3 Point Equipment & Accessories
Taylor-Way Gear-Driven Rotary Tillers have a rugged, reinforced main frame for years of dependable service. Available in 4’, 5’, 6’, or 7’ widths.
The heavy duty gear drive operates in an oil bath for dependable performance and reduced maintenance.
6-tines per flange requires less horsepower yet operates smoothly, especially in tough conditions.
Standard slip clutch 540 RPM drive line provides protection for drive components…a feature that’s optional on most other brands.
Tilling depth controlled by adjustable skid shoes – to a maximum 8” depth.
Standard heavy-duty rear deflector provides improved leveling and soil finish.
Reinforced main frame.
Recommended for tractors up to 65 HP
- 540 RPM Slipclutch drive line standard on Taylor-Way tillers, optional on most other brands
- Tilling depth is controlled by adjustable skid shoes – to a maximum of 8” depth
- Heavy duty gear drive gives smooth reliable performance. Oil bath operation provides constant lubrication for long life
- 6-tines per flange require less horsepower
- Heavy-duty steel rotor shaft
- Heavy-duty flanges built for years of hard work
KING KUTTER II GEAR DRIVEN ROTARY TILLERS are designed to perform with its heavy duty gear drive and square tube frame. With 6 tines per flange, you get maximum soil mix for preparing planting beds, gardens, incorporating fertilizer, landscaping, or other jobs. This Category 1 tiller includes a PTO shaft with heavy duty slip clutch. Available in 4, 5, and 6 ft. models. The 4 ft. model is offset to eliminate tire tracks.
- Width: 48"
- Number of Tines: 36
- Number of Flanges: 6
- Recommended PTO HP: 20-35
KING KUTTER'S GEAR DRIVEN XB-TILLER is a quality constructed tiller that is built to last. The adjustable skid shoes control the cutting depth while the rear shield controls the soil mix. Each tiller is equipped with a slip clutch to protect the cast iron gear driven center gear box and the gear driven side gear box. This unit has a 48" cutting width and is designed for sub-compact tractors up to 25 H.P.
- Limited CAT. 1 Hitch
- Slip Clutch Protected Drive Line
- 6 Tines Per Flange
- Adjustable Skid Shoes
- Cast Iron Center Gearbox
- Gear Driven Side Gearbox
- Parking Stand For Storing
KING KUTTERS PROFESSIONAL LAWN PLUGGER is designed to help control compaction and thatch build up on grassy surfaces such as lawns and athletic fields. The 15/16" beveled spoon easily penetrates the ground producing a clean hole which increases the soil's ability to intake water, nutrients, and oxygen. Water, nutrients, and oxygen are all important factors for root growth and overall turf health and the result is a healthier, greener, thicker grass. The heavy duty frame with built in weight boxes, is intended to hold weight for added down pressure on the spoons, when necessary. Dual parking stands ensures that you will never have to pick up your plugger, and the CAT. 1 quick hitch compatible hitch make it safer and easier to hook up.
- Width: 60"
- Hitch Category: Cat 1
The calf catching corral attachment rounds up newborn calves, separating calf from cow & cow from you. So you can work with out unwelcome interruptions. You separate the two by simply raising the skid steer corral attachment over the calf and then lowering the corral back to the ground so as to catch the calf inside the corral.Product Specifications
- Height: 60"
- Width: 72"
- Depth: 72"
- 1.5" X 2.5" corner
- 1" X 1" square steel tube
- 8" spacing between tubes
- Welded panels bolt together
- 1/4" thick, 20 inch tall side plates are formed smooth inside to prevent material clogging on the side of the grader.
- Center punched reversible cutting edges double the blade life.
- Edges are positioned below the skids for better cutting.
- Replaceable skid shoes are made of 1/2" x 3" steel.
- A-frame mast will fit any category II fast hitch or standard hitch.
KING KUTTERS PROFESSIONAL FLEX HITCH* ROTARY KUTTERS are the latest in Rotary Kutter innovation from King Kutter Inc. This rotary kutter features a Cat. 1 quick hitchable, flex hitch design, which is unlike any other on the market today. The unique hitch allows it to roll 15 Degrees up or down on the left or right side of the machine, which lets it follow the contours of your field like no rotary kutter before. Shown here with OPTIONAL front and rear chain guards. Another special features includes a sloped deck that sheds water and debris to prevent material from collecting on the deck. Whether mowing pastures, roadsides, parks, or easements, the King Kutter rotary kutter with Flex Hitch is the perfect kutter for you.
- Cutting Width: 72"
- Deck Thickness: 12 Ga.
- Hitch Category: Cat.1
Picture shows optional chain guards, that may be purchased separately.Learn More
This stout Rotary Tiller will allow you to work the toughest ground with ease. This solid tiller features a cast iron center gearbox that requires a 25-60 HP tractor. The gear driven side gearbox with heavy-duty slip clutch driveline allows this tiller to rip through any type of soil surface. Six self sharpening heat treated tines per flange with adjustable runners makes even the toughest job seem simple. This product is quick-hitch compatible and features our durable, corrosion-resistant powder coat gray finish.
- Heavy-duty, all gear driven, drive line
- Oil bath lubrication
- Self sharpening heat treated cutting tines
- Adjustable runners
- Working depths from 1" to 4"
- Category I hookup
- Comes with heavy-duty PTO shaft and slip clutch
- Easily remove tine shaft
- 25-60 HP required
- Measures 38" H x 64" W x 28" L
$1,495.97[description] Learn More
Use for manure and hay/straw clean-up. Plus this manure fork can also be used for light brush clearing. Large round tine design makes for easy after use wash-down. This for does not include grapple as image shows.Product Specifications
- 12 Tines
- Height: 32.5"
- Depth: 34"
- Usable Tine Length: 26.75"
- Replaceable Tines