Tractor Parts & Accessories
Farmers rely on tractors to work their fields, plant and harvest their crops, and care for their farmland. That's why Rural King offers a wide selection of Tractor Parts and Accessories designed to keep those all-important tractors in proper working order. Break downs are a part of life and even more so a part of farming, but they do not have to keep your tractor out of commission for long. Rural King has a variety of tractor parts to help you get your machine up and running again as quickly as possible. Browse Rural King's tractor parts and accessories for everything from disk blades, cultivators, lubricants, hitch pins, and more.
In addition to several tractor parts, Rural King also provides a multitude of tractor accessories. Seed testers, spray tanks, bale elevators, seat covers, and tool boxes are just a few of the many accessories you can find in Rural King's tractor parts and accessories department. Rural King also offers important safety materials such as safety lights that allow your tractor to be seen when moving from field to field and umbrellas that protect your skin from the harsh rays of the sun.
aAce Roto-Mold septic tanks are stronger, easier to install, and less costly than old-fashioned concrete septic tanks- yet they still offer the quality construction and safety you expect. Manufactured from high-density polyethylene with U.V. inhibitors, Ace Roto-Mold tanks utilize a horizontal flow designed for below ground installations up to 36 inches. The 1000, 1250 and 1500 gallon double-compartment septic tanks have been tested by NSF to meet the IAPMO Z1000 and CAN/CSA-B-66 standards.
Each tank carries an individual serial code and is fully document from date of manufacture. Ace Roto-Mold septic tanks are designed and manufactured with rigorous quality controls. The trapezoidal deep-rib design and interior baffle system make Ace Tanks the industry choice.
Only Ace tanks feature a custom-molded gasket in the lid. Manufactured from extruded Nitrile rubber, the gasket snaps into the lid and ensures a watertight seal. Our exclusive lid design locks in place with nylon ties, eliminating the need for metal fasteners that can corrode and fail. Ace’s unique tank baffle system slows the flow of wastewater and directs it to the middle of the tank so wastewater can separate from solids. An outlet baffles allows the partially treated liquids to flow out for further treatment. Advantages of Ace’s baffle design include added strength, versatility, and ease of installation. Septic tanks are available in one-compartment and two-compartment designs and are manufactured for containment of liquids up to 1.7 specific gravity.
- Capacity - 1,250 Gallon - Single Compartment
- Weight - 443 Pounds
- Dimensions - 58 x 118 x 72
Regular Price: $2.19
Special Price: $1.97
For use between main feed lines and terminating ends of spray boomsLearn More
Regular Price: $3.29
Special Price: $2.96
- Used in fluid plumbing applications to connect a FPT thread to a reduced size of a MPT fittings.
- 1 1/2" Male Threads; 1 1/4" Female Threads
- Made of durable Polypropylene
Vertical – Dome Top tanks are free standing with a flat bottom for indoor or outdoor installations. Ace Roto-Mold Vertical Tanks conform to the requirements of NSF/ANSI Standard 61. Tanks are manufactured from medium- or high-density polyethylene with U.V. inhibitors. Tank walls are translucent for level viewing and equipped with gallon indicators.
- Capacity - 5,000 Gallons
- Weight - 1.302 Pounds
- Lid - 16"
- Fitting - 3"
- Dimensions - 102 x 156
- Specific Gravity - 1.7
Elliptical Tanks can be selected for stationary or transportable (non DOT approved) applications both indoors and outdoors. The elliptical tank lowers the center of gravity to enhance stability and visibility. The tanks feature a standard 2-1/2” collection sump on the bottom for full drain out. An 8-1/2” deep sump option is available on five sizes. Sump is located directly under the lid on standard tanks, but a center sump option is available on tanks from 500-1250 gallons. These tanks require the bottom to be fully supported with a cradle for use. The tanks are manufactured from medium-density polyethylene with U.V. stabilizers and are designed for containment of liquids of up to 1.7 specific gravity. Tank walls are translucent for level viewing and equipped with gallon indicators.
- Capacity - 500 Gallons
- Weight - 163 Pounds
- Dimensions - 57x82x36
- Lid - 8"
- Fitting - 3/4" & 1 1/4"
Cone Bottom Tanks are selected when a more complete drain out of stored chemical is required in indoor or outdoor installations. Tanks require stands to support the conical bottoms. Tanks are manufactured from medium- or high-density polyethylene with U.V. inhibitors. Tank walls are translucent for level viewing and equipped with gallon indicators.
- Capacity - 800 Gallons
- Weight - 182 Pounds
- Dimensions - 86 x 48
- Overall Height - 58"
- Lid - 16"
- Fitting -2"
- Specific Gravity - 1.7