- The edges of this mat have no tapering and are square cut.
- Spheroid surface shape
- Item will be shipped via Motor Freight, too large and bulky for UPS.
- Exercise Mat
- 4' x 6' x 3/4"
$31.98The Farm Innovators Bucket Heater is a submergible bucket heater and is designed to heat 5 gallons of water up to 110ºF.Product Features:
- 1000 watts
- Safe in plastic
- Designed to heat 5 gallons of water up to 110 degrees F.
- Thermostatically controlled to regulate the water temperature between 85 and 110 degrees F
A heavy-duty hog feeder that will stand up to the toughest use. Heavy-gauge steel is extra thick in the trough and feed doors. The deep trough has a feed-saver lip to conserve feed. The feed door is specially designed to keep out moisture and pests, but can easily be wired open for starting pigs. The top door flips open from the back for easy loading from the rear or outside the pen. Slots in back side for mounting on wall or rail. Ships completely assembled. 19 inch long by 12.75 inch wide by 29.5 inch high, 50-lb. capacity.
- Heavy-gauge steel with slots for hanging
- Deep trough with feed-saver lip
- Feed door specially designed to keep out moisture and pests, but can be wired open for starting pigs
- Top door for easy loading
- Completely assembled, 50-lb. capacity.
This large-capacity Automatic Poultry Waterer features a vacuum-sealing O-ring cap that creates an automatic water flow. Made of dent-proof, heavy-duty translucent plastic that allows you to see the water level. The easy-to-fill jar snaps compactly onto the base, and the rugged handle makes transport around the yard easy. This is a durable unit that will stand up to plenty of use. 16 inch-diameter octagon by 14.75 inch high, holds 3 gallons.
- Large-capacity Automatic Poultry Waterer with vacuum-sealing O-ring cap creates an automatic water flow
- Dent-proof, heavy-duty translucent plastic allows view of water level
- Easy-to-fill jar snaps onto base
- Rugged handle makes transport easy
- Holds 3 gallons
These easy assembly hutches are constructed with rust-resistant, easy to clean wire mesh, doors are surrounded by protective vinyl guards and feature spring tension door latches. Wire mesh bottom is 1/2in x 1in and sides are 2in x 1in.
- Please note: A wire crimping tool (sold separately) will be needed to assemble this cage.
- **** Pet lodge Wire Clip Pliers ACP2, SKU: 007841136
The Ecoflex Fontana Chicken Barn ECHK103-B is designed to be a safe haven for your chickens! This barn will house up to 6 full sized hens and is built to be durable and weather resistant. The Fontana Chicken barn can be used as an independent stucture or can be attached to the Ecoflex Fontana Chicken Pen ECHK103-P (sold seperately) to make a larger enclosed area for your chickens.
- Made from Ecoflex, an eco composite resistant to moist, warp, crack, split
- Long lasting without maintenance
- Non-absorbent and odor repellent
- Easy clean
- A blend of recycled polymers and wood byproducts, Ecoflex exhibits the best characteristics of the polymers and wood that forms the basis for the material
- Ecoflex doesn't warp, twist or crack from changes in temperature and humidity making easier and further extending life
- Wood and Plastic Frame
- Nesting Box Included
- Height: 28.9 Inches
- Width: 52.8 Inches
- Depth: 28.5 Inches
GQF Box Brooders are designed to eliminate stress in young birds by providing plenty of heat, fresh air, light, feed and water space, and sanitary conditions for a confined area. Three clear plastic panels allow full and easy viewing of the brooder’s interior. Each brooder comes with three 28.5' troughs which maybe used for either feed or water. Ample feed and water space is necessary to allow weaker chicks access in the presence of more dominant chicks.
Any trough may be equipped with optional automatic watering to provide the large quantity of water necessary. Failure to provide proper feed and water space can result in slower weight gain and perhaps higher chick mortality. The troughs are mounted on the outside of the brooder so that the chicks do not mix droppings into the food or water. The 300-watt heater provides sufficient heat while the vented plastic side panels keep out drafts.
As chicks are drawn to light rather than heat, each heater has a socket for a low wattage attraction light bulb (2 bulbs included), which helps to hold the chicks in the heated area. Each brooder comes with a thermometer and a wafer thermostat, which is accurate to 1 degree.
The floor is a thin wire ½” mesh which will allow droppings to easily pass through. For small chicks like quail this floor requires that a layer of No 1628 DACB paper or paper towels be laid down on the wire for the first 4 to 7 days after which quail may stand on the ½” wire floor.
Day old poultry and ducks can be placed directly on the wire. Drop pans are made of lightweight aluminum for long life. Drop pans can be easily pulled out even when brooders are stacked and the wire floor is heavy with birds.
- This box brooder is universal as each side panel comes with an adjustable gate to regulate openings for chick size.
- 32” X 38” X 12” Approx. capacity to 4th week - 100 quail - 50 Chukar or Pheasants. Poultry Chick capacity - 100 chicks through 2 weeks.
- Shipped in 2 cartons.
- (Needs #5001 Feeder & Waterer for game
Priefert's single horse hay and grain feeder features a welded metal hay rack and a rounded bottom feed tub, making it ideal for feeding hay or grain. This sturdy feeder is constructed from 16 guage sheet metal. The inside of the feeder is lined with a 1/8 inch thick durable poly liner to rsist corrosion from salts. Convenient mounting brackets allow you to hang the feeder from up to 2 inches OD tubing or lumber, making it the perfect feeder for use in paddocks, pastures, and more. The architectural grader powder coat finish helps the product to resist rust, scratches and fading to add years of life to you investment.
- This sturdy single horse feeder is ideal for feeding hay or grain.
- The welded metal hay rack is designed to be loaded from the top, with grain fed below in the rounded bottom tub.
- The inside of the feeder is lined with a 1/8 inch thick durable poly liner.
- Constructed from 16 - guage steel, designed to withstand the physical abuse commonly inflected by stalled horses.
- Convenient mounting brackets allow you to hang the feeder from up to 2 inch OD tubing or lumber.
- Architectural grade powder coat finish with UV inhibitors.
- Height - 29 Inches
- Width - 21 Inches
- Depth - 19 Inches
- Weight - Approx. 50 Pounds