McAfee SECURE sites help keep you safe from identity theft, credit card fraud, spyware, spam, viruses and online scams

ORDER BY PHONE:

1-800-561-1752

7AM - 5PM CST 7 Days a Week

SPECIAL SALES & COUPONS!

Subscribe to receive members-only deals in your email

FREE SHIPPING*

ON ORDER $99+

View Details

ATV/UTV

ATV/UTV

Items 1-10 of 21

per page
Page:
  1. 1
  2. 2
  3. 3

Grid List

Set Ascending Direction
  1. Superwinch Terra 45 Synthetic Rope 12 Volt 4500lb Winch 1145230

    Superwinch Terra 45 Synthetic Rope 12 Volt 4500lb Winch 1145230

    $289.99

    The heavy duty permanent magnet motor includes larger diameter wire within the winding (nearly twice as thick as the competition) and sealed bearings at both ends of the motor (the competition only uses one bearing and a cheap bushing on the opposite end). The highest horsepower/torque and lowest amperage draw in the industry, pulls more weight longer and faster in deep mud and water, and puts the least amount of drain on the battery.

    Superwinch synthetic ropes are genuine AmSteel-Blue™ with Samthane™, a special coating to help resist abrasion. The raw material in AmSteel-Blue™ is made from genuine Dyneema® SK-75 HMPE fiber, "which is the worlds strongest fiber™" made by Sampson Rope Technologies.

    AmSteel®-Blue is a torque-free 12-strand single braid that yields the maximum in strength-to-weight ratio and, size for size, is the same strength as steel—yet it floats. AmSteel®-Blue outlasts wire 3:1, making it an excellent wire rope replacement. It has extremely low stretch and superior flex fatigue and wear resistance. Average strength is 8,600 lbs. and minimum strength is 7,700 lbs. Elastic elongation is only 0.96% at 30% of the break strength.

    You will need a winch mount plate kit to install this winch on your ATV, UTV or Side-by-Side.

    Product Features

    • Rated Line Pull: 4,500 lbs (2,041 kgs)
    • Motor: Sealed 1.6 HP Permanent Magnet
    • Gearing: 3-Stage Planetary
    • Gear Ratio: 191:1
    • Solenoid: Sealed Solenoid with Circuit Breaker
    • Clutch: Free-Spooling, Ergonomic Control
    • Brake: Automatic 100% Load HoldingRope: Synthetic 1/4" x 50' (6.5mm x 15.2m)
    • Hook: Heavy-Duty Clevis Pinned Latch
    • Fairlead: Blue Anodized Aluminum Hawse
    • Remote: 10' Sealed Hand-Held
    • Dimensions: 15.1" L x 4.5" D x 4.8" (384mm L x 114mm D x 122mm H)
    • Drum Diameter: 2.0" (50.2mm)
    • Drum Length 4.9" (124.5mm)
    • Mounting Bolt Pattern: 3.0" x 6.66" (76mm x 169mm)
    • Installed Weight: 19.0 lbs (8.6 kgs)
    • Shipping Weight: 27.9 lbs (12.65 kg)
    • Warranty: Limited Lifetime Warranty
    • Line Pull at 0 lbs: 21 Amps Motor Draw / 15.0 FPM (4.6 MPM) Line Speed
    • Line Pull at 4,500 lbs: 178 Amps Motor Draw / 5.5 FPM (1.7 MPM) Line Speed
    Learn More
  2. Kolpin Polaris Ranger 2005-08 / 2009 Specific Half-Folding Windshield  2610

    Kolpin Polaris Ranger 2005-08 / 2009 Specific Half-Folding Windshield 2610

    $274.97

    Product Features

    • Convenient half-folding design
    • 1/4” abrasive-resistant GE Lexan MR10
    • Injection-molded clamps and hinges
    • Black coated finish hardware
    • Easy to install
    • Lip on upper shield deflects air over operator and passenger

    Application Chart:

