Tractor Parts & Accessories
Heavier, more dependable return-chain guides. Specially-engineered and field proven to eliminate mechanical headaches common with return guides on other brand elevators - prevents sagging, catching, twisting and stretching - increases chain life.Conveyor-chain track has exclusive double-formed-bend design for extra rigidity. Prevents the sagging and bending common with other single-formed-bend tracks. Heavier, angle-iron connecting joints (1-1/4"x1-1/4") and hardened bolts prevent stretching - joints are quicker and easier to connect. Strongest structural design available. Bales should be "pulled toward" electric-motor drive end. However, if elevator is mounted on a transport, drive end must remain on the ground and "push bales".
*This unit does not come with the electric motor or pulley.Learn More
This 18", 3hp 1ph 230V aeration fan from Spread-All is completely factory assembled and test run before shipment to ensure quality. Fully galvanized, this fan will not rust, and will provide years of trouble free powerful air-flow.
- 18” Fan
Standard legs, stands, & carrying handles
Completely factory assembled and test run before shipment
Reversible application to pull air down through the grain, or to direct the air flow up through the grain by turning the fan around and reversing the guard
Either the intake or the discharge ends may be mounted to an air duct metal transition or a flat wall bin
Zinc Guards and Metal Fan Blade
115-volt AC Vane Pump for fuel with automatic leaded nozzle. Delivers up to 20 GPM (76). Pump and motor are U.L. Listed to U.S. and Canadian safety standards. 1 in. NPT outlet. Includes 1 in. x ¾ in. bushing and ¾ in. 12 ft (3.7 m) hose.
- External switch coverplate allows for easy access and keeps the UL rating intact
- Use with diesel fuel (up to 20% biodiesel blends such as B20), Gasoline (up to 15% alcohol blends such as E15), Kerosene
- MR 5-30 meter
- 12 ft. of hose
- Tank adapter
- Automatic nozzle
Specifications Model M-3120-AL/MR 5-30-G6N Design Type Vane Voltage 115 Volts AC Accuracy ±2% of reading Flowrate Up to 20 GPM, Up to 75 LPM Mechanical Connection 1 in. Inlet, 3/4 in. Outlet Fitting NPT Nozzle Automatic Reads Gallons Duty Cycle 30 minutes on / 30 minutes off Power Cord None Hose 12 ft. (3.7 m), 3/4 in. diameter Motor Protection Internal temperature-limiting device Current Draw 4.9 amps Suction Pipe Sold Separately Approvals U.L. Listed to U.S. and Canadian Standards
Cone Bottom Tanks are selected when a more complete drain out of stored chemical is required in indoor or outdoor installations. Tanks require stands to support the conical bottoms. Tanks are manufactured from medium- or high-density polyethylene with U.V. inhibitors. Tank walls are translucent for level viewing and equipped with gallon indicators.
- Capacity - 1,000 Gallons
- Weight - 250 Pounds
- Dimensions - 64 x 98
- Overall Height - 112″
- Lid - 16"
- Fitting -2"
- Specific Gravity - 1.7
- 60 gallon corrosion resistant poly tank
- 12V Diaphragm high Flo pump, 3.8 GPM;45 PSI
- Boomless Nozzles; 30' spray coverage
- Pressure Gauge- Adjustable pressure from 0-45 PSI
- Deluxe pistol grip handgun with adjustable nozzle
- Ready for Round up
Replace your Tractor Power with a Hydra Buddy Power Unit
- Free up your tractor for other uses
- Save money on fuel costs
- Save maintenance costs and running hours on your tractor
- Use to run grain augers, conveyors, dump wagons, position farm implements for maintenance and repair
- Engine: 5.0 HP Honda GC Series Engine
- Control Valve: Energy 3-way forward lock
- System Output: 11 GPM @ 900 PSI
- Hydraulic Tank: 5.6 Gallon Capacity
- Hydraulic Oil: Tractor Hydraulic Oil (SAE 10W) or Dextron III, (non-foaming)
- Hydraulic Filter: Spin-on type 25 Micron
- Hydraulic Couplers: 1-(1/2" Male) & 1-(1/2" Female), both quick disconnect type
- Shipping Weight: 165 lbs
- Dimensions: 30"L x 17.5"W x 25.75"H
This rugged, positive displacement, heavy pump is UL listed. Explosion proof UL listed 1/3 HP motor (115 VAC-60Hz) with sealed bearings, Heavy Duty switch, thermal overload protection and junction box. Carbon vanes and ceramic/carbon seal reduce wear and repair expense. Integral check valve with pressure relief on outlet side reduces pressure drop and improves vertical lift. Easy removable strainer, automatic bypass valve, 2" threaded bung for tank openings. Highest performing with a flow rate of 19 GPM at the nozzle.
Features & Benefits
- Up to 23 GPM open flow / 19 GPM at end of nozzle
- 1/3 HP Motor
- UL/cUL Listed Pump and Motor
- Heavy Duty Cast Iron Construction
- Diesel/Gasoline/Kerosene/E15/BD up to BD20
- 2 year warranty
- 2" Threaded base for tank mounting
- Iron Rotor with Carbon Rotary Vanes
- Self Priming
- Check Valve, Pressure Relief Valve, and strainer included
- 1" x 18' UL Listed Hose
- 901 Mechanical Meter
- Ultra High Flow Nozzle
- 28' Boom
- 17 No Drip Fan Nozzles
- 3 Section Control
- Quick Change Nozzle Body
- Folding Wet Boom Design
Elliptical Tanks can be selected for stationary or transportable (non DOT approved) applications both indoors and outdoors. The elliptical tank lowers the center of gravity to enhance stability and visibility. The tanks feature a standard 2-1/2” collection sump on the bottom for full drain out. An 8-1/2” deep sump option is available on five sizes. Sump is located directly under the lid on standard tanks, but a center sump option is available on tanks from 500-1250 gallons. These tanks require the bottom to be fully supported with a cradle for use. The tanks are manufactured from medium-density polyethylene with U.V. stabilizers and are designed for containment of liquids of up to 1.7 specific gravity. Tank walls are translucent for level viewing and equipped with gallon indicators
- Captivity -750 Gallons
- Weight - 220 Pounds
- Dimensions - 69 x 89 x 42
- Lid - 16"
- Fitting - 1 1/4" & 2"
Crop Care Tanks are designed for OEM sprayer applications that contain chemicals rated for contact with polyethylene. Hoop recesses are provided around the tank to facilitate installation and anchoring. Wide bottom tanks are available with either a box-style or sloped-style sump on the bottom for withdrawal. Narrow bottom tanks are cut out on each side to facilitate narrow track widths and are only available with a sloped-style sump. Larger tanks are furnished with polyethylene baffles for fluid control and a five-gallon rinse tank. The tanks are manufactured from high-density polyethylene with U.V. stabilizers and are designed for liquids of up to 1.9 specific gravity. Tanks are shipped on returnable pallets. Fittings are shipped loose.
Capacity - 750 Gallons
Weight - 262 Pounds
Dimensions - 48 x 90 x 50
Lid - 16"
Fitting - 2"