McAfee SECURE sites help keep you safe from identity theft, credit card fraud, spyware, spam, viruses and online scams

ORDER BY PHONE:

1-800-561-1752

7AM - 5PM CST 7 Days a Week

BLACK FRIDAY SNEAK PEEK

Get an early view of our Black Friday specials

FREE SHIPPING*

ON ORDER $99+

View Details

Tractor Parts & Accessories

Tractor Parts & Accessories

Items 1-10 of 53

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Grid List

Set Ascending Direction
  1. Spread-All 10HP, 1PH, 230V with Starter Aeration Fan SA-2410001

    Spread-All 10HP, 1PH, 230V with Starter Aeration Fan SA-2410001

    $1,229.97

    This 24", 10 HP,  aeration fan with starter from Spread-All will get the job done every time.  It is galvanized to prevent rust, and with a Baldor motor, you will experience years of worry free air movement. 

    • 24” fan

    • Either the intake or the discharge ends may be mounted to an air duct metal transition or a flat wall bin

    • Reversible application to pull air down through the grain, or to direct the air flow up through the grain by turning the fan around and reversing the guard

    • Completely factory assembled and test run before shipment

    • Standard legs, stands, & carrying handles

    • Galvanized

    • Starter Included

    • Zinc Guard & Metal Fan Blade

    • Baldor Motor

    Learn More
  2. Ace Roto Mold 1,450 Gallon Cistern Tank AST-1450-1W

    Ace Roto Mold 1,450 Gallon Cistern Tank AST-1450-1W

    $1,226.97

    Ace Roto-Mold cistern tanks are intended for bulk storage or collection of potable water and designed for below ground level installations. Tanks are manufactured from high-density polyethylene with U.V. inhibitors and feature a trapezoidal, deep rib design. Only Ace tanks feature a custom-molded gasket in the lid. Manufactured from extruded Nitrile rubber, the gasket snaps into the lid and ensures a watertight seal. Our exclusive lid design locks in place with nylon ties, eliminating the need for metal fasteners that can corrode and fail. Ace Roto-Mold cistern tanks are FDA-approved for potable water and are manufactured for containment of liquids up to 1.7 specific gravity.

    • Capacity - 1,450 Gallon
    • Weight - 473 Pounds
    • Dimensions - 58 x 118 x 72
  3. Ace Roto Mold 1,150 Gallon Cistern Tank AST-1150-1W

    Ace Roto Mold 1,150 Gallon Cistern Tank AST-1150-1W

    $1,080.97

    Ace Roto-Mold cistern tanks are intended for bulk storage or collection of potable water and designed for below ground level installations. Tanks are manufactured from high-density polyethylene with U.V. inhibitors and feature a trapezoidal, deep rib design. Only Ace tanks feature a custom-molded gasket in the lid. Manufactured from extruded Nitrile rubber, the gasket snaps into the lid and ensures a watertight seal. Our exclusive lid design locks in place with nylon ties, eliminating the need for metal fasteners that can corrode and fail. Ace Roto-Mold cistern tanks are FDA-approved for potable water and are manufactured for containment of liquids up to 1.7 specific gravity.

    • Capacity - 1,150 Gallon
    • Weight - 414 Pounds
    • Dimensions - 60 x 101 x 60
  4. K&M Manufacturing Early John Deere 30 Series Air Seat For Mechanical Suspension 6711

    K&M Manufacturing Early John Deere 30 Series Air Seat For Mechanical Suspension 6711

    $1,029.97

    Product Features

    Complete seat and suspension kit for John Deere Early 30 series Row Crop tractors with Sound-Guard cab.

    The KM 401 Uni Pro is a deluxe seat and air suspension assembly that replaces the original deluxe mechanical suspension seat and provides a smoother, more comfortable ride. The air suspension has a self-contained 12-volt compressor which wires directly to the tractor's electrical system.

    • Durable brown fabric covering
    • Plush and spacious cushions for operator comfort
    • Adjustable backrest adds comfort and versatility: reclines or folds flat
    • Adjustable fold-up armrests with armrest height adjustment
    • Fore/aft isolator absorbs jarring for extra comfort
    • Adjustable slide rails provide 6" fore/aft adjustment
    • 5" suspension travel
    • Weight indicator with adjustment of 100-286 lbs
    • 20 degree swivel adjustment
    • Durable suspension cover to keep components free of dirt and dust

    Fits:

    John Deere models: 3030, 3130, 4030, 4230, 4430, 4630 with Original Deluxe Mechanical Suspension (7" seat well cavity)

    Learn More
  5. Ace Roto Mold 1,500 Gallon Vertical Dome Top Tank VT1500-64

    Ace Roto Mold 1,500 Gallon Vertical Dome Top Tank VT1500-64

    $1,095.97

    Vertical – Dome Top tanks are free standing with a flat bottom for indoor or outdoor installations. Ace Roto-Mold Vertical Tanks conform to the requirements of NSF/ANSI Standard 61. Tanks are manufactured from medium- or high-density polyethylene with U.V. inhibitors. Tank walls are translucent for level viewing and equipped with gallon indicators.