    2005
    o Ranger 4x4, 6x6
    o Ranger XP

    2006
    o Ranger 500 4x4, 4x4 EFI
    o Ranger 700 4x4 XP
    o Ranger 700 6x6 EFI

    2007
    o Ranger 500 4x4, 4x4 EFI
    o Ranger 700 4x4 EFI/LE
    o Ranger 700 6x6 EFI

    2008
    o Ranger 500 4x4 EFI
    o Ranger 700 4x4 EFI, XP
    o Ranger 700 6x6 EFI
    o Ranger 700 4x4 EFI CREW

    2009
    o Ranger 500 4x4 EFI
    o Ranger 700 6x6 EFI
    o Ranger 700 4x4 EFI CREW

    Learn More
  3. Kolpin ATV Rear Lounge With Cooler  4421

    Kolpin ATV Rear Lounge With Cooler 4421

    $269.97

    Product Description

    ATV REAR LOUNGER WITH COOLER  4421

    • Heavy duty, Rotomolded, and uv-stabilized LLDPE (linear low-density polyethylene) construction
    • Perfect for transporting gear and other items
    • Relax comfortably on the trail with integrated backrest, armrests and seat cushion
    • Convenient arm storage compartments
    • Mounts to most tubular or composite racks using four U-bolts and sealing washers
    • Center cooler has removable drain plug
    • 2.5 cubic feet of weather resistant storage in arms
    • Cooler Dimension: 13” l x 4” w x 6.5” h
    • Dimensions: 39.75” l x 27.88” w x 17” h
    Learn More
  4. KFI Products 4500lbs UTV Winch Kit  U4500

    KFI Products 4500lbs UTV Winch Kit U4500

    $270.97

    Product Description:

    Whether its on a winding trail, plowing snow or deep in the mud, a reliable winch is the most important accessory a rider can have. Equip your UTV or SxS with a KFI WINCH and feel confident you can pull yourself out of any situation. This 4500lb UTV Series winch features quality cast aluminum and durable steel components, Water Resistant seals to keep the elements out, a wide 4-hole mounting design and a heavy duty all metal turn clutch. It is also backed by a KFI 1-Year Limited Warranty. The KFI U4500w Winch comes with everything you need other than a UTV model specific winch mount. Everything shown is included along with detailed installation instructions and hardware to mount your winch to a model specific UTV winch mount.

    Specifications:

    • Model: U4500 UTV Series
    • Rated Line Pull: 4500 lbs.
    • Motor: 12V DC, 1.7 hp Permanent Magnet
    • Gear Ratio: 166:1
    • Gear/Transmission: All-metal Planetary Gear Drive
    • Brake: Dynamic and Mechanical Clutch (free spooling): All Metal Cam Activated Freespool
    • Drum Size: 2" (D) x 3.19" (L)
    • Cable: 15/64" (D) x 38' (L)
    • Fairlead: Multi-directional Roller
    • Control: Deluxe Handlebar-Mounted Mini-Rocker Control Switch with optional dash mount bracket and a Heavy Duty Corded Remote Switch
    • Winch Dimensions:14.6" L x 4.55" D x 5" H
    • Mount Plate: Fairlead Mount Only (A Model Specific Mount is necessary for your make and model UTV)
    • Mounting Bolt Pattern:3.00" x 4.875" (4-Hole)
    • Recommended Battery : 12 Amp/hour minimum
    • Warranty: Limited 1 Year
    • Winch Weight: 36.6 lbs. (complete kit)
    Learn More
  5. Tarter 4' x 8' ATV Chain Harrow with 4' Drawbar ATVH48

    Tarter 4' x 8' ATV Chain Harrow with 4' Drawbar ATVH48

    $299.99

    Garden tractors or ATVs can pull this flexible Chain Harrow. Ideal for smoothing yards or garden soil and dragging driveways, riding tracks or arena footing. This harrow allows dozens of metal teeth to set up when pulled to grab the soil or grade surface. Harrows are 4' x 8'

