3 Point Equipment & Accessories
Rural King has 3 point equipment and accessories that you need by King Kutter and other brands. The King Kutter brand for thirty years has been a manufacturer of short line farm equipment. Their reputation is known for dependability and value. Whether you are looking for accessories, replacement parts, or 3 point equipment such as spreaders or finish mowers you are sure to find just what you need in the large selection offered at Rural King.
If you need a finish mower we have those. For instance, you can get a King Kutter 5' Finish Mower. If you need a seeder to put on the back of your ATV, there is the Buyers Products 15 Gallon 12 volt Rear ATV Seeder. There is also available the King Kutter 5 Bushel Pull Behind Spreader. The King Kutter Wire Un-roller makes handling wire safer and quicker.
If you need blades, v-belts, gear boxes, washer kits, wheels, bearings, 3point post hole diggers, wire stretchers, or any other 3 point accessories parts you can find what you need. Keeping your lawn clean and beautifully mowed will make you the envy of your neighbors. Doing garden or farm work can be made easier by purchasing the 3 point equipment and accessories, at Rural King, or on the website at www.ruralking.com.
KING KUTTER'S GEAR DRIVEN XB-TILLER is a quality constructed tiller that is built to last. The adjustable skid shoes control the cutting depth while the rear shield controls the soil mix. Each tiller is equipped with a slip clutch to protect the cast iron gear driven center gear box and the gear driven side gear box. This unit has a 48" cutting width and is designed for sub-compact tractors up to 25 H.P.
- Limited CAT. 1 Hitch
- Slip Clutch Protected Drive Line
- 6 Tines Per Flange
- Adjustable Skid Shoes
- Cast Iron Center Gearbox
- Gear Driven Side Gearbox
- Parking Stand For Storing
- 18 to 25 Horse Power
KING KUTTER II GEAR DRIVEN ROTARY TILLERS are designed to perform with its heavy duty gear drive and square tube frame. With 6 tines per flange, you get maximum soil mix for preparing planting beds, gardens, incorporating fertilizer, landscaping, or other jobs. This Category 1 tiller includes a PTO shaft with heavy duty slip clutch. Available in 4, 5, and 6 ft. models. The 4 ft. model is offset to eliminate tire tracks.
- Width: 48"
- Number of Tines: 36
- Number of Flanges: 6
- Recommended PTO HP: 20-35
The calf catching corral attachment rounds up newborn calves, separating calf from cow & cow from you. So you can work with out unwelcome interruptions. You separate the two by simply raising the skid steer corral attachment over the calf and then lowering the corral back to the ground so as to catch the calf inside the corral.Product Specifications
- Height: 60"
- Width: 72"
- Depth: 72"
- 1.5" X 2.5" corner
- 1" X 1" square steel tube
- 8" spacing between tubes
- Welded panels bolt together
The Series 377 is a heavy-duty disc harrow designed for medium to low acreage applications. Suitable for tractors from 30-50 HP. This disc features a tubular frame in a weight class rugged enough for the farmer or landscaper, yet commercial enough for the part-timer.
- Heavy duty 3”x3” tubular steel frame
- 1” Square High Carbon Gang Axles
- Sealed Ball Bearings
- Cat I Straddle Mount, 3-Point Hitch
- Quick Hitch Compatible
- Adjustable Gang Angle: 2.3, 11.3, 20.9, 27.8 degrees
- 71/2” blade spacing (9” spacing optional)
- Durable cast spacer spools
- Average weight per blade of 45 lbs.
- 18” Diameter Blades
- Available with all Cut Out, Round or Combination Discs
Use for manure and hay/straw clean-up. Plus this manure fork can also be used for light brush clearing. Large round tine design makes for easy after use wash-down. This for does not include grapple as image shows.Product Specifications
- 12 Tines
- Height: 32.5"
- Depth: 34"
- Usable Tine Length: 26.75"
- Replaceable Tines
The finger tines, with 3 in. spacing, allow the dirt/sand and gravel to fall away while the rocks collect in the skeletal rock bucket. The rocks ride in a curved shaped pocket, that helps them from rolling out freely. Great for for sifting, sorting and screening differently sized materials of many types.Product Specifications
- Inside Width: 79 1/2"
- Inside Depth: 38"
- Overall Depth: 45 1/2"
- Overall Height: 211/2"
- Tine Width: 3/8"
- Tine Spacing: 3"
KING KUTTER'S ROTARY KUTTER is a quality constructed, durable Kutter that's built to last. Constructed with rugged I-beam side rails, and a single sheet top deck that is fully reinforced with cross and spider bracing. Standard features include cast iron gearbox, stump jumper, adjustable laminated tail wheel and shielded PTO with a shear pin (slip clutch optional on most models).
- Cutting Width: 72"
- Cutting Height: 4.0 - 8.0"
- Gearbox Rating: 40 HP
- Deck Thickness: 10 GA
- Blade Size: 1/2 x 3 x 30"