Tractor Parts & Accessories
This 24", 10 HP, aeration fan with starter from Spread-All will get the job done every time. It is galvanized to prevent rust, and with a Baldor motor, you will experience years of worry free air movement.
Either the intake or the discharge ends may be mounted to an air duct metal transition or a flat wall bin
Reversible application to pull air down through the grain, or to direct the air flow up through the grain by turning the fan around and reversing the guard
Completely factory assembled and test run before shipment
Standard legs, stands, & carrying handles
Zinc Guard & Metal Fan Blade
King Kutter's Rotary Kutters are a quality constructed, durable Kutter that's built to last. Constructed with rugged I-beam side rails, and a single sheet top deck that is fully reinforced with cross and spider bracing. Standard features include cast iron gearbox, stump jumper, laminated tire with adjustable tailwheel and shielded PTO with a shear pin (slip clutch optional on most models). These Kutters are available in 40" , 4', 5', & 6' widths and offer gearbox choices of 40 & 60 Hp. Optional Front & Rear Chain Guards are AvailableLearn More
Tuthill/Fill-Rite 115/230V High Flow AC Pump 3/4 HP UL Motor, 900D Meter, 1"x18' Hose, 1" Ultra High Flow Automatic Nozzle FR319VB$1,299.99
High Flow AC Utility Rotary Vane Pumps. With a flow rate few pumps can match. the FR319VB has an open flow rate of 35 GPM. This pump provides long life. Explosion-proof UL listed dual voltage 3/4 HP motor (115 and 230 VAC)Motor has sealed bearings, heavy-duty switch and thermal overload protection Built-in junction box Cast iron pump housing with iron rotor and carbon vanes Check valve, pressure relief valve and strainer assembly, Automatic bypass valve, 2" threaded bung for tank openings. 901 Meter Included, 1" Automatic Ultra High Flow Nozzle 2 Year Warranty
Features & Benefits
- 35 GPM/132 LPM 27 GPM/102 LPM at end of Nozzle
- 3/4 HP Motor
- UL/cUL Listed Pump and Motor
- Heavy Duty Cast Iron Construction
- 2 Year Warranty
- 2" Threaded Bung for Tank Openings
- Iron Rotor with Carbon Rotary Vanes
- Self Priming
- Check Valve, Pressure Relief
- 900D Meter
- 1" Ultra High Flow Nozzle
- 1" x 18' foot hose with Static Wire
- 4-digit mechanical register
- 6 gpm–40 gpm
- Heavy-duty materials
- Powder coat finish
- Universal nozzle boot
- Compatible with:
- Diesel fuel
- Gasoline & gasoline/alcohol
- Fuel oil
- Lubricating oil (up to 60W lubricating oil; not temperature dependant)
- 3/4" elbow in junction box so pulser can be wired directly into junction box
- New opening to accommodate pulser wiring.
- Two openings in junction box, now 3/4" for easier wiring blends
- Elbow Size: 3/4 in
- Flow Rate: 6 - 40 gpm
- Finish: Powder Coat
- Mechanical Register: 4-digit
Vertical – Dome Top tanks are free standing with a flat bottom for indoor or outdoor installations. Ace Roto-Mold Vertical Tanks conform to the requirements of NSF/ANSI Standard 61. Tanks are manufactured from medium- or high-density polyethylene with U.V. inhibitors. Tank walls are translucent for level viewing and equipped with gallon indicators.
- Capacity -2,050 Gallons
- Weight - 402 Pounds
- Lid - 16"
- Fitting - 2"
- Dimensions - 86 x 93
- Specific Gravity - 1.7
Cone Bottom Tanks are selected when a more complete drain out of stored chemical is required in indoor or outdoor installations. Tanks require stands to support the conical bottoms. Tanks are manufactured from medium- or high-density polyethylene with U.V. inhibitors. Tank walls are translucent for level viewing and equipped with gallon indicators.
- Capacity - 2,450 Gallons
- Weight - 437 Pounds
- Dimensions - 90 x 114
- Overall Height - 125"
- Lid - 16"
- Fitting -2"
- Specific Gravity - 1.7
aAce Roto-Mold septic tanks are stronger, easier to install, and less costly than old-fashioned concrete septic tanks- yet they still offer the quality construction and safety you expect. Manufactured from high-density polyethylene with U.V. inhibitors, Ace Roto-Mold tanks utilize a horizontal flow designed for below ground installations up to 36 inches. The 1000, 1250 and 1500 gallon double-compartment septic tanks have been tested by NSF to meet the IAPMO Z1000 and CAN/CSA-B-66 standards.
Each tank carries an individual serial code and is fully document from date of manufacture. Ace Roto-Mold septic tanks are designed and manufactured with rigorous quality controls. The trapezoidal deep-rib design and interior baffle system make Ace Tanks the industry choice.
Only Ace tanks feature a custom-molded gasket in the lid. Manufactured from extruded Nitrile rubber, the gasket snaps into the lid and ensures a watertight seal. Our exclusive lid design locks in place with nylon ties, eliminating the need for metal fasteners that can corrode and fail. Ace’s unique tank baffle system slows the flow of wastewater and directs it to the middle of the tank so wastewater can separate from solids. An outlet baffles allows the partially treated liquids to flow out for further treatment. Advantages of Ace’s baffle design include added strength, versatility, and ease of installation. Septic tanks are available in one-compartment and two-compartment designs and are manufactured for containment of liquids up to 1.7 specific gravity.
- Capacity - 1,250 Gallon - Double Compartment
- Weight - 489 Pounds
- Dimensions - 58 x 118 x 72
Elliptical Tanks can be selected for stationary or transportable (non DOT approved) applications both indoors and outdoors. The elliptical tank lowers the center of gravity to enhance stability and visibility. The tanks feature a standard 2-1/2” collection sump on the bottom for full drain out. An 8-1/2” deep sump option is available on five sizes. Sump is located directly under the lid on standard tanks, but a center sump option is available on tanks from 500-1250 gallons. These tanks require the bottom to be fully supported with a cradle for use. The tanks are manufactured from medium-density polyethylene with U.V. stabilizers and are designed for containment of liquids of up to 1.7 specific gravity. Tank walls are translucent for level viewing and equipped with gallon indicators.
- Capacity - 1,250 Gallons
- Weight - 400 Pounds
- Dimensions - 78x92x60
- Lid - 16"
- Fitting - 1 1/4" & 2"
Free Standing Leg Tanks are selected when transportable (non DOT approved)containment is required for indoor or outdoor applications. Leg Tanks are equipped with molded-in legs to support the tank and band locators for tie down. Tanks are manufactured from medium- or high-density polyethylene with U.V. inhibitors and designed for containment of liquids of up to 1.7 specific gravity. Tank walls are translucent for level viewing and equipped with gallon indicators.
- Captivity - 1,300 Gallons
- Weight - 425 Pounds
- Dimensions - 62 x 114
- Lid - 16"
- Fitting - 2"
This Cabinet Meter is constructed from heavy duty 16-gauge steel and powder coated to withstand any conditions. Hood removal is fast and easy. Just remove three screws and the reset knob and you are able to access it. This cabinet is pulser-ready and all external wiring connections are located in easy to reach positions. Use with 300 and 700 series pumps. Compatible with gasoline and diesel.
- Flow Rate: 6-40 GPM / 23-151 LPM
- Inlet/Outlet: 1"/1"
- Meter: 4 Digit Mechanical (Liter)
- Certification: UL/cUL