    Learn More
  6. Superwinch Terra 25 Synthetic Rope 12 Volt 2500lb Winch 1125230

    Superwinch Terra 25 Synthetic Rope 12 Volt 2500lb Winch 1125230

    $289.97

    The heavy duty permanent magnet motor includes larger diameter wire within the winding (nearly twice as thick as the competition) and sealed bearings at both ends of the motor (the competition only uses one bearing and a cheap bushing on the opposite end). The highest horsepower/torque and lowest amperage draw in the industry, pulls more weight longer and faster in deep mud and water, and puts the least amount of drain on the battery

    Superwinch synthetic ropes are genuine AmSteel-Blue™ with Samthane™, a special coating to help resist abrasion. The raw material in AmSteel-Blue™ is made from genuine Dyneema® SK-75 HMPE fiber, "which is the worlds strongest fiber™" made by Sampson Rope Technologies.

    AmSteel®-Blue is a torque-free 12-strand single braid that yields the maximum in strength-to-weight ratio and, size for size, is the same strength as steel—yet it floats. AmSteel®-Blue outlasts wire 3:1, making it an excellent wire rope replacement. It has extremely low stretch and superior flex fatigue and wear resistance. Average strength is 5,400 lbs. and minimum strength is 4,900 lbs. Elastic elongation is only 0.96% at 30% of the break strength.

    You will need a winch mount plate kit to install this winch on your ATV, UTV or Side-by-Side. Click on the ATV Application Guide to find the kit for your vehicle.

    Product Features
    • Rated Line Pull: 2,500 lbs (1,134 kgs)
    • Motor: Sealed 1.3 HP Permanent Magnet
    • Gearing: 3-Stage Planetary
    • Gear Ratio: 140:1
    • Solenoid: Sealed and Circuit Breaker Protected
    • Clutch: Free-Spooling, Ergonomic Control
    • Brake: Automatic 100% Load Holding
    • Rope: Synthetic 3/16" x 50' (4.8mm x 15.2m)
    • Hook: Heavy-Duty, Clevis Pinned Latch
    • Fairlead: Blue Anodized Aluminum Hawse
    • Remote: 10' Sealed Hand-Held
    • Dimensions: 13.2” L x 4.5” D x 4.8” H (335mm L x 114mm D x 122mm)
    • Drum Diameter: 2.0" (50.8mm)
    • Drum Length: 3.2" (81.3mm)
    • Mounting Bolt Pattern: 3.0" x 6.66" (76mm x 169mm)
    • Installed Weight: 15 lbs (6.8 kgs)
    • Shipping Weight: 23.7 lbs (10.8 kgs)
    • Warranty: Limited Lifetime
    • Line Pull at 0 lbs: 25 Amps Motor Draw / 25.0 FPM (7.6 MPM) Line Speed
    • Line Pull at 2,500 lbs: 162 Amps Motor Draw / 9.5 FPM (2.9 MPM) Line Speed
    Learn More
  7. Rigid Industries E2 4 in. Driving LED Light Bar 17361

    Rigid Industries E2 4 in. Driving LED Light Bar 17361

    $284.99

    The Original LED Light Bar - The Rigid Industries E-Series was the first projected LED light bar. Since its introduction in 2006, the E-Series light bar has set the standard in the industry through continuing advances in technology and superior engineering. Available in a wide range of lengths and configurations, this flagship is the light bar of choice for everything from light truck / car applications and vehicle race teams to farming equipment and police / fire rescue vehicles. The E-Series light bar is designed to project light at extreme distances while consuming very little power. It features an extruded aluminum housing and polycarbonate lens that is sealed against the elements to provide years of trouble-free operation.

    Specter Optics - Rigid's patented Specter optics system features 50% more LED's than the Hybrid optics in the same footprint and is specifically designed to cover more area. By incorporating a reflector with no facets or orange peel, the Specter optics system produces an intense, smooth beam with minimal wasted light.

