Tractor Parts & Accessories
DPK-6900C - Cast Iron
Type: 6-Roller design
Max Pressure: 300 PSI (21 bar)
Max Recommended Temperature: 140°F (60° C)
Port Size: ¾” NPT (female)
6900: Side Ports
6601: Rear Ports - Non Field Serviceable
Base Mounted: 5⁄16 -18 UNC-2B (2 holes)
PTO: Use torque arm and coupler
Size: 5⁄8” solid shaft
Rotation: CCW (standard);
(Shaft rotation is determined when
looking at shaft end of pump)
Weight: 9 lbs (19.8 kg)
Materials of Construction
Housing: Cast Iron or Diamond Series™ Stainless Steel
Rollers: 3⁄4” Ultra rollers (standard)
6900 Series: 3⁄4” Ultra rollers (standard)
6601C: 11⁄16” Ultra Rollers (standard)
11⁄16” or 3⁄4” Polypropylene (optional)
Shaft Seals: Viton cartridge type lip seals
Seal Ring: Viton
Shaft & Rotor:
Cast Iron: Extra-fine finish 404 SST
Diamond Series™ Stainless Steel: Extra-fine finish 416 SST
Bearings: Permanently-lubricated, heavy-duty sealed bearingsLearn More
- Vinyl-Covered Polyurethane
- Integral Polyurethane/Steel Frame Construction
- Waterproof and Drain Hole
- Accepts 940 Bracket
Bolt Patterns (width x depth)
- 7.5" x 3"
- 7.5" x 7"
- 8" x 11.5"
- 8.2" x 5"
- 10.63" x 7.5"
- 11.25 x 11.5"
- Garden Tractors
- Commercial Turf/Mowers
- Utility Trucks
- Professional Turf
- Skid Steers
- Ground Service Equipment
The grain aerator unit consists of two parts. The head houses a 12" diameter fan with a 1/12 HP heavy duty motor. The second component, the tube, is 6 feet tall, with 36" being solid pipe and the other 36" being perforation pipe. The total weight for the unit is 30 pounds. The entire unit is inserted tube first into the grain bin to remove hot spots and knock out moisture.
- To harvest your grain earlier.
- To remove moisture from your grain
- To remove heat and moisture when grain is heating
- To eliminate top crusting and sweating
- To stop condensation
- To cool your grain down to 45 degrees during the winter months.
Out of stock