McAfee SECURE sites help keep you safe from identity theft, credit card fraud, spyware, spam, viruses and online scams

ORDER BY PHONE:

1-800-561-1752

7AM - 5PM CST 7 Days a Week

SPECIAL SALES & COUPONS!

Subscribe to receive members-only deals in your email

FREE SHIPPING*

ORDERS $149+

View Details

Tanks - Accessories

Tanks - Accessories

Items 1-10 of 44

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Grid List

Set Ascending Direction
  1. Ace Roto Mold 1,700 Gallon Cistern Tank AST-1700-1W

    Ace Roto Mold 1,700 Gallon Cistern Tank AST-1700-1W

    $1,448.97

    Ace Roto-Mold cistern tanks are intended for bulk storage or collection of potable water and designed for below ground level installations. Tanks are manufactured from high-density polyethylene with U.V. inhibitors and feature a trapezoidal, deep rib design. Only Ace tanks feature a custom-molded gasket in the lid. Manufactured from extruded Nitrile rubber, the gasket snaps into the lid and ensures a watertight seal. Our exclusive lid design locks in place with nylon ties, eliminating the need for metal fasteners that can corrode and fail. Ace Roto-Mold cistern tanks are FDA-approved for potable water and are manufactured for containment of liquids up to 1.7 specific gravity.

    • Capacity - 1,700 Gallon
    • Weight - 576 Pounds
    • Dimensions - 58 x 137 x 72
  2. Ace Roto Mold 1,600 Gallon Elliptical Tank Deep Sump HED1600-78

    Ace Roto Mold 1,600 Gallon Elliptical Tank Deep Sump HED1600-78

    $1,440.97

    Elliptical Tanks can be selected for stationary or transportable (non DOT approved) applications both indoors and outdoors. The elliptical tank lowers the center of gravity to enhance stability and visibility. The tanks feature a standard 2-1/2” collection sump on the bottom for full drain out. An 8-1/2” deep sump option is available on five sizes. Sump is located directly under the lid on standard tanks, but a center sump option is available on tanks from 500-1250 gallons. These tanks require the bottom to be fully supported with a cradle for use. The tanks are manufactured from medium-density polyethylene with U.V. stabilizers and are designed for containment of liquids of up to 1.7 specific gravity. Tank walls are translucent for level viewing and equipped with gallon indicators.

    • Capacity - 1,600 Gallons
    • Weight - 439 Pounds
    • Dimensions - 78x92x60
    • Lid - 16"
    • Fitting - 2"
    Learn More
  3. Ace Roto Mold 1,150 Gallon Cistern Tank AST-1150-1W

    Ace Roto Mold 1,150 Gallon Cistern Tank AST-1150-1W

    $1,080.97

    Ace Roto-Mold cistern tanks are intended for bulk storage or collection of potable water and designed for below ground level installations. Tanks are manufactured from high-density polyethylene with U.V. inhibitors and feature a trapezoidal, deep rib design. Only Ace tanks feature a custom-molded gasket in the lid. Manufactured from extruded Nitrile rubber, the gasket snaps into the lid and ensures a watertight seal. Our exclusive lid design locks in place with nylon ties, eliminating the need for metal fasteners that can corrode and fail. Ace Roto-Mold cistern tanks are FDA-approved for potable water and are manufactured for containment of liquids up to 1.7 specific gravity.

    • Capacity - 1,150 Gallon
    • Weight - 414 Pounds
    • Dimensions - 60 x 101 x 60
  4. Ace Roto Mold 4,600 or 4,900 Gallon - 15 Degree Stand CB102-15ST

    Ace Roto Mold 4,600 or 4,900 Gallon - 15 Degree Stand CB102-15ST

    $1,225.97
    • Capacity - 4,600 or 4,900 Gallons - 15 Deg.
    • Weight - 640 Pounds
    • Clearance - 11"
    Learn More
  5. Ace Roto Mold 1,250 GAllon Elliptical Tank Deep Sump HED1250-78

    Ace Roto Mold 1,250 GAllon Elliptical Tank Deep Sump HED1250-78

    $1,362.97

    Elliptical Tanks can be selected for stationary or transportable (non DOT approved) applications both indoors and outdoors. The elliptical tank lowers the center of gravity to enhance stability and visibility. The tanks feature a standard 2-1/2” collection sump on the bottom for full drain out. An 8-1/2” deep sump option is available on five sizes. Sump is located directly under the lid on standard tanks, but a center sump option is available on tanks from 500-1250 gallons. These tanks require the bottom to be fully supported with a cradle for use. The tanks are manufactured from medium-density polyethylene with U.V. stabilizers and are designed for containment of liquids of up to 1.7 specific gravity. Tank walls are translucent for level viewing and equipped with gallon indicators.

