3 Point Equipment & Accessories
KING KUTTER II GEAR DRIVEN ROTARY TILLERS are designed to perform with its heavy duty gear drive and square tube frame. With 6 tines per flange, you get maximum soil mix for preparing planting beds, gardens, incorporating fertilizer, landscaping, or other jobs. This Category 1 tiller includes a PTO shaft with heavy duty slip clutch. Available in 4, 5, and 6 ft. models. The 4 ft. model is offset to eliminate tire tracks.
- Width: 72"
- Number of Tines: 54
- Number of Flanges: 9
- The depth is adjustable with the maximum cutting depth of 8”
- Recommended for tractors with 35-50 HP
KING KUTTERS PROFESSIONAL GEAR DRIVEN ROTARY TILLERS are ideal for preparation of seed beds, renovation of pastures, orchards, vineyards and mulching-in cover crops and stubble. With 6 tines per flange, they provide a uniform mixture throughout cultivated depth and produce loose textured soil that holds moisture and reduces erosion. This Category 1 tiller is Quick Hitch compatible and includes a PTO shaft with heavy duty slip clutch.
- Width: 60"'
- Number of Tines: 42
- Approx. HP: 25-40
KING KUTTER'S HEAVY DUTY KUTTERS are designed to meet the needs of any tough job. It is constructed of extra heavy material, 8" I-Beam side rails, and a 3/16" single sheet top deck that is fully reinforced with cross and spider bracing, this Kutter is built to perform. Each kutter has a splined cast iron gearbox, a shielded PTO shaft with slip clutch, a solid 3/4" thick steel plate blade carrier, a heavy duty wheel fork(s), a top link swivel, and adjustable laminated tail wheel(s).
- Cutting Width: 84"
- Gearbox Rating: 80 HP
- Deck Thickness: 3/16"
- Blade Size" 1/2 x 4 x 30"
Picture shows optional chain guards, that may be purchased separately.Learn More
KING KUTTERS PROFESSIONAL GEAR DRIVEN ROTARY TILLERS are ideal for preparation of seed beds, renovation of pastures, orchards, vineyards and mulching-in cover crops and stubble. With 6 tines per flange, they provide a uniform mixture throughout cultivated depth and produce loose textured soil that holds moisture and reduces erosion. This Category 1 tiller includes a PTO shaft with heavy duty slip clutch. This tiller is a forward rotating tiller.
- Width: 72"
- Number of Tines: 54
- Approx. HP: 35-50
- John Deere Green
- Square Tube Frame
- 1 1/8" Axels
- Heavy 9" Spacers
- Ball Bearings
- Double U Bolts
- Drop Down Clevis Hitch
Taylor-Way Gear-Driven Rotary Tillers have a rugged, reinforced main frame for years of dependable service. Available in 4’, 5’, 6’, or 7’ widths.
The heavy duty gear drive operates in an oil bath for dependable performance and reduced maintenance.
6-tines per flange requires less horsepower yet operates smoothly, especially in tough conditions.
Standard slip clutch 540 RPM drive line provides protection for drive components…a feature that’s optional on most other brands.
Tilling depth controlled by adjustable skid shoes – to a maximum 8” depth.
Standard heavy-duty rear deflector provides improved leveling and soil finish.
Reinforced main frame.
Recommended for tractors up to 65 HP
- 540 RPM Slipclutch drive line standard on Taylor-Way tillers, optional on most other brands
- Tilling depth is controlled by adjustable skid shoes – to a maximum of 8” depth
- Heavy duty gear drive gives smooth reliable performance. Oil bath operation provides constant lubrication for long life
- 6-tines per flange require less horsepower
- Heavy-duty steel rotor shaft
- Heavy-duty flanges built for years of hard work
Whether your area receives just a few flakes or a lot, the King Kutter snow bucket is designed to handle them. This skid steer bucket attachment can take on a variety of snow conditions. The overall height of our snow bucket is 34”. A large light material bucket, like this can also be used year-round to move material such as sawdust, sunflower hulls and other bedding material. Ask about this bucket's optional bolt-on double bevel replacement blade. It's an optional cutting edge that can be flipped around to reveal a new edge, helping you manage wear. Bucket is 96 inches.Learn More
Taylor Pittsburgh Taylor Way 8' 8500 Series Rear Blade with Hydraulic Offset, Angle, & Tilt 8500-RMB-96HHH$2,806.97
The 8500 Series Heavy Duty Rear Blades have the added features that make any heavy duty job easier than ever. Fully adjustable and constructed for strength, the 8500 is an excellent choice for leveling, ditching, landscaping, road maintenance, snow removal and more.
- Mechanical or Hydraulic Adjustments on Angle, Offset and Tilt Functions
- 3 Working Widths
- Reversible Cutting Edge
- Reversible Curved Moldboard
- Heavy 4”x 4” x 3/8” Main Tube
- Straddle Type Combination 3-Point Hitch
- Optional End Plates & Skid Shoes
Prepare land for planting, incorporate fertilizer or landscape with the King Kutter Gear-Driven Rotary Tiller. It features a heavy-duty gear drive and rugged slip clutch to tackle even the toughest terrain. Each of the nine flanges has six tines to maximize the soil mix.
- 72 Inch Gear-Driven Rotary Tiller
- Heavy-duty gear drive & square tube frame
- Six tines per flange
- Nine flanges with a total of 54 tines
- 35-50 HP gearbox rating
- Includes a PTO shaft with heavy-duty slip clutch
- Category 1 hitch
- Other sizes/models available by special order
- Reverse Rotation Tiller
The Classic Series has the traditional trademarked Lowe look while incorporating the latest in performance and durablity features. All of this at a lower price than the previous models.
NOTE: Lowe chain-reduction auger drive units come standard with a 2 9/16" diameter through- hardened round drive shaft. A 2" (51 mm) diameter hex drive shaft is optional.
Works very well in harder to penetrate soil. Often used on larger skid steer loaders and small backhoes. Will handle auger bits as large as 36 inches in certain digging conditions. Should have 14-25 gpm.Learn More