3 Point Equipment & Accessories
KING KUTTER II GEAR DRIVEN ROTARY TILLERS are designed to perform with its heavy duty gear drive and square tube frame. With 6 tines per flange, you get maximum soil mix for preparing planting beds, gardens, incorporating fertilizer, landscaping, or other jobs. This Category 1 tiller includes a PTO shaft with heavy duty slip clutch. Available in 4, 5, and 6 ft. models. The 4 ft. model is offset to eliminate tire tracks.
- Width: 48"
- Number of Tines: 36
- Number of Flanges: 6
- Recommended PTO HP: 20-35
Field General's Sub Compact Tiller s a quality constructed tiller that is built to last. The adjustable skid shoes control the cutting depth while the rear shield controls the soil mix. Each tiller is equipped with a slip clutch to protect the cast iron gear driven center gear box and the gear driven side gear box. This unit has a 48" cutting width and is designed for sub-compact tractors up to 25 H.P. This tiller is a must for vegetable or hobby farmers, landscape contractors, nurseries and much more.
- Limited Category I Hitch
- Slip Clutch Protected Drive Line
- 6 Tines per Flange
- All Gear Driven
KING KUTTERS PROFESSIONAL GEAR DRIVEN ROTARY TILLERS are ideal for preparation of seed beds, renovation of pastures, orchards, vineyards and mulching-in cover crops and stubble. With 6 tines per flange, they provide a uniform mixture throughout cultivated depth and produce loose textured soil that holds moisture and reduces erosion. This Category 1 tiller is Quick Hitch compatible and includes a PTO shaft with heavy duty slip clutch.
- Width: 48"'
- Number of Tines: 36
- Approx. HP: 20-35
KING KUTTER'S BOX FRAME DISC HARROWS are constructed of heavy steel square tubing. It connects easily to any three-point hitch with category one specifications. The disc gang axles are made of 1" square high carbon steel rods mounted on double thrust sealed steel bearings. These disc harrows have four angle adjustments of 16 degrees, 30 degrees, 44 degrees, and 57 degrees with an easy single bolt adjustment.
- Width: 6 1/2'
- Number of blades: 20
- Blade Diameter: 18"
- Blade Thickness: 3.0 MM
The grass will look better on your side of the fence when you cut it with a King Kutter Finishing Mower. King Kutter Finishing Mowers are built with the quality and features that will make your lawn the envy of the neighbors. Mowing has never been easier because of the free floating flex hitch system. Uneven terrain? The free floating flex hitch system follows the contour of the ground giving you a rich, smooth, manicured look. King Kutter Finishing Mowers are designed with a 3/16” thick steel reinforced deck, 3 cast iron blade spindles with ball bearings, 1/4” thick heat treated blades and a 40 hp cast iron gearbox. King Kutter Finishing Mowers are available in 4’, 5’ and 6’ single belt designs for the homeowner and 6’ and 7’ *double “V” belt design for larger lawns or light commercial use.
- Cutting Width: 60"
- Blade Size: 1/4"x2"x20"
- Blade Tip Speed - FPM: 16,249
- Pneumatic Tires: 4 - 9 x 3.5
Picture shows optional chain guards, that may be purchased separately.Learn More
KING KUTTER'S GEAR DRIVEN XB-TILLER is a quality constructed tiller that is built to last. The adjustable skid shoes control the cutting depth while the rear shield controls the soil mix. Each tiller is equipped with a slip clutch to protect the cast iron gear driven center gear box and the gear driven side gear box. This unit has a 48" cutting width and is designed for sub-compact tractors up to 25 H.P.
- Limited CAT. 1 Hitch
- Slip Clutch Protected Drive Line
- 6 Tines Per Flange
- Adjustable Skid Shoes
- Cast Iron Center Gearbox
- Gear Driven Side Gearbox
- Parking Stand For Storing
- 18 to 25 Horse Power
The finger tines, with 3 in. spacing, allow the dirt/sand and gravel to fall away while the rocks collect in the skeletal rock bucket. The rocks ride in a curved shaped pocket, that helps them from rolling out freely. Great for sifting, sorting and screening differently sized materials of many types .
- Rock or stone.
- 3 inch finger tine spacing.
- Tines and sides A50 steel.
- Top cross bar A50 steel.
- Bucket is 68 inches.
240 Series Round Back Rotary Cutters are constructed using 11 gauge for the top sheet and 10 gauge on the side skirts for added strength. They come equipped with your choice of a 50 HP shear bolt or slip clutch gearbox. Available in 4’, 5’ and 6’ widths with Category I hitches. This is a quality manufactured cutter that can be purchased for an affordable price
- Cat I Hitch
- 11 Gauge Top Deck Thickness
- 10 Gauge Side Skirt Thickness
- 50 HP Gearbox
- Available in 4’, 5’ and 6’
Extending a skid-steer buckets usefulness, a grapple often helps speed work along. CJJ, Inc's grapple can be use with a variety of buckets. Weld in place. The rams used are of standard design, making any future repair or replacement simple. Flow controls help to control grapple speed. When the grapple is used with a bucket attachment, it can be used to move many materials, brush to logs.Product Specifications
- Width: 60”
- Tine spacing: 18.25"
- Mounting: weld-on
- Approx. shipping weight: 370 lbs.
The Series 377 is a heavy-duty disc harrow designed for medium to low acreage applications. Suitable for tractors from 30-50 HP. This disc features a tubular frame in a weight class rugged enough for the farmer or landscaper, yet commercial enough for the part-timer.
- Heavy duty 3”x3” tubular steel frame
- 1” Square High Carbon Gang Axles
- Sealed Ball Bearings
- Cat I Straddle Mount, 3-Point Hitch
- Quick Hitch Compatible
- Adjustable Gang Angle: 2.3, 11.3, 20.9, 27.8 degrees
- 71/2” blade spacing (9” spacing optional)
- Durable cast spacer spools
- Average weight per blade of 45 lbs.
- 18” Diameter Blades
- Available with all Cut Out, Round or Combination Discs