    • Capacity - 1,500 Gallons
    • Weight - 335 Pounds
    • Dimensions - 64 x 115
    • Lid - 16"
    • Fitting -2"
    • Specific Gravity - 1.7
    • Learn More
  6. Ace Roto Mold 2,200 Gallon Open Top Containment Tank  OP2200-90

    Ace Roto Mold 2,200 Gallon Open Top Containment Tank OP2200-90

    $1,216.97

    Open Top Tanks are selected for collection systems, temporary liquid storage, or as secondary containment for vertical tanks in indoor or outdoor installations. Tanks are manufactured from medium or high-density polyethylene with U.V. inhibitors. Tank walls are translucent for level viewing and equipped with gallon indicators.

    • Capacity - 2,200 Gallons
    • Weight - 365 Pounds
    • Dimensions - 90 x 85
    • Specific Gravity - 1.7
    Learn More
  7. Ace Roto MOld 1,250 Gallon Elliptical Tank HE1250-78

    Ace Roto MOld 1,250 Gallon Elliptical Tank HE1250-78

    $1,362.97

    Elliptical Tanks can be selected for stationary or transportable (non DOT approved) applications both indoors and outdoors. The elliptical tank lowers the center of gravity to enhance stability and visibility. The tanks feature a standard 2-1/2” collection sump on the bottom for full drain out. An 8-1/2” deep sump option is available on five sizes. Sump is located directly under the lid on standard tanks, but a center sump option is available on tanks from 500-1250 gallons. These tanks require the bottom to be fully supported with a cradle for use. The tanks are manufactured from medium-density polyethylene with U.V. stabilizers and are designed for containment of liquids of up to 1.7 specific gravity. Tank walls are translucent for level viewing and equipped with gallon indicators.

    • Capacity - 1,250 Gallons
    • Weight - 400 Pounds
    • Dimensions - 78x92x60
    • Lid - 16"
    • Fitting - 1 1/4" & 2"
    Learn More
  8. Ace Roto Mold 1,700 Gallon Open Top Containment Tank OP1700-90

    Ace Roto Mold 1,700 Gallon Open Top Containment Tank OP1700-90

    $1,023.97

    Open Top Tanks are selected for collection systems, temporary liquid storage, or as secondary containment for vertical tanks in indoor or outdoor installations. Tanks are manufactured from medium or high-density polyethylene with U.V. inhibitors. Tank walls are translucent for level viewing and equipped with gallon indicators.

    • Capacity - 1,700 Gallons
    • Weight - 240 Pounds
    • Dimensions - 86 x 68
    • Specific Gravity - 1.7
    Learn More
  9. Ace Roto Mold 1,000 Gallon Single Compartment Septic Tank AST-1000-1

    Ace Roto Mold 1,000 Gallon Single Compartment Septic Tank AST-1000-1

    $1,045.97

    aAce Roto-Mold septic tanks are stronger, easier to install, and less costly than old-fashioned concrete septic tanks- yet they still offer the quality construction and safety you expect. Manufactured from high-density polyethylene with U.V. inhibitors, Ace Roto-Mold tanks utilize a horizontal flow designed for below ground installations up to 36 inches. The 1000, 1250 and 1500 gallon double-compartment septic tanks have been tested by NSF to meet the IAPMO Z1000 and CAN/CSA-B-66 standards.

    Each tank carries an individual serial code and is fully document from date of manufacture. Ace Roto-Mold septic tanks are designed and manufactured with rigorous quality controls. The trapezoidal deep-rib design and interior baffle system make Ace Tanks the industry choice. <.p>

    Only Ace tanks feature a custom-molded gasket in the lid. Manufactured from extruded Nitrile rubber, the gasket snaps into the lid and ensures a watertight seal. Our exclusive lid design locks in place with nylon ties, eliminating the need for metal fasteners that can corrode and fail. Ace’s unique tank baffle system slows the flow of wastewater and directs it to the middle of the tank so wastewater can separate from solids. An outlet baffles allows the partially treated liquids to flow out for further treatment. Advantages of Ace’s baffle design include added strength, versatility, and ease of installation. Septic tanks are available in one-compartment and two-compartment designs and are manufactured for containment of liquids up to 1.7 specific gravity.

    • Capacity - 1,000 Gallon - Single Compartment
    • Weight - 390 Pounds
    • Dimensions - 60 x 101 x 60
  10. Tuthill/Fill-Rite 115V AC Arctic Pump Kit  FR310VARC

    Tuthill/Fill-Rite 115V AC Arctic Pump Kit FR310VARC

    $1,177.97

    Ready for the coldest temperatures, the FR310VARC boasts a powerful 300 Series high-flow AC Rotary Vane Pump with a 35 GPM (132 LPM) flow rate few competitors can match. It features an explosion-proof, UL listed dual-voltage 3/4 HP motor (115 and 230 VAC) for long life and dependability. The motor has sealed bearings, heavy-duty switch and thermal overload protection. It is designed with a built-in junction box, cast iron pump housing with iron rotor and carbon vanes

    Features & Benefits
    • Accessories Rated to -40°F (-40°C)
    • 35 GPM (132 LPM)
    • Diesel, Gasoline, Kerosene, E15, Biodiesel up to B20
    • 3/4 HP, UL/cUL Motor
    • 2-Year Warranty
    • Heavy Duty Cast Iron Construction
    • 2 in. Threaded Bung Mount
    • Iron Rotor with Carbon Rotary Vanes
    • Self Priming
    • Built in Strainer
    • Check Valve, Pressure Relief
    • 1 in. x 20 ft. Arctic Hose with Static Wire
    • 1 in. Arctic Automatic Nozzle
    • 1 in. Arctic Swivel
    Learn More

Items 1-10 of 53

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Grid List

Set Ascending Direction