Tanks - Accessories
Cone Bottom Tanks are selected when a more complete drain out of stored chemical is required in indoor or outdoor installations. Tanks require stands to support the conical bottoms. Tanks are manufactured from medium- or high-density polyethylene with U.V. inhibitors. Tank walls are translucent for level viewing and equipped with gallon indicators.
- Capacity - 2,500 Gallons
- Weight - 435 Pounds
- Dimensions - 90 x 111
- Overall Height - 122"
- Lid - 16"
- Fitting -2"
- Specific Gravity - 1.7
- Capacity - 1,065 Gallons
- Weight - 280 Pounds
- Dimensions - 61 x 78
Bulkhead fittings and syphon tubes are available for Ace Roto-Mold tanks in the following sizes. Standard fittings that come included with each tank are listed in each tank table. A syphon tube is included with the purchase of all Pick Up Tanks and all Vertical Tanks 300 gallons or greater. Fittings listed below are available as additions to tanks ordered with multiple fittings. Both fittings and syphon tubes are available as replacement parts.
- Description - 1 1/4" Ace BulkHead
- Hole Requirement - 2 1/4""
Open Top Tanks are selected for collection systems, temporary liquid storage, or as secondary containment for vertical tanks in indoor or outdoor installations. Tanks are manufactured from medium or high-density polyethylene with U.V. inhibitors. Tank walls are translucent for level viewing and equipped with gallon indicators.
- Capacity - 2,200 Gallons
- Weight - 365 Pounds
- Dimensions - 90 x 85
- Specific Gravity - 1.7
Lids for Ace Roto-Mold tanks are available in the following sizes. Standard lids that come included with each tank are listed in each tank table. The following lids are available as replacement parts.
- 5″ Spin-on Spring Vented Lid
aAce Roto-Mold septic tanks are stronger, easier to install, and less costly than old-fashioned concrete septic tanks- yet they still offer the quality construction and safety you expect. Manufactured from high-density polyethylene with U.V. inhibitors, Ace Roto-Mold tanks utilize a horizontal flow designed for below ground installations up to 36 inches. The 1000, 1250 and 1500 gallon double-compartment septic tanks have been tested by NSF to meet the IAPMO Z1000 and CAN/CSA-B-66 standards.
Each tank carries an individual serial code and is fully document from date of manufacture. Ace Roto-Mold septic tanks are designed and manufactured with rigorous quality controls. The trapezoidal deep-rib design and interior baffle system make Ace Tanks the industry choice.
Only Ace tanks feature a custom-molded gasket in the lid. Manufactured from extruded Nitrile rubber, the gasket snaps into the lid and ensures a watertight seal. Our exclusive lid design locks in place with nylon ties, eliminating the need for metal fasteners that can corrode and fail. Ace’s unique tank baffle system slows the flow of wastewater and directs it to the middle of the tank so wastewater can separate from solids. An outlet baffles allows the partially treated liquids to flow out for further treatment. Advantages of Ace’s baffle design include added strength, versatility, and ease of installation. Septic tanks are available in one-compartment and two-compartment designs and are manufactured for containment of liquids up to 1.7 specific gravity.
- Capacity - 1,000 Gallon - Double Compartment
- Weight - 436 Pounds
- Dimensions - 60 x 101 x 60
Vertical - Flat Top tanks feature additional flats for fitting installation or mounting. Tank are free standing with a flat bottom for indoor or outdoor installations. Ace Roto-Mold Vertical Tanks conform to the requirements of NSF/ANSI Standard 61. Tanks are manufactured from medium- or high-density polyethylene with U.V. inhibitors. Tank walls are translucent for level viewing and equipped with gallon indicators.
- Capacity - 500 Gallons
- Weight - 118 Pounds
- Lid - 8"
- Fitting - 2"
- Dimensions - 46 x 77
- Specific Gravity - 2.0
- Capacity - 150 Gallons - 45 Deg
- Weight - 63 Pounds
- Clearance - 12"
Specially formulated EnduraPlas low profile diesel grade polyethylene fuel transfer tank provides a hasslefree, completely assembled option for transporting diesel fuel. Features a built-in 10 GPM pump with on/off switch and integrated bypass valve. U.S.A.
- (1) 55-gal. low profile diesel fuel transfer tank with 10 GPM pump
- (1) 15ft. hose
- (1) Auto shutoff nozzle
- Strong, lockable poly lid protects the pump compartment and reduces fuel theft
- Durable, corrosion-resistant polyethylene construction
- Includes 15ft. of 3/4in. hose with an anti-kink spring and swivel to prevent tangles
- Easy-to-clean suction strainer and splash-resistant breather installed
- 3/4in. auto shutoff nozzle adds convenience
- Molded-in plastic handles for easy maneuvering and tank relocation
- Bottom drain plug on tank allows for complete drainage when desired
Features Tank Type Transport Mounting Type Strap, bolt Tank Size (gal.) 55 Shape Square Dimensions L x W x H (in.) 48 x 34 x 21 Outlet Diameter (in.) 3/4 Inlet Diameter (in.) 2 Finish Type Poly