3 Point Equipment & Accessories
KING KUTTER II GEAR DRIVEN ROTARY TILLERS are designed to perform with its heavy duty gear drive and square tube frame. With 6 tines per flange, you get maximum soil mix for preparing planting beds, gardens, incorporating fertilizer, landscaping, or other jobs. This Category 1 tiller includes a PTO shaft with heavy duty slip clutch. Available in 4, 5, and 6 ft. models. The 4 ft. model is offset to eliminate tire tracks.
- Width: 48"
- Number of Tines: 36
- Number of Flanges: 6
- Recommended PTO HP: 20-35
Field General's Sub Compact Tiller s a quality constructed tiller that is built to last. The adjustable skid shoes control the cutting depth while the rear shield controls the soil mix. Each tiller is equipped with a slip clutch to protect the cast iron gear driven center gear box and the gear driven side gear box. This unit has a 48" cutting width and is designed for sub-compact tractors up to 25 H.P. This tiller is a must for vegetable or hobby farmers, landscape contractors, nurseries and much more.
- Limited Category I Hitch
- Slip Clutch Protected Drive Line
- 6 Tines per Flange
- All Gear Driven
KING KUTTER'S GEAR DRIVEN XB-TILLER is a quality constructed tiller that is built to last. The adjustable skid shoes control the cutting depth while the rear shield controls the soil mix. Each tiller is equipped with a slip clutch to protect the cast iron gear driven center gear box and the gear driven side gear box. This unit has a 48" cutting width and is designed for sub-compact tractors up to 25 H.P.
- Limited CAT. 1 Hitch
- Slip Clutch Protected Drive Line
- 6 Tines Per Flange
- Adjustable Skid Shoes
- Cast Iron Center Gearbox
- Gear Driven Side Gearbox
- Parking Stand For Storing
- 18 to 25 Horse Power
The grass will look better on your side of the fence when you cut it with a King Kutter Finishing Mower. King Kutter Finishing Mowers are built with the quality and features that will make your lawn the envy of the neighbors. Mowing has never been easier because of the free floating flex hitch system. Uneven terrain? The free floating flex hitch system follows the contour of the ground giving you a rich, smooth, manicured look. King Kutter Finishing Mowers are designed with a 3/16” thick steel reinforced deck, 3 cast iron blade spindles with ball bearings, 1/4” thick heat treated blades and a 40 hp cast iron gearbox. King Kutter Finishing Mowers are available in 4’, 5’ and 6’ single belt designs for the homeowner and 6’ and 7’ *double “V” belt design for larger lawns or light commercial use.
- Cutting Width: 60"
- Blade Size: 1/4"x2"x20"
- Blade Tip Speed - FPM: 16,249
- Pneumatic Tires: 4 - 9 x 3.5
Picture shows optional chain guards, that may be purchased separately.Learn More
This rock bucket from Blue Diamond Attachments scoops up all the rocks and leaves the dirt behind. The 3" spacing between the 3/8" thick tines, is ready to do some heavy duty scooping. The bucket is 36" deep and 20" high.Learn More
KING KUTTER'S ROTARY KUTTER is a quality constructed, durable Kutter that's built to last. Constructed with rugged I-beam side rails, and a single sheet top deck that is fully reinforced with cross and spider bracing. Standard features include cast iron gearbox, stump jumper, adjustable laminated tail wheel and shielded PTO with a shear pin (slip clutch optional on most models).
- Cutting Width: 72"
- Cutting Height: 4.0 - 8.0"
- Gearbox Rating: 40 HP
- Deck Thickness: 10 GA
- Blade Size: 1/2 x 3 x 30"
KING KUTTERS PROFESSIONAL BOX FRAME DISC HARROWS are constructed of heavy steel square tubing. It connects to Category 1 Quick Hitch. The disc gang axles are made of 1" square high carbon steel rods mounted on double thrust sealed steel bearings. These disc harrows have four angle adjustments of 16 degrees, 30 degrees, 44 degrees, and 57 degrees with an easy single bolt adjustment.
- Width: 78"
- Number of Blades: 20
- Blade Diameter: 18"
Taylor Pittsburgh Taylor Way 6' 2" 377 Series Disc Harrow with 18" Notched Front and 18" Round Rear Blades 377-16-18CO99$1,379.97
The Series 377 is a heavy-duty disc harrow designed for medium to low acreage applications. Suitable for tractors from 30-50 HP. This disc features a tubular frame in a weight class rugged enough for the farmer or landscaper, yet commercial enough for the part-timer.
- Heavy duty 3”x3” tubular steel frame
- 1” Square High Carbon Gang Axles
- Sealed Ball Bearings
- Cat I Straddle Mount, 3-Point Hitch
- Quick Hitch Compatible
- Adjustable Gang Angle: 2.3, 11.3, 20.9, 27.8 degrees
- 71/2” blade spacing (9” spacing optional)
- Durable cast spacer spools
- Average weight per blade of 45 lbs.
- 18” Diameter Blades
- Available with all Cut Out, Round or Combination Discs
$1,423.97[description] Learn More
Extending a skid-steer buckets usefulness, a grapple often helps speed work along. CJJ, Inc's grapple can be use with a variety of buckets. Weld in place. The rams used are of standard design, making any future repair or replacement simple. Flow controls help to control grapple speed. When the grapple is used with a bucket attachment, it can be used to move many materials, brush to logs.
- Width: 50”
- Tine spacing: 18.25"
- Mounting: weld-on
- Approx. shipping weight: 365 lbs.