    Driving Pattern - Rigid's engineering team designed the Driving version of the Specter optics system to project light not only far, but also wide. This light utilizes a narrow, oval-shaped reflector that projects both spot and flood beam patterns. Rather than a conical beam, this technology creates an oblong beam that maintains a bright center hot spot, as well as incredible horizontal dispersion.

    Quality Construction - Rigid's circuitry is designed in-house to be more powerful, be more efficient, and generate less heat. The durable aluminum housings feature custom, over-sized heat sinks which keep the temperature down and allow the LED's to run cooler and brighter. All Rigid Industries LED lights receive a high quality powder coat finish, a custom-molded rubber seal, and an unbreakable, scratch resistant lens. Rigid Industries LED lights are engineered to withstand whatever you, the road, or nature can throw at them.

    • Patented Specter Optics
    • New 2-Piece Construction
    • [var:feature-driving]
    • 50,000+ Hr LED Lifespan
    • Instant On / Off - No Warm Up
    • RoHS Compliant
    • Over / Under Voltage Protection
    • Durable Polycarbonate Lens
    • Integrated Thermal Managament
    • GORE® Pressure Equalizing Vent
    • Designed, Engineered & Assembled in the USA

    Kit Includes: Plug and Play Harness with Switch as well as Mounting bracket and hardware.

    Watts 45
    Amp Draw 3.26
    LED's 12
    Raw Lumens 4500
    Lux @ 10m 260
    Beam Distance 322 m
    Peak Beam Intensity 26,000 cd
    Mount Type Surface
    Length 4 in.
    Finish Color Black
    LED Color White
    Optics Specter - Driving
    Family E-Series


    Learn More
  8. Detail K2 C4500EWX 4,500 lb. 12V Steel Cable Electric Winch 450ES12-CAD

    Detail K2 C4500EWX 4,500 lb. 12V Steel Cable Electric Winch 450ES12-CAD

    $299.97

    High quality three stage planetary gearing ensure this is one of the quietest and smoothest winches on the market. The silky smooth performance and the full load holding brake make it the perfect solution for high spec applications.

    Standard Accessories:

    • 0.3 inch x 48 ft Steel Cable
    • 10 ft Remote Handset
    • Heavy Duty Roller Fairlead
    • Heavy Duty Battery Leads
    • Mounting plate
    • Mounting hardware
    • 3/8 hook
    • ATV remote available

    Outstanding Features:

    • Power in and Power out
    • High Torque 1.95hp Motor
    • H D Waterproof Contactors
    • Full Steel Planetary Gearing
    • Mount Plate as Standard
    • Full Load Holding Break
    • Can fit tow ball mount

     

    Specifications
    Rated Line Pull 4500 lbs (2041 kg)
    Motor 12V : 1.95 hp / 1.37 kw
    Gearing 172:1
    Braking Action Auto in the drum
    Drum Size (Dia x L)  1.8" x 3.8" L
    Cable (Dia x L) 0.3" x 48' L
    Mounting Pattern 5.1" x 3.8"
    Dimensions 14.2" x 5" x 6.5"
    Weight 29 lbs
    Learn More
  9. KFI Products 4500 lb UTV Winch Kit (Wide) U4500W

    KFI Products 4500 lb UTV Winch Kit (Wide) U4500W

    $279.97
    Specifications
    • Model: U4500w UTV Series (WIDE)
    • Rated Line Pull: 4500 lbs.
    • Motor: 12V DC, 1.7 hp Permanent Magnet
    • Gear Ratio: 166:1
    • Gear/Transmission: All-metal Planetary Gear Drive
    • Brake: Dynamic and Mechanical
    • Clutch (free spooling): All Metal Cam Activated Freespool
    • Drum Size: 2" (D) x 4.92" (L)
    • Cable: 15/64" (D) x 52' (L)
    • Fairlead: Multi-directional Roller
    • Control: Deluxe Handlebar-Mounted Mini-Rocker Control Switch with optional dash mount bracket and a Heavy Duty Corded Remote Switch
    • Winch Dimensions: 16.22" L x 4.55" D x 5" H
    • Mount Plate: Fairlead Mount Only (A Model Specific Mount is necessary for your make and model UTV)
    • Mounting Bolt Pattern: 3.00" x 6.60" (4-Hole)
    • Recommended Battery : 12 Amp/hour minimum
    • Warranty: Limited 1 Year
    • Winch Weight: 37 lbs. (complete kit)
    Learn More
  10. Rigid Industries Marine SR 10 in. Diffused LED Spreader Light 31051

