Hanging feeders save floor space, reduce waste by eliminating scratching, and cut down on debris in the feed. Constructed of heavy-gauge galvanized steel for many years of service, with rolled edges for safety. Hanging handle included. Tube is 10.75 inch diameter by 13.875 inch high; pan is 14.25 inch diameter by 2.25 inch high. Holds approximately 30 pounds of feed.
- Little giant hanging feeders are constructed of heavy gauge galvanized steel with rolled edges for safety.
- Saves floor space
- Reduces feed waste by eliminating scratching
- Cuts down on debris in the feed
- Hanging handle included
- Holds approximately 30 pounds of feed
$20.97Substitution of poultry feeding equipment for game bird chicks has always been quite a problem to the game breeder. Poultry chick feeders permit the game chicks to get inside the feed and their droppings create an exceedingly unsanitary and unhealthy condition. Our Chick Feeder for Quail, Chukar, Pheasant, etc. prevents the contamination of feed. The plastic feeder will hold five pounds of feed. The feed is on a continuous flow basis so that the oldest feed is eaten first. The most important of all the chicks do not have droppings in the feed. Size 12 1/4'' long, 6'' wide, 5 1/2'' high, gives 24 1/2'' of feed space. Will fit in GQF Box Brooders. Learn More
$22.976 plastic Universal Egg Racks for Hova-Bator automatic turners. Turner not included, racks only. Learn More
The Duplex Nesting Box is a 24" x 12" x 12", two hole nesting box made from 3/8" Ply Wood. When assembled with the provided screws it makes for a very solid nesting box for all weather conditions. Panels come pre-drilled for ease of assembly.
- Easy assembly
- Heavy duty plywood
Little giant galvanized waterers are constructed of heavy gauge galvanized steel and are available in four different sizes. Edges are rolled for safety and feature arched inner handles for added strength. Copper spring and neoprene seal produce a positive water shut-off. Seams are constructed and tested to prevent leaks. Double wall founts also feature a locking pin.
12.25 diameter by 10.75 high, holds 2 gallons.Learn More
$22.25Plastic hatching tray for current production 1202A, 1402, 1450, 1502, and 1550 cabinet model incubators and hatchers. No cover necessary. 29'' long 5'' sides 14'' wide. Learn More
$22.97This is the most accurate incubator thermometer available and has approximately a 4' stem which can be inserted in a 5/32' hole to permit reading of temperature from outside of incubator. The 2' dial permits easy and accurate reading of temperature and is graduated in one degree increments from 25 degrees to 125 degrees. (Standard equipment on all cabinet model incubators). Wicks are attached and placed in the humidity pan to allow thermometer to read wet bulb temperatures. THIS THERMOMETER SHOULD BE USED IN CIRCULATED INCUBATORS ONLY. Learn More
$22.97Supplied with 4 ft. garden hose to fit faucet. Make your own automatic equipment by using this reliable valve in your own containers for poultry, livestock, and game breeding equipment. Works in GQF water troughs and humidity pans. Maximum Pressure 50 Psi. Learn More
New All Plastic Water Fount for Quail and Pheasants chicks. May be purchased together or separately. Bowl is 3/4'' high and has 1/2'' wide drinking space to provide adequate water but prevents chicks from drowning. Not necessary to use rocks or marbles as with poultry waterers. New Large Plastic Jar (short half gallon -58 oz.) Holds large supply of water and will fit in battery brooders Eliminates frequent filling.Learn More
$22.95DESIGN YOUR OWN WATERING SYSTEM - A system with one or two cups or a large system using up to 210 cups. Each DRINK CUP can handle up to 40 Quail. INEXPENSIVE PRESSURE REDUCING VALVE can be used for small system of one or two cups or large system to handle up to 1500 Quail. Purchase cups, brackets, tubing and fittings for your system below. DRINK CUP IS THE MOST SANITARY WATERING SYSTEM AVAILABLE - These cups have a spring loaded trigger stem for positive shut off of water. Water flows only when the birds beak is in the cup. No messy wet spots as with nipple drinkers. DESIGNING A SYSTEM - Drink cups require a source of water at a pressure below 5 lbs. PSI which is provided by a pressure reducing valve, or by gravity tanks (less than five feet above drinkers). Use with 5/16' tubing. Learn More