Tractor Parts & Accessories
- Ideal for Applying Insecticides & Herbicides
- Chemical Resistant Polyethylene Tank
- 12 Volt Connection Cables
- Adjustable Cone Spray Nozzle
- 18” Handgun with 10ft Coiled Hose
- Round-up® Ready"
- 1 GPM Everflo Pump
Inductor Tanks are selected as supply tanks for application systems and when a more complete drain out of stored liquids is required in indoor or outdoor applications. Tanks require stands to support the conical bottoms. Tanks are manufactured from medium-density polyethylene with U.V. inhibitors and designed for containment of liquids of up to 1.7 specific gravity. Tank walls are translucent for level viewing and equipped with gallon indicators.
- Capacity - 15 Gallons
- Weight - 10 Pounds
- Lid - 12"
- Fitting - 1 1/2" FPT BOSS
- Dimensions - 19 x 27
- 9 Gallon Capacity
- Trigger gun with adjustable nozzle
- 12 Volt demand 1 GPM Pump
- Coiled Hose
- Adjusts from fine mist to solid stream
- 5” vented lid with lanyard
- Includes Attachment Straps
**This model does not come with the brass fittings. If you are needing the SP0006-FUWB please contact our customer service depratment**
Typically used as a fuel tank on power equipment, these specialty tanks are rectangular tanks made for indoor or outdoor, stationary or transportable applications. Tanks are manufactured from high-density cross-linked polyethylene with U.V. stabilizers and are available in natural and black colors. Tanks are designed for the containment of all chemicals (including gasoline and diesel fuels) rated for contact with cross-linked polyethylene. Tanks must be securely anchored for use in transportable applications. The standard weight tank is designed for chemicals with a specific gravity of 1.75. It is provided with a collection sump on the bottom for fitting installation, but because of the variety of applications, no fittings are furnished. Please consult the factory regarding available fittings. (Photo shows 1/4″ brass fitting.)
- Capacity - 6 Gallon
- Weight - 5 Pounds
- Dimensions - 10 x 15 x 10
- Polypropylene pump housing and valve plate
- Viton Valves - Santoprene Diaphragm
- Zinc Plated Steel fasteners
- Polypropylene 3" Motor Shell
- Honeywell Micro Switch
- 70 PSI (4.8 Bar) Max
- 2.2 GPM (8.3 LPM) Max
- Round-Up Ready
- Self Priming to 8 Feet
- Max Fluid Temp 140 Deg F
- 12V DC
- 7.5 Max Amps
- 3/8" NPT Ports
- CE Approved
- 4.8 Lbs Dry
116000-1 CALIBRATION CONTAINER has a 5 gallon measurement to calibrate fluid meters. Has molded one-piece design for lightweight durability. Each container is individually calibrated at the factory for maximum accuracy.Learn More
- FKM (viton type) seals
- PTFE self-lubricating stem bushings and seats cannot stick or bind.
- Precision molded in polypropylene.
- Polypropylene is reinforced with fiberglass for additional strength.
- Self-aligning ball moves freely against the PTFE seats for smooth operation.
- Banjo Valve opens and closes with very little pressure on the handle.
- Ball is diamond turned, after molding, to make it spherically perfect, which provides precise contact between ball and seats.
- Inlet; 3/4" or 1" female pipe thread
- Hold-open handle clip for fast, effortless filling
- Small, trim and lightweight with a low profile aluminum body and a full hand insulator that protects the vehicle from scratches and nicks, and insulates hand when in use. U/L approved
- Designed for fuel applications requiring an auto shut-off
- For use with gasoline, 15% ethanol, methanol and gasoline blends
From Agriculture to Automotive and every industry in between, Delavan PowerMax Hydraulic Cylinders are designed and manufactured to meet the most demanding requirements. The PowerMax line was developed because we understand the need for professional performance and durability. All PowerMax Cylinders are hydraulically tested at twice their working pressure.
- Chromed, polished and individually heat-treated shaft provides extended cylinder life.
- Working pressure 2500 PSI and 3000 PSI.
- All cylinders are 100% hydraulically tested up to two times working pressure.
- Series PML – 2500 PSI (5,000 PSI proof pressure).
- Series PMH – 3000 PSI (6,000 PSI proof pressure).
Shaft Size: 1 1/4Learn More
Size of Pins: 1 inch
Retraction Length: 20 1/4
Simple and effective way to protect yourself from the sun. It mounts directly to the ROPS structure without drilling. Comes complete with umbrella frame, mounting bracket and cover.
- Fits tube sizes 2” x 2” up to 3” x 3” only
- 54" Square