3 Point Equipment & Accessories
KING KUTTER'S FREE FLOATING FLEX-HITCH REAR DISCHARGE FINISHING MOWERS lead the way in performance and quality. It is constructed of heavy 3/16" deck material, heavy-duty wheels, and heat-treated 1/4"-thick blades. The versatile machine mows on level or unleveled ground. Standard equipment on all King Kutter free floating finishing mowers includes a 40hp gearbox, shielded PTO shaft, gauge wheels and a self-tightening belt that reduces slippage. King Kutter's specially designed free floating flex hitch system allows the mower to follow the contour of the ground, thus mowing evenly on uneven ground. This Rear Discharge Mower has a totally open rear deck with belt guards that allow the grass to be safely and smoothly discharged giving your lawn that rich, manicured look that will make your lawn the envy of the neighborhood.
- Cutting Width: 84"
- Blade Size: 1/4" x 2" x 28"
- Bade Tip Speed - FPM: 19,204
- Pneumatic Tires: 4 - 9 x 3.50
The rock bucket grapple is an extremely versatile attachment. Pick up rocks, clean up job-sites, clear brush, dress yards, carry logs and firewood. With 3/8" bucket tines, 1/2" grapple tines, enclosed cylinders and grease fitting on pivot points this grapple bucket is ready for the hard work.Learn More
Skid steer loader bucket with teeth. Heavy duty low profile design. Built tough. Great for use on a construction, farm, ranch, or landscaping job site.Product Specifications
- Overall depth: 39.5” less teeth
- Overall height: 22”
- Inside width: 94”
- Inside depth: 36” less teeth
- Wrapper: A36 steel
- 3/8 " steel skid plates
Four in one skid steer attachments have many uses, and you most likely already have an idea of how you would use a versatile combination bucket attachment like this. It's one of those things you may purchase to help you with a single problem but end up using in many different ways.Product Specifications
- Overall width: 66"
- Overall depth: 38.5"
- Overall height: 29"
- Inside width: 64.75", 70.75" or 82.75"
- Inside depth: 31"
- Shipping weight: 66"/727 lbs.
- Bucket edge: .75" X 6" - C1055 steel
- Bucket side: .25" A36 steel
KING KUTTER'S HEAVY DUTY KUTTERS are designed to meet the needs of any tough job. It is constructed of extra heavy material, 8" I-Beam side rails, and a 3/16" single sheet top deck that is fully reinforced with cross and spider bracing, this Kutter is built to perform. Each kutter has a splined cast iron gearbox, a shielded PTO shaft with slip clutch, a solid 3/4" thick steel plate blade carrier, a heavy duty wheel fork(s), a top link swivel, and adjustable laminated tail wheel(s).
- Cutting Width: 72"
- Gearbox Rating: 80 HP
- Deck Thickness: 3/16"
- Blade Size" 1/2 x 4 x 30"
Picture shows optional chain guards, that may be purchased separately.Learn More
The King Kutter Manure Fork is used for manure and hay/straw clean-up. Plus this manure fork can also be used for light brush clearing. With its 72 inch large round tine design it makes for an easy after use wash-down.Learn More
Have you been pushing to get a new snow handling attachment for your skid steer? This plow has two hydraulic rams to aid the blade's center pivoting action, adjustable spring tensioners, a replaceable bolt on cutting wear edge, plus dual adjustable height skid pads. Plow winter out of your way. Snow plow has two double acting hydraulic rams for right/left pivoting action. Blade pivot of +/- 30 degrees.Learn More
The King Kutter brush clearing attachment is designed with open side wall design. The open side wall design on this brush bucket makes carrying a longer than bucket width item easier. Grapple is welded in place. Buckets come in widths of 68 inch or 75 inch.Learn More