McAfee SECURE sites help keep you safe from identity theft, credit card fraud, spyware, spam, viruses and online scams

ORDER BY PHONE:

1-800-561-1752

7AM - 5PM CST 7 Days a Week

WIN A $200 GIFT CERTIFICATE

Enter the contest by signing up for our newsletter

FREE SHIPPING*

ON ORDER $99+

View Details

ATV/UTV

ATV/UTV

7 Item(s)

per page

Grid List

Set Ascending Direction
  1. Superwinch Terra 45 Synthetic Rope 12 Volt 4500lb Winch 1145230

    Superwinch Terra 45 Synthetic Rope 12 Volt 4500lb Winch 1145230

    $274.99

    The heavy duty permanent magnet motor includes larger diameter wire within the winding (nearly twice as thick as the competition) and sealed bearings at both ends of the motor (the competition only uses one bearing and a cheap bushing on the opposite end). The highest horsepower/torque and lowest amperage draw in the industry, pulls more weight longer and faster in deep mud and water, and puts the least amount of drain on the battery.

    Superwinch synthetic ropes are genuine AmSteel-Blue™ with Samthane™, a special coating to help resist abrasion. The raw material in AmSteel-Blue™ is made from genuine Dyneema® SK-75 HMPE fiber, "which is the worlds strongest fiber™" made by Sampson Rope Technologies.

    AmSteel®-Blue is a torque-free 12-strand single braid that yields the maximum in strength-to-weight ratio and, size for size, is the same strength as steel—yet it floats. AmSteel®-Blue outlasts wire 3:1, making it an excellent wire rope replacement. It has extremely low stretch and superior flex fatigue and wear resistance. Average strength is 8,600 lbs. and minimum strength is 7,700 lbs. Elastic elongation is only 0.96% at 30% of the break strength.

    You will need a winch mount plate kit to install this winch on your ATV, UTV or Side-by-Side. Click on the ATV Application Guide to find the kit for your vehicle.

    Product Features
    • Rated Line Pull: 4,500 lbs (2,041 kgs)
    • Motor: Sealed 1.6 HP Permanent Magnet
    • Gearing: 3-Stage Planetary
    • Gear Ratio: 191:1
    • Solenoid: Sealed Solenoid with Circuit Breaker
    • Clutch: Free-Spooling, Ergonomic Control
    • Brake: Automatic 100% Load HoldingRope: Synthetic 1/4" x 50' (6.5mm x 15.2m)
    • Hook: Heavy-Duty Clevis Pinned Latch
    • Fairlead: Blue Anodized Aluminum Hawse
    • Remote: 10' Sealed Hand-Held
    • Dimensions: 15.1" L x 4.5" D x 4.8" (384mm L x 114mm D x 122mm H)
    • Drum Diameter: 2.0" (50.2mm)
    • Drum Length 4.9" (124.5mm)
    • Mounting Bolt Pattern: 3.0" x 6.66" (76mm x 169mm)
    • Installed Weight: 19.0 lbs (8.6 kgs)
    • Shipping Weight: 27.9 lbs (12.65 kg)
    • Warranty: Limited Lifetime Warranty
    • Line Pull at 0 lbs: 21 Amps Motor