3 Point Equipment & Accessories
KING KUTTERS PROFESSIONAL GEAR DRIVEN ROTARY TILLERS are ideal for preparation of seed beds, renovation of pastures, orchards, vineyards and mulching-in cover crops and stubble. With 6 tines per flange, they provide a uniform mixture throughout cultivated depth and produce loose textured soil that holds moisture and reduces erosion. This Category 1 tiller is Quick Hitch compatible and includes a PTO shaft with heavy duty slip clutch.
- Width: 48"'
- Number of Tines: 36
- Approx. HP: 20-35
The grass will look better on your side of the fence when you cut it with a King Kutter Finishing Mower. King Kutter Finishing Mowers are built with the quality and features that will make your lawn the envy of the neighbors. Mowing has never been easier because of the free floating flex hitch system. Uneven terrain? The free floating flex hitch system follows the contour of the ground giving you a rich, smooth, manicured look. King Kutter Finishing Mowers are designed with a 3/16” thick steel reinforced deck, 3 cast iron blade spindles with ball bearings, 1/4” thick heat treated blades and a 40 hp cast iron gearbox. King Kutter Finishing Mowers are available in 4’, 5’ and 6’ single belt designs for the homeowner and 6’ and 7’ *double “V” belt design for larger lawns or light commercial use.
- Cutting Width: 60"
- Blade Size: 1/4"x2"x20"
- Blade Tip Speed - FPM: 16,249
- Pneumatic Tires: 4 - 9 x 3.5
Picture shows optional chain guards, that may be purchased separately.Learn More
Field General's Sub Compact Finish Mowers are built with all the quality and features of larger finish mowers. The free floating flex hitch system, allows the mower to follow the contours of the ground to deliver and exceptional cut.Product Features
- Heavy Duty Steel Deck
- Heavy Duty Cast Iron Gear Box
- Single Belt with Easy Adjustment System
- Turf Friendly - 4 Ply Pnuematic Tires
- Shielded PTO Shaft with Shear Pin
- Anti-Scarp Roller
- Fully Baffled Deck
- Easy Height Adjustment
- Rear Discharge Unit comes with chain guards as optional equipment
- Available in side and rear discharge units
Skid steer loader bucket with teeth. Heavy duty low profile design. Built tough. Great for use on a construction, farm, ranch, or landscaping job site.Product Specifications
- Overall depth: 39.5” less teeth
- Overall height: 22”
- Inside width: 82”
- Inside depth: 36” less teeth
- Wrapper: A36 steel
- 3/8 " steel skid plates
KING KUTTER'S ROTARY KUTTER is a quality constructed, durable Kutter that's built to last. Constructed with rugged I-beam side rails, and a single sheet top deck that is fully reinforced with cross and spider bracing. Standard features include cast iron gearbox, stump jumper, adjustable laminated tail wheel and shielded PTO with a shear pin (slip clutch optional on most models).
- Cutting Width: 72"
- Cutting Height: 4.0 - 8.0"
- Gearbox Rating: 60 HP
- Deck Thickness: 10 GA
- Blade Size: 1/2 x 3 x 30"
The King Kutter Skid Steer Rock Bucket finger tines, with 3 in. spacing, allow the dirt/sand and gravel to fall away while the rocks collect in the skeletal rock bucket. The rocks ride in a curved shaped pocket, that helps them from rolling out freely.
- Great for sifting, sorting and screening differently sized materials of many types .
- Rock or stone.
- 3" finger tine spacing.
- Tines and sides A50 steel.
- Top cross bar A50 steel.
- 75 inch bucket.
This rock bucket from Blue Diamond Attachments scoops up all the rocks and leaves the dirt behind. The 3" spacing between the 3/8" thick tines, is ready to do some heavy duty scooping. The bucket is 36" deep and 20" high.Learn More