Agricultural Sprayers & Chemicals
RM43™ 43% Glyphosate Plus Weed Preventer Total Vegetation Control can be used as a bareground treatment to prevent vegetation for up to one year or for spot control of brush, vines, and weeds along fencerows, around farm buildings, on vacant lots, along roadsides, and more.
- Use on non-crops areas:
- Parking areas
- Brick walks
- Gravel paths
- Vacant lots
- Warehouse areas
- Around farm buildings and barns
- Agricultural uncultivated areas
- Farm yards
- Farm premises
- For establishment and maintenance of wildlife openings.
Apply to locations only where no vegetation growth is desired for up to one year.
Apply to bare ground or when weeds are present. If weeds are taller than six inches, mow or cut down weeds and remove debris before treatment, and allow for 2 weeks of new growth. If woody vines or brush is mowed or cut, wait until full leaf formation before treatment.
To prevent growth of weeds under asphalt driveways, play areas, tennis courts and parking areas, apply this product before laying surfacing materials.
Treat area uniformly to maximize results.
Re-treatment every 6 to 8 months may be necessary in areas of heavy rainfall.
This 31 Gallon Flex Pond has the form and perks of a molded pond with the adaptability of a pond liner. The easy installation makes for a quick setup!
Dimensions: 44"L X 32"W X 13"Learn More
- 170 GPM Pump-with the ability to go under water
- Square Plant Basket
The Outdoor Water Solutions Heavy Duty Weed Cutter is great for mechanical removal of weeds both in and around your pond. This 28" double-sided serrated weed cutter comes with a 2 piece rust proof, powder coated 11' long aluminum handle and has an aluminum frame. Use it to cut floating aquatic weeds and vegetation along the edges of your pond. Also works great on cattails and phragmites.
The Heavy Duty Weed Cutter Includes:
- 11' 2 piece powder coated aluminum handle
- 28" wide reinforced serrated cutting blade head
- Snap pin handle design for easy assembl/disassembly
This is a great product when you want to clean up around the edges and don't want to use a lot of commercial chemicals. Great for controlling aquatic weeds and controlling aquatic vegetation!
This is the best weed cutter on the market!
66" Handle Extension Also availableLearn More
OWS searched far and wide to come up with a rubber membrane diffuser that can generate a ton of air! What's even better is that this is a low psi design, which means your windmill or electric aerator doesn't have to struggle to open up the perforated slits like it would with some rubber membranes on the market.
This 9" membrane is used in the water treatment industry to really move the water through it's precision perforated slits. Unit comes with a backflow valve and 1/2" fittings to plug into your 1/2" airline. Rated for up to 5 CFM and perfect for lakes or ponds, especially where you're only running one diffuser.
This diffuser also comes with a base that can be filled with sand or gravel so it sinks to the bottom of your pond.Learn More
Sonar, the leader in aquatic herbicides, now offers an easy and effective formula that requires no mixing, no special equipment, or even a boat. Now, thanks to Sonar Ready-To-Use (RTU), anyone can take control of aquatic weed management. Simply apply this improved formula from the shoreline and, within weeks, the targeted plants will begin to turn white and wilt away. Recommended for man-made or natural ponds that have limited or no outflow.
No other treatment is more effective against duckweed. Often spread from one body of water to the next by waterfowl and other wildlife, duckweed is one of the most common and most persistent aquatic weeds. And while it may look like algae, it is actually a plant. And because it reproduces so rapidly, your pond can become completely covered in duckweed in just a matter of weeks. Before your pond and its fish population and its recreational uses begin to suffer, treat with Sonar RTU. Its active ingredient, fluridone, targets and controls weeds right down to their roots. And any of the product that is not absorbed by plants is quickly broken down simply by sunlight. Sonar guarantees results. See manufacturer’s label for details.
For best and long-lasting results, apply to your pond at the first sign of weed growth. Application rates may vary, but for a ¼ acre pond with an average depth of 4 feet, one quart of Sonar RTU should be used for the initial treatment. In 21 days, a follow-up application of ½ quart should be applied. Then one more application of ½ quart should be used 42 days after the initial treatment. Sonar RTU-treated water should not be used for irrigating crops, ornamental plants, or established turf for at least 30 days after the final treatment. Similarly, do not use these treated waters for watering seedling grasses, new crops, or other plantings for 60 days following the last application.
- 1 quart container
- 3.8% fluridone
- Easy, ready-to-use formula
- No special equipment needed
- Effective against a verity of aquatic weeds, including duckweed, milfoil, hydrilla, coontail, and lilies
Cannot sell to the following states: California, Connecticut, Maine, New Jersey, New York, Oregon, and WashingtonLearn More
The Outdoor Water Solutions Lake & Beach Rake is a great tool for removing algae, muck, leaves, sticks and other items from your pond or lake. This 36" wide aluminum rake comes with a 11' two piece rust proof, powder coated handle, detachable float and a 50' length of polypropylene rope. Great for skimming floating aquatic vegetation and algae from the water. You can also shorten the handle and remove the float, giving you a high quality landscaping rake, excellent for dressing beach sand and shore edges.
The Lake & Beach Rake Includes:
- 36" Wide Aluminum Head
- 11' 2-piece powder coated aluminum handle
- Detachable polyethylene float
- 50' of polypropylene rope
- Snap pind handle design for easy assembly and disassembly
This item is recommended by many pond professionals as a great way to clean up pond weeds, algae, muck, leaves, tree limbs, etc.. from around the edges of your pond or lake - without having to use a lot of chemicals.
Optional 66" extension kit availableLearn More
Do you have an existing windmill tower? Maybe it's 50 or even 100 years old. Why not use your existing tower and add one of our windmill heads to it making it either an upgraded Ornamental windmill or a fully functional Aeration windmill.
Our new windmill retrofit kit gives you a 30" high quality DOM steel receiver with a PVC insert and grease zert. This receiver can either be bolted into or welded into the top of your existing windmill tower allowing our windmill head to slide into the receiver making for an easier conversion.Learn More
Renovate OTF (On-Target Flake) is a granular form of Renovate 3. OTF is perfect for spot treating Eurasian water milfoil along beaches and around docks. Renovate OTF is also the better formulation of Renovate for deep water applications.
We are unable to ship this item outside of the US.Learn More