3 Point Equipment & Accessories
The finger tines, with 3 in. spacing, allow the dirt/sand and gravel to fall away while the rocks collect in the skeletal rock bucket. The rocks ride in a curved shaped pocket, that helps them from rolling out freely. Great for for sifting, sorting and screening differently sized materials of many types.Product Specifications
- Inside Width: 72 1/2"
- Inside Depth: 38"
- Overall Depth: 45 1/2"
- Overall Height: 211/2"
- Tine Width: 3/8"
- Tine Spacing: 3"
The Series 377 is a heavy-duty disc harrow designed for medium to low acreage applications. Suitable for tractors from 30-50 HP. This disc features a tubular frame in a weight class rugged enough for the farmer or landscaper, yet commercial enough for the part-timer.
- Heavy duty 3”x3” tubular steel frame
- 1” Square High Carbon Gang Axles
- Sealed Ball Bearings
- Cat I Straddle Mount, 3-Point Hitch
- Quick Hitch Compatible
- Adjustable Gang Angle: 2.3, 11.3, 20.9, 27.8 degrees
- 71/2” blade spacing (9” spacing optional)
- Durable cast spacer spools
- Average weight per blade of 45 lbs.
- 20” Diameter Blades
- Available with all Cut Out, Round or Combination Discs
The grass will look better on your side of the fence when you cut it with a King Kutter Finishing Mower. King Kutter Finishing Mowers are built with the quality and features that will make your lawn the envy of the neighbors. Mowing has never been easier because of the free floating flex hitch system. Uneven terrain? The free floating flex hitch system follows the contour of the ground giving you a rich, smooth, manicured look. King Kutter Finishing Mowers are designed with a 3/16” thick steel reinforced deck, 3 cast iron blade spindles with ball bearings, 1/4” thick heat treated blades and a 40 hp cast iron gearbox. King Kutter Finishing Mowers are available in 4’, 5’ and 6’ single belt designs for the homeowner and 6’ and 7’ *double “V” belt design for larger lawns or light commercial use.
- Cutting Width: 60"
- Blade Size: 1/4"x2"x20"
- Blade Tip Speed - FPM: 16,249
- Pneumatic Tires: 4 - 9 x 3.5
Picture shows optional chain guards, that may be purchased separately.Learn More
Field General's Sub Compact Finish Mowers are built with all the quality and features of larger finish mowers. The free floating flex hitch system, allows the mower to follow the contours of the ground to deliver and exceptional cut.Product Features
- Heavy Duty Steel Deck
- Heavy Duty Cast Iron Gear Box
- Single Belt with Easy Adjustment System
- Turf Friendly - 4 Ply Pnuematic Tires
- Shielded PTO Shaft with Shear Pin
- Anti-Scarp Roller
- Fully Baffled Deck
- Easy Height Adjustment
- Rear Discharge Unit comes with chain guards as optional equipment
- Available in side and rear discharge units
KING KUTTER'S ROTARY KUTTER is a quality constructed, durable Kutter that's built to last. Constructed with rugged I-beam side rails, and a single sheet top deck that is fully reinforced with cross and spider bracing. Standard features include cast iron gearbox, stump jumper, adjustable laminated tail wheel and shielded PTO with a shear pin (slip clutch optional on most models).
- Cutting Width: 72"
- Cutting Height: 4.0 - 8.0"
- Gearbox Rating: 60 HP
- Deck Thickness: 10 GA
- Blade Size: 1/2 x 3 x 30"
This rock bucket from Blue Diamond Attachments scoops up all the rocks and leaves the dirt behind. The 3" spacing between the 3/8" thick tines, is ready to do some heavy duty scooping. The bucket is 36" deep and 20" high.Learn More
$1,423.97[description] Learn More
KING KUTTERS PROFESSIONAL BOX FRAME DISC HARROWS are constructed of heavy steel square tubing. It connects to Category 1 Quick Hitch. The disc gang axles are made of 1" square high carbon steel rods mounted on double thrust sealed steel bearings. These disc harrows have four angle adjustments of 16 degrees, 30 degrees, 44 degrees, and 57 degrees with an easy single bolt adjustment.
- Width: 78"
- Number of Blades: 20
- Blade Diameter: 18"
Extending a skid-steer buckets usefulness, a grapple often helps speed work along. CJJ, Inc's grapple can be use with a variety of buckets. Weld in place. The rams used are of standard design, making any future repair or replacement simple. Flow controls help to control grapple speed. When the grapple is used with a bucket attachment, it can be used to move many materials, brush to logs.
- Width: 50”
- Tine spacing: 18.25"
- Mounting: weld-on
- Approx. shipping weight: 365 lbs.