Even with its 5-bushel capacity, ATVs or garden tractors can easily tow this spreader. A broadcast, tow-behind spreader, this heavy-duty garden tool means business with an all steel gear drive complete with grease fittings. This spreader is designed to cut down greatly on the number of passes necessary to fully cover your lawn, game plot or garden with a distribution up to 20 ft. wide. This spreader will haul approximately 300 lbs. of material and will cover approximately 65,000 square feet of area. The wide distribution pattern reduces over-fertilizing or under-fertilizing. The hopper is solid steel for a rugged long life. Wheel driven, the spreader requires no outside power and features pneumatic tires. Available in black only.Learn More
Fits Following Models:
- Front of Gator HPX & XUV
- Rear of T-Series with 4 Bolt Pattern of 1 3/4" x 3 3/8"
- Will work on the front or the rear of your Gator. (Note: When your ball receiver is installed on the rear your Traditional 4x2 or 6x4, the tailgate may hit during dumping. We also have a longer extended version that will enable you to keep the ball receiver installed during dumping.)
- Only Works on the Front of all Gator HPX
- Only Works on the Front of the following Gator XUV's
- 2007-2010 XUV 620i and 850D
- Only Works on the Rear of some of the Traditional Series (T-Series) with a 4-bolt pattern of approximatly 1-3/4" x 3-3/8"
- 100% MADE IN USA
- Constructed of 3/16" Grade 50 steel
- Unlike all other hitch competitors our hitches are metal bead blasted before they are powder coated for the best possible finish prep.
- Powder coated black for supreme durability
- Very easy to install
- All mounting hardware included
- Complete installation instructions included
- Satisfaction guaranteed
Rocker Switch Fits Only T1500 and T2000 winchesLearn More
- The wrap-around design fits most ATV front and rear racks and holds lots of gear
- . Secure to ATV racks with 6 pair of durable straps and ladder lock buckles.
- Constructed of rugged 600-denier polyester water-resistant pack material.
- Equipped with storm flaps and deluxe zipper pulls.
- Measures 34" x 16" x 9".
- Rated Line Pull: 4,500 LB Single Line
- Motor: 12V DC 1.9HP Motor
- Remote Control: Handlebar Mini-Rocker
- Wireless Remote Control: Included
- Gear Train: 3 Stage Planetary
- Gear Ratio: 185:1
- Clutch (Free Spooling): Split Ring Gear
- Brake: Dynamic and Mechanical Braking
- Drum Diameter: 2.3 Inches
- Length: 4.4"
- Wire Rope: 1/4" x 43'
- Fair Lead: Roller
- Mounting Bolt Pattern: 3.0" x 6.59"
- Winch Dimensions: 16.5" L x 6.5"H x 5.1"W
- Most popular and versatile Gun Boot® case for over 10 years!
- The Kolpin Gun Boot® IV case has traveled around the world and back and is an industry standard in hard cases.
- Ergonomically designed handle and molded attachment points for a sling
- Designed to accommodate left and right hand bolt action rifles and shotguns
- Utilizes all existing Gun Boot® IV brackets (sold separately)
- Compatible with the Utility Gear Rail System
- Made in the USA
- Includes a removable, shock absorbing foam and nylon Impact™ liner
- Provides ample room for 50mm scopes and even rifles with slings attached
- Manually Raise and Lower any ATV Plow System Easily from the Driver's Seat
- Attaches to front rack with the included EZ Mount system
- Ratcheting handle allows user to lock blade in any of four positions
- Operates with minimal lifting effort
- Works with most ATV plow systems
The ATV TEK Trio 1.25” hitch’s patent pending “C” channel design guarantees maximum strength as well as giving a 3” rise for optimal towing height. The Trio Hitch features a welded-on 2” ball, reinforced tow loop/tie-down point and a clevis-pin hole. The included Quiet Tek wedge installs between the hitch and the receiver to minimize hitch rattle.
- Hitch pin included.
- Fits all 1.25” receivers.
SnowBear® Plows Inc. is the leading North American manufacturer of personal and light commercial snow plows and related accessories. The SnowBear® UTV plow fits any UTV or side by side that has a 2” front receiver hitch. It is great for getting into tight spots that a traditional plow attached to a truck or SUV can’t. With the SnowBear® UTV plow you will be able to remove snow 50 times faster than with a snow thrower. In cab toggle switch makes raising and lowering your plow easy.
- Measures 72” x 19”
- Made in North America with heavy duty steel construction
- Will fit UTV’s and side by sides with a 2” front hitch
- Will fit most UTV's but may require a drop extension
- Easy attachment and removal system for your plow
- Comes with a custom geared electric winch with heavy duty strap
- Includes wired in cab toggle switch
- Included skid shoes make plowing over soft surfaces, gravel and uneven terrain easy
- 5 position angling to allow you to push snow where ever you need it to go
- Plow stands allow for easy storage of the plow
- Finished in a premium black powder coat
- Part #: 324-110
- 72” wide
- 19” in height
- 230 lbs
- Premium black powder coat
Warranty: One year limited manufacturer warrantyLearn More