Perfect for large dogs or horses, or where a large tank cannot be used. 130 watts of power. Thermostatically controlled. Sturdy bail allows bucket to be hung in stall. Cord exits from back or bottom of pail to prevent chewing. Tested to withstand temperatures to 20 below zero. The heating element is coiled between 2 walls in bottom of bucket. The cord is 67" long including plug-bottom of bucket has grooves for cord to stick out from either back or side. Keeps water form freezing but does not act as a water warmer.The element is not exposed. UL tested and approved. Thermostat turns on at approximately 38 degrees and off at 50 degrees. Shuts off if bucket runs empty. 1-year warranty. The heating element will not turn on until temperature gets cold enough.
- Holds Five Gallons (20 Quarts).
- 130 Watts of Power.
- Thermostatically Controlled.
- Sturdy Bail Allows Bucket to be Hung in Stall.
- Cord Exits from Back or Bottom of Bucket to Prevent Chewing.
- Withstands Temperatures Up to 20 degrees below Zero.
Unlike other screened bottom boards on the market, ours have a sliding solid bottom that allows you to control the amount of ventilation that you need without having to disturb the hive.
Hands down the best on the market!
- 45 degree slanted front landing board integrated with the bottom board, solid constructed sides for long term use
- HLH Screened Bottom board is engineered and designed by beekeepers for beekeepers.
- Heavy gauge galvanized steel mesh for the screened center.
- Solid sliding bottom.
- Usage: Screened bottom boards are used to provide ventilation to the hive.
This "all seasons" heated poultry fountain is thermostatically controlled to keep water from freezing during the winter. It has an electrical connection on the base year
- Holds 3 gallons of water
These large capacity waterers are dent-proof and easy to fill. The vacuum-sealing cap creates an automatic water flow. The rugged handle makes transport around the yard easy. Jar snaps compactly onto base.Learn More
The Triplex Nesting Box is a 36" x 12" x 12", three hole nesting box made from 3/8" Ply Wood. When assembled with the provided screws it makes for a very solid nesting box for all weather conditions. Panels come pre-drilled for ease of assembly.
- Easy assembly
- Heavy duty plywood
Accessory for the Still Air Incubator-9200. Transforms the Still Air Incubator into a Circulated Air Incubator. Fan kit improves egg hatching conditions by circulating a constant flow of warm air throughout the Incubator. Recommended for environments with frequent temperature fluctuations.
- Plastic & Steel
- Dimensions (L x W x H):4.25 x 4 x 3.5
These easy assembly hutches are constructed with rust-resistant, easy to clean wire mesh, doors are surrounded by protective vinyl guards and feature spring tension door latches. Wire mesh bottom is 1/2in x 1in and sides are 2in x 1in.
- Please note: A wire crimping tool (sold separately) will be needed to assemble this cage.
- **** Pet lodge Wire Clip Pliers ACP2, SKU: 007841136
$34.35Complete with Pressure Reducing Valve, 5 feet tubing, ready to screw onto water faucet, adjustable water level, 9'' diameter, 4'' overall height with bowl height of 2''. Gives 28'' of watering space. Learn More
Prevue Pet Products Clean Life Bird Cage Stand White 872 is a heavy-duty tubular steel cage stand, with a strong 4 leg support base. Designed to accommodate all Prevue Clean Life Cages with a base size of 24-Inch L by 14-Inch W. Easily assembled and featuring a White epoxy coated finish.
- Locks into Clean Life Cage base for added stability
- Sturdy 4 leg support base with storage shelf
- Easy to assemble
- White epoxy-coated finish
- 28 Inches Long
- 18 Inches Wide
- 28 Inches High
These stainless steel spurs feature a 1-3/4" shank, a 1/2" band and a 10 point rowel. Ladies' size.Learn More