Designed for the Kawasaki Teryx 4 (4-seater) UTV. This mount is designed to work with most of the winches with the 2-Hole mounting pattern of 3.100", the 4-Hole mounting pattern of 3.00"x4.875", and the 4-Hole WIDE mounting pattern of 3.00" x 6.60". It also requires a roller fairlead or hawse with a bolt up pattern of 4.875" or 6.000". Will NOT work with Warn Vantage 4000 due to lead rotation. ProVantage 3500 and 4500 will require Lead rotation.Learn More
- Fits most ATV’s
- Gel padding and ergonomic design provides maximum cushioning and temperature control for exceptional riding comfort
- Easy to install with velcro straps
- Front - 14 inches
- Back - 21 inches
- Length - 30 inches
These E-Series Light Covers from Rigid Industries are the perfect solution for style and function. Give your vehicle a unique look while also protecting your investment. These light covers are made from a durable polycarbonate plastic that offers an extra layer of protection for the lens of your E-Series LED light. These covers snap on and off, so swapping them out is simple and easy. They are also perfect for states that require covers on accessory lights.
- Easy to Snap On & Off
- Polycarbonate Plastic
- Extra Layer of Protection
$46.97Fits Following Models
- All 2010 - 2013 Can-Am Commanders
- 100% MADE IN USA
- Constructed of 3/16” steel
- Unlike all other mount competitors our mounts are metal bead blasted before they are powder coated for the best possible finish prep.
- Powder coated black for supreme durability
- Complete installation instructions included
- All mounting hardware included
- Satisfaction guaranteed
- Roller fairlead and winch not included
Designed for the Following Winches
- KFI: A2500 / A3000 / U4500 / U4500w
- Warn : U2500 / A2000 / A2500 / 1.5ci / 2.5ci / 2.5ce / 3.0ci / 3.0ce
- Warn : RT15 / RT25 / RT30 / XT15 / XT25 / XT30
- Warn : RT40 / XT40
- RAMSEY : ATV2500 / ATV3000
- MILE MARKER: PE2500 / VMX2.5
- SUPERWINCH: All ATV/UTV Winches
- CHAMPION: C10013 / C10014 / C10018
- CHAMPION : C20049 / C20049-2 / C20051 / C20249 / C30045 / C30145
- VENOM : 2000/2500/3500/4000/4500X-H (Standard and Wide)
- Must HAVE Standard ATV Winch 4-hole bolt pattern of 3.00" X 4.875 or UTV 3.00” x 6.60"
- Must have standard ATV Fairlead bolt pattern of 4.875” or UTV of 6.00"
- Must HAVE Standard ATV Winch 2-hole bolt pattern of 3.10"
- Must have standard ATV Fairlead bolt pattern of 4.875”
The ATV TEK Arch Series Fender Bag has a convenient zipper-free design with strap & buckle closures for quick access to your gear while at the same time sealing out dust and water with its arched lid. It has an adjustable top compartment with divided shelf and a separate storage pocket underneath. Made of PVC-coated, 600-denier polyester.
- Mossy Oak Break-Up
- 650 cubic inches of storage
- Custom flap allows for you to fit your drink of choice
- Dimensions: 24" L x 8" W x 6" D
- Fits Gun Boot® IV and Gun Boot® 6.0 cases only!
- All-metal constructed loop bracket
- Bracket can be adjusted to multiple angle positions between 0° and 45°
- Rubber coated ring holds your Gun Boot® case securely
- Locking pin prevents additional movement and vibration when bouncing over rugged terrain
- Compact design provides more room on ATV racks
- Custom design base plate incorporates built-in KXP mounting system
- Compatible with Polaris® composite ATV racks using the Polaris® Lock & Ride® System
- Eliminate rear suspension sag when under load
- Highly recommended for use with the Kolpin DirtWorks 3-Point System as it connects from 3-Point Hitch to rear rack
- Can be used for pulling a boat, trailer, ice house or even during ATV pulls
- For ATV models with solid rear suspension, but please review our fit list for model specifics
- Constructed of steel with glass infused nylon plastic turn knob with a brass threaded insert
- 1/4-turn knob allows for quick & easy removal of the fuel pack from bracket
- Designed to hold (2) Kolpin Fuel Pack Jr. (sold separately)
- Mountable to any tubular ATV rack
- Uses minimal rack space