Tractor Parts & Accessories
Retrieve moisture readings on the go with the Dickey John M3G Portable Moisture Tester. All you need to obtain an accurate moisture reading a simple scoop from the hoppers or bins. No cups or screw on caps. This unit comes with Corn, Soybeans and Wheat preprogrammed calibrations. This means that the M3G is ready to work for you right out of the box. Simply select your grain type with the push of a button and you are ready to test.
- Test up to three grains
- Preprogrammed calibrations for:
- Corn (9-31%)
- Soybeans (8-22%)
- Wheat (8-20%)
Featuring 0.5 repeatability with normal stored grain, this technologically advanced unit lets you easily bias to match readings to local elevator tests. Select grain types with the push of a button, and change grain calibrations with a simple download.Learn More
- Planter Harness with 37 Pin AMP Connector
- pinned for CIH Cyclometer III Monitors
- 40 inch row spacing with (2) 60 inch rows, (2) 100 inch rows
- Weather Pack connector ends
- Has leads for Hopper, Air, Drum
- 18ft Tongue
Vertical - Flat Top tanks feature additional flats for fitting installation or mounting. Tank are free standing with a flat bottom for indoor or outdoor installations. Ace Roto-Mold Vertical Tanks conform to the requirements of NSF/ANSI Standard 61. Tanks are manufactured from medium- or high-density polyethylene with U.V. inhibitors. Tank walls are translucent for level viewing and equipped with gallon indicators.
- Capacity - 135 Gallons
- Weight - 45 Pounds
- Lid - 8"
- Fitting - 1"
- Dimensions - 28 x 59
- Specific Gravity - 2.0
The IH 1600 Combine Headliner is a quality one-piece precut headliner that will help make the inside of your tractor cab look like new. Color: Grey (Berkshire).
Fits International-Harvester 1640, 1660 and 1680.
Please Note: Cab Foam Kit (PN: 4037) is also available. Floor Mat (PN: 4315) is also available.
Muffler & Pipe Kit converts underhood muffler to above hood muffler and vertical exhaust pipe.
Application: 2840 (late s/n), 2940, 2950. 2955, 3055, 3150 and 3155 (non-turbo) diesel engine.
Kit contains: Manifold to muffler pipe has flared inlet, muffler, above hood pipe, clamps and raincap.
- Muffler: Vertical-Oval Body. Shell 5-1/2" x 9-1/2"
- Inlet Length (A): 2-1/2"
- Inlet I.D. (B): 2-3/4"
- Shell Length (C): 17-1/2"
- Outlet Length (D): 4-1/2"
- Outlet O.D. (E): 2-3/4"
- O/A Length (F): 24"
- Weight in LBS: 22
The REI ST-1000 AM/FM/WB Stereo Radio w/ D6 Connector 701189D6 is perfect for use with School Buses, Transit Buses, Motor Coach, Shuttle Buses and AG/Construction Equipment.
- Digital Tune and Seek
- Front AUX Input
- 18FM/12AM/6WB Presets
- 50 Watts Power
PCO tanks can be selected for stationary or transportable (non DOT approved) applications both indoors and outdoors. The tanks have a rounded bottom for best fluid drainage and a 2” deep sump option is also available. PCO tanks must be securely anchored for use in transportable applications and galvanized steel bands are available for this purpose. PCO300-37 comes with an internal baffle for support and fluid control. The tanks are manufactured from medium-density polyethylene with U.V. inhibitors and designed for containment of liquids of up to 1.7 specific gravity.
- Capacity - 100 Gallons
- Weight - 50 Pounds
- Dimensions - 30 x 38 x 31
- Lid - 8"
- Fitting - 1" Learn More
Bulkhead fittings and syphon tubes are available for Ace Roto-Mold tanks in the following sizes. Standard fittings that come included with each tank are listed in each tank table. A syphon tube is included with the purchase of all Pick Up Tanks and all Vertical Tanks 300 gallons or greater. Fittings listed below are available as additions to tanks ordered with multiple fittings. Both fittings and syphon tubes are available as replacement parts.
- Description - 2" Stainless Steel Heavy Duty BulkHead
- Hole Requirement - 3 1/4"
- FOR TANKS OVER 3,000 GALLONS
- Capacity - 150 x 30 Gallons
- Weight - 57 Pounds
- Bands - 2.75 x 55
These batch tanks are designed for indoor applications. Perfect for batch chemical/mixer mounting systems. Both polyethylene and metal stands designed for all styles make these tanks very versatile. The Cone Bottom tanks require the use of a stand for support. All tanks feature 8” lids and one standard fitting. Gallon/liter indicators are included on one side of the tanks. Open Top tanks include bolt-on lid for access. Optional polyethylene hinged lid is available for open top tanks. Tanks are designed for the containment of chemicals with a specific gravity of 2.0 or less. Tanks are manufactured from medium-density polyethylene with U.V. inhibitors. 55 and 100 gallon tanks include 1-1/2" standard fitting, 145-325 gallon tanks include 2" standard fitting.
- 23" Poly Cone
- Weight - 45 lbs