    • Capacity - 1,250 Gallons
    • Weight - 400 Pounds
    • Dimensions - 78x92x60
    • Lid - 16"
    • Fitting - 1 1/4" & 2"
    Learn More
  6. Ace Roto Mold 1,250 Gallon Double Compartment Septic Tank AST-1250-2

    Ace Roto Mold 1,250 Gallon Double Compartment Septic Tank AST-1250-2

    $1,368.97

    aAce Roto-Mold septic tanks are stronger, easier to install, and less costly than old-fashioned concrete septic tanks- yet they still offer the quality construction and safety you expect. Manufactured from high-density polyethylene with U.V. inhibitors, Ace Roto-Mold tanks utilize a horizontal flow designed for below ground installations up to 36 inches. The 1000, 1250 and 1500 gallon double-compartment septic tanks have been tested by NSF to meet the IAPMO Z1000 and CAN/CSA-B-66 standards.

    Each tank carries an individual serial code and is fully document from date of manufacture. Ace Roto-Mold septic tanks are designed and manufactured with rigorous quality controls. The trapezoidal deep-rib design and interior baffle system make Ace Tanks the industry choice.

    Only Ace tanks feature a custom-molded gasket in the lid. Manufactured from extruded Nitrile rubber, the gasket snaps into the lid and ensures a watertight seal. Our exclusive lid design locks in place with nylon ties, eliminating the need for metal fasteners that can corrode and fail. Ace’s unique tank baffle system slows the flow of wastewater and directs it to the middle of the tank so wastewater can separate from solids. An outlet baffles allows the partially treated liquids to flow out for further treatment. Advantages of Ace’s baffle design include added strength, versatility, and ease of installation. Septic tanks are available in one-compartment and two-compartment designs and are manufactured for containment of liquids up to 1.7 specific gravity.

    • Capacity - 1,250 Gallon - Double Compartment
    • Weight - 489 Pounds
    • Dimensions - 58 x 118 x 72
    Learn More
  7. Ace Roto Mold 2,600 Gallon - 45 Deg. Stand CB086-45ST

    Ace Roto Mold 2,600 Gallon - 45 Deg. Stand CB086-45ST

    $1,125.97
    • Capacity - 2,600 Gallons - 45 Deg.
    • Weight - 580 Pounds
    • Clearance - 12"
    Learn More
  8. Ace Roto Mold 2,600 Gallon Skid FS2600-SK

    Ace Roto Mold 2,600 Gallon Skid FS2600-SK

    $1,184.97
    • Capacity -2,600 Gallons
    • Weight - 900 Pounds
    • Dimensions - 64 x 201
    Learn More
  9. Ace Roto Mold 1,000 Gallon Double Compartment Septic Tank AST-1000-2

    Ace Roto Mold 1,000 Gallon Double Compartment Septic Tank AST-1000-2

    $1,207.97

    aAce Roto-Mold septic tanks are stronger, easier to install, and less costly than old-fashioned concrete septic tanks- yet they still offer the quality construction and safety you expect. Manufactured from high-density polyethylene with U.V. inhibitors, Ace Roto-Mold tanks utilize a horizontal flow designed for below ground installations up to 36 inches. The 1000, 1250 and 1500 gallon double-compartment septic tanks have been tested by NSF to meet the IAPMO Z1000 and CAN/CSA-B-66 standards.

    Each tank carries an individual serial code and is fully document from date of manufacture. Ace Roto-Mold septic tanks are designed and manufactured with rigorous quality controls. The trapezoidal deep-rib design and interior baffle system make Ace Tanks the industry choice.

    Only Ace tanks feature a custom-molded gasket in the lid. Manufactured from extruded Nitrile rubber, the gasket snaps into the lid and ensures a watertight seal. Our exclusive lid design locks in place with nylon ties, eliminating the need for metal fasteners that can corrode and fail. Ace’s unique tank baffle system slows the flow of wastewater and directs it to the middle of the tank so wastewater can separate from solids. An outlet baffles allows the partially treated liquids to flow out for further treatment. Advantages of Ace’s baffle design include added strength, versatility, and ease of installation. Septic tanks are available in one-compartment and two-compartment designs and are manufactured for containment of liquids up to 1.7 specific gravity.

    • Capacity - 1,000 Gallon - Double Compartment
    • Weight - 436 Pounds
    • Dimensions - 60 x 101 x 60
    Learn More
  10. Ace Roto Mold 2,450 Gallon - 15 Deg. Cone Bottom, Flat Top CB2450-90

    Ace Roto Mold 2,450 Gallon - 15 Deg. Cone Bottom, Flat Top CB2450-90

    $1,253.97

    Cone Bottom Tanks are selected when a more complete drain out of stored chemical is required in indoor or outdoor installations. Tanks require stands to support the conical bottoms. Tanks are manufactured from medium- or high-density polyethylene with U.V. inhibitors. Tank walls are translucent for level viewing and equipped with gallon indicators.

    • Capacity - 2,450 Gallons
    • Weight - 437 Pounds
    • Dimensions - 90 x 114
    • Overall Height - 125"
    • Lid - 16"
    • Fitting -2"
    • Specific Gravity - 1.7
    Learn More

Items 1-10 of 44

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Grid List

Set Ascending Direction