    Rigid Industries Marine SR 10 in. Diffused LED Spreader Light 31051

    $299.24

    Low Profile - The Rigid Industries SR-Series (single row) Light Bar, like the flagship E-Series, leads the industry in low profile performance LED lighting. Available in a wide range of lengths and configurations, the SR-Series light bar is the perfect low-profile option for everything from on and off-road racing to police and fire rescue vehicles to marine applications. The SR-Series light bar is designed to project light at extreme distances while consuming very little power. Its durable extruded aluminum housing and virtually unbreakable polycarbonate lens are sealed against the elements for years of trouble-free operation.

    Spreader Light - Bright lights that are designed to cover a wide area. Used on many types of marine applications from Sail boat masts and off shore fishing boat towers to light up the fishing area or deck. Power boats, fishing boats and other boating platforms also use spreader lights are used to light up decks, underneath gunnels and anywhere you need to light up a large area. Similar to the power of a flood light, the spreader lights provide more of a “cloud” of light to help give you more coverage using less power.

    Marine Grade - The Marine Series products are given special attention due to the elements they will be exposed to in a marine environment. The aluminum housing receives a chromate conversion coating that acts as a corrosion inhibitor against elements such as salt. The housing is then given a high quality, UV-resistant powder coat finish. Rigid uses 316 marine-grade stainless steel hardware that receives a coating that's been tested for over 1,000 hrs of corrosion resistance. The mounting bracketry included with the marine products is also 316 stainless steel. This product does not include a wire harness or switch, due to the fact that most installations on marine equipment are custom and require smaller holes and unique components.

    Hybrid Optics - Rigid's patented Hybrid optics system is the most powerful, most efficient LED optics system on the market. Utilizing a combination of lens and reflector, the Hybrid optics system captures the maximum amount of light emitted from the LED and projects it exactly where you want it.

    Diffusion Lens - Perfect for scene or area lighting, the diffusion lens was specifically engineered to project light at a 60º flood pattern. Combine that with Rigid's patented optics and you have the best LED flood light in the industry. Like the standard lens, the diffusion lens is made from optically clear, unbreakable polycarbonate plastic.

    Quality Construction - Rigid's circuitry is designed in-house to be more powerful, be more efficient, and generate less heat. The durable aluminum housings feature custom, over-sized heat sinks which keep the temperature down and allow the LED's to run cooler and brighter. All Rigid Industries LED lights receive a high quality powder coat finish, a custom-molded rubber seal, and an unbreakable, scratch resistant lens. Rigid Industries LED lights are engineered to withstand whatever you, the road, or nature can throw at them.

    • Patented Hybrid Optics
    • Spot / Flood Combo
    • 50,000+ Hr LED Lifespan
    • Instant On / Off - No Warm Up
    • RoHS Compliant
    • Over / Under Voltage Protection
    • Extruded Aluminum Housing
    • Durable Polycarbonate Lens
    • Integrated Thermal Managament
    • GORE® Pressure Equalizing Vent
    • Designed, Engineered & Assembled in the USA

     

    Watts 37.5
    Amp Draw 2.6
    LED's 10
    Raw Lumens 3750
    Lux @ 10m 29.0
    Beam Distance 108 m
    Peak Beam Intensity 2900 cd
    Mount Type Surface
    Length 10 in.
    Finish Color White
    LED Color White
    Optics Hybrid - Diffused
    Family SR-Series
    Learn More

Items 1-10 of 21

per page
Page:
  1. 1
  2. 2
  3. 3

Grid List

Set Ascending Direction