8910, 8920, 8930, 9110, 9130, 9150, 9170, 9180, 9190, 9210, 9230, 9240, 9250, 9260, 9270, 9280, 9310, 9330, 9350, 9370, 9380, 9390Learn More
Removing the hatching tray allowed us to space the trays further apart and have them turn to a steeper angle. The No. 1500 is exempt from use as a hatcher allowing it to avoid the mess associated with hatches and remain clean. This incubator only has to maintain one humidity setting making it easier on the eggs and easier to operate. The “PROFESSIONAL” is designed to be used with the No. 1550 HATCHER. We recommend purchasing the two together. Up to three No 1500’s can be used with one hatcher for a weekly production of chicks from a laying flock. The No. 1500 incubator offers an accurate digital thermostat with LCD display of Temperature and Humidity. An on-board computer monitors systems and the environment every second to keep itself updated and to share this data with you. Electronic egg turning control, audio/visual indicators and a standard easy view door highlight a number of features. Constructed from high strength plastic board making it well insulated, quieter, and easier to clean. Each unit is hand assembled by our skilled craftsmen and tested for a full 24 hours for proper operation and calibration. Thermostat operating range between 60 and 103 degrees F. depending on room temperature. 110-120VAC, 50/60 Hz, 325 Watts. TUV Listed. This incubator includes: - 1 #3258 Digital Command Center thermostat - 3 turning racks - 1 moisture pan with 2 wick pads - Instruction booklet. Total Capacity with plastic trays: 1368 Quail Eggs (set and hatch 250 per week), 354 pheasant eggs, 270 chicken eggs, 198 turkey or duck eggs, and 36-45 larger eggs such as goose, peafowl, and emu. Actual capacity may depend on egg size. Please see the egg trays for this incubator in the INCUBATOR ACCESSORIES section.
- DIMENSIONS: 30 1/4” Front to Back, 15 3/4” Wide, 31 3/4” High.
- METAL SETTING TRAYS, ITEM NO. 3067 ARE SOLD SEPARATELY AND NOT NECESSARY FOR OPERATION.
- PLEASE USE PLASTIC EGG TRAYS (0243,0245,0246)
Wit the King Kutter Pallet Fork Grapple you can now combine your skid steer's pallet forks with a grapple. If you already have pallet forks add this attachment. Skid steer or forklift use. Clamp down on loads to help stabilize them. The pallet fork grapple is secured by bolts under the unit to your pallet forksLearn More
- Welded light duty 2 1/2"x 2 1/2" angle iron frame for 5' and 6' models and 2" X 2" angle iron frame for 4' model.
- 7 1/2" spacing.
- Cast bearings.
- 1" square axles.
- Notched or smooth 16" blades.
- Recommended for a tractor of 15-35 hp.
The Square bale spear has larger tine diameters than the round bale spear. (1.75" max vs 1.4375" max) The tines are a product of Kverneland. The spear frame is made in U.S.A. Each model comes with a universal mount plate that fits to most skid loaders, and the bale spear's tapered spears & tines bolt into place for ease of shipment & future removal or replacement.Product Specifications
- Height: 19"
- Width: 46"
- Tine overall lengths: 32.3" & 48.8
- Tine usable lengths: 28" & 45"
- Tine maximum diameter: 1.75”
$978.97GQF has worked closely over the years with science departments at leading universities to produce the best quail breeding pens. Our latest improvement is the use of rubber coated wire. This wire is easier on the birds’ feet, allows the pens to withstand repeated cleaning with cage washers, power washers, or just a garden hose, and increases durability. Each section measures 10" x 24" and is adequate for up to 2 pair of Bobwhite or one cock and three hens. These pens have a large feed trough with a water trough on the back for easy filling and may be equipped with an automatic watering system. Correct slope of the floor permits eggs to roll out under feed trough for production of cleaner eggs with less damage and easier gathering. Intended for use with Bobwhite and Cortunix size birds. Galvanized steel section walls can be removed for colony breeding. Dimensions: 35" x 24" x 73". Shipped with Pens assembled and stand knocked down. Dropping pans included. SHOWN WITH OPTIONAL WHEELS, ITEM #0319 (NOT INCLUDED). Learn More
Complete seat and suspension kit for John Deere Late 30, 40, 50, 55 & 60 series Row Crop tractors with Sound-Gard cab. Includes: KM 401 Uni Pro seat/air suspension combo in brown fabric, self contained 12-volt compressor with fore and aft isolator, pedestal, install hardware and installation instructions.
The KM 401 Uni Pro is a deluxe seat and air suspension assembly that replaces the original deluxe mechanical suspension seat and provides a smoother, more comfortable ride. The air suspension has a self-contained 12-volt compressor which wires directly to the tractor's electrical system.
Fits John Deere 2950, 3030, 3040, 3130, 3140, 3150, 2155, 2355, 2555, 2755, 2955, 3155, 3255, 4000, 4030, 4040, 4050, 4230, 4240, 4250, 4255, 4430, 4440, 4450, 4455, 4555, 4560, 4630, 4640, 4650, 4655, 4755, 4760, 4840, 4850, 4855, 4955 and 4960.Learn More
Priefert’s Roping Chute Add-on Section helps lend speed and efficiency to any roping competition by allowing producers to keep steers staged and ready for the next run. Like our roping chutes, the add-on section features contoured sides that narrow at the bottom to discourage animals from turning around in the section. These contoured sides are made to the same specifications as our roping chutes to create a seamless flow from section to chute. Our sections also include a split tailgate at the rear that opens from either side. Cross bars over the top of the add-on section prevent animals from being able to jump out of the section. An Architectural Grade Powder Coat Finish with UV inhibitors adds years of life to your investment by helping the product resist rust, scratches, and fading.
The Priefert name has become synonymous with today’s roping industry. Priefert Roping Chutes and accessories are the number one choice of professional ropers and top organizations. The innovation behind every Priefert Roping Chute combined with their legendary durability, has changed the look and feel of the growing roping industry. Our chutes are the Official Chute of the PRCA, the National Finals Rodeo, the USTRC, the Priefert World Series of Team Roping, the NTRL, the George Strait Team Roping Classic, the BFI, and many more major roping organizations and events, making Priefert the chute of choice when big money is on the line!
- Overall Height: 64”
- Overall Width: 35”
- Inside Width at Top: 30”
- Inside Width at Bottom: 14”
- Overall Length: 73”
- Weight: 325 lbs (All weights approximate)
- Architectural Grade Powder Coat Finish
- Color: Priefert Blue
115-volt AC Super Duty Vane Pump for fuel with manual leaded nozzle. Delivers up to 30 GPM (113 LPM). Pump is UL Listed to U.S. and Canadian safety standards. Motor is UL Listed and CSA Certified. 1 in. NPT outlet.
- Unique strainer and poppet design allows for easy access and maintenance
- For use with diesel fuel (up to 20% biodiesel blends such as B20), Gasoline (up to 15% alcohol blends such as E15), Kerosene
Specifications Model M-3130-ML Design Type Vane Voltage 115 or 230 Volts AC Reads Gallons, Liters Mechanical Connection 1 1/4 in. Inlet, 1 in. Outlet Fitting NPT Flowrate Up to 30 GPM, Up to 114 LPM Nozzle Manual Duty Cycle 30 minutes on / 30 minutes off Power Cord None Hose 12 ft (3.7 m), 1 in. diameter Motor Protection Internal temperature-limiting device Suction Pipe None Approvals U.L. Listed Motor to U.S. and Candian Standards