Tractor Parts & Accessories
- 2 functions: Flashing & Steady
- Super brightness LED up to 1.25 mile
- Use four “AA” size batteries at least 24 hours
- Strong magnetic design and road stand design
- Weather resistance
Harvest King Type F Automatic Transmission Fluid meets the requirements for and is qualified against Ford Specification M2C 33-F. Manufactured from selected high quality base stocks and premium additives to give maximum protection and performance.
- Protects against wear, rust, foam, and leaks
- Extends the life of your equipment
Tough universal steel tool box that can fit most tractors. Mounting brackets are optional to mount to tractor or implement. Easily removes from brackets if needed. Available in black only. Box size is 23" wide X 10" deep X 7" high. Bracket mounting pattern from 4" to 14" apart.Learn More
High-back utility seat. Replacement yellow vinyl seat. 19" high-back seat will replace both 16" and 19" original seats. Vinyl-covered polyurethane is waterproof. Drain hole to prevent water build-up.
Fits JD Gators 4 X 2 S/N 19951 & up; 6 X 4 S/N 20789 & up; Diesel S/N 2298 & up. Additional bracket required to adapt to earlier S/N's. Also fits these model Gators: Trail, Worksite, Turf, E-Gator Utility, CS, CX, 4 X 2 HPX, 4 X 4 HPX, 4 X 4 Trail HPX, TX, TX Turf, TH 6 X 4, TE, XUV,GT225, GT235, GT245, GX255, GX325, GX335, GX345, GX355, L100, L105, L107, L110, L118, L120, L130, L135, L145, 335, 355D, LX255, LX266, LX277, LX279, LX280, LX288, LX289, LX188, compact tractor 2210, 655, 755, 756, 855, 856, 955, 4200, 4500, 4210, 4310, 4410, 4510, 4610, 4710, 4300, 4400, 4600, 4700 (JD OEM Part # LVA10029).
John Deere Compact Tractor 2210 requires our Adapter Brackets (SKU 90960560 Part # 6003)Learn More
Use this oil transfer pumps one horse-powered motor to measure oil (up to 90 weight), waste oil, hydraulic fluid, antifreeze and non-flammable oil-based solvents. The motor is a UL recognized component and CSA approved.
- One horsepower motor provides power and performace year after year
Specifications Model L 5132 Design Type Gerotor Gear Voltage 115/230 Volts AC Mechanical Connection 1 in. Inlet, 3/4 in. Outlet Flowrate Up to 8 GPM, Up to 32 qpm, Up to 30 LPM Operating Temperature Max 140°F (60°C) Duty Cycle 30 minutes on / 30 minutes off Hose 8 ft (2.5 m), 3/4 in. diameter Nozzle Ball Valve Type Power Cord 35 in. Three-prong Grounded Plug Motor Protection Thermally Protected Suction Pipe Two-piece Wetted Materials Aluminum Housing To Use With Oil (up to 90 weight), waste oil, hydraulic fluid, antifreeze and non-flammable oil-based solvents Approvals U.L. and CSA Listed Motor
Designed for today's demanding applications, these one piece, grade 5 performance, forged hitch pins are made from high strength steel and heat treated. Pin has black power coating with a red vinyl coated head and handle. Zinc plated "R" clip pin included.Learn More
The KM 125 Uni Pro Exact Seat Cover fits the KM 125 Uni Pro and KM JD Gator seat. Also fits the Milsco XB180 seat. Made with durable Endura fabric. One-piece custom fit cover made for a perfect fit. Cover is water-resistant and equipped with a grommet drain hole. It has a flexible design which makes for easy installation. Machine washable. Comes individually packaged with installation instructions.Learn More
12-volt DC Economy Version Aluminum Gear Pump for fuel with manual unleaded nozzle. Up to 15 GPM 57 LPM). UL Listed Motor. CSA Certified. Overload Protected Motor. Includes 18 ft. power cord, 3/4 in. x 10 ft. (3.05 m) hose, and two-piece suction pipe.
- Model: M-150S-EM
- Voltage & Type: 12-Volt DC - Gear Explosion Proof Motor
- Flow Rate: Up To 15 GPM (57 LPM)
- Nozzle: Manual
- Inlet: 1 In.
- Outlet: 3.4 In.
- Bypass Pressure: 15 psig 1 bar
- Operating Temperature: -20° to 125° F (-29° to 52° C)
- Duty Cycle: 30 minutes on / 30 minutes off
- Power Cord: 18 ft (5.5m) x 12/2 AWG
- Hose Length: 12 ft
- Hose Diameter: 3/4 Inch
- Motor Protection: Circuit breaker for long life
- Current Draw: 18 amps
- Suction Lift: Up to 5.5 ft. (1.7 m)
- Suction Pipe: Two-piece, Trim-to-fit
- Use with: Diesel fuel (up to 20% biodiesel blends such as B20), Gasoline (up to 15% alcohol blends such as E15), Kerosene
- Standard: CSA Certified Flammable Liquid Dispenser U.L. Listed Motor
- Unique Feature: Economy model with direct tank mounting
- Warranty: 2 Years
Fits Thermo King Tripac APU.
- Horizontal–Round Body. Shell dia. 4-1/4"
- Replaces OEM 1E36764H01
- Inlet Length (A): 3-1/2"
- Inlet I.D. (B): 1-1/2"
- Shell Length (C): 12"
- Outlet Length (D): 2-5/8"
- Outlet O.D. (E): 1-1/2"
- O/A Length (F): 15
- Weight in LBS: 3
Heavier, more dependable return-chain guides. Specially-engineered and field proven to eliminate mechanical headaches common with return guides on other brand elevators - prevents sagging, catching, twisting and stretching - increases chain life.Conveyor-chain track has exclusive double-formed-bend design for extra rigidity. Prevents the sagging and bending common with other single-formed-bend tracks. Heavier, angle-iron connecting joints (1-1/4"x1-1/4") and hardened bolts prevent stretching - joints are quicker and easier to connect. Strongest structural design available. Bales should be "pulled toward" electric-motor drive end. However, if elevator is mounted on a transport, drive end must remain on the ground and "push bales".
*This unit does not come with the electric motor or pulley.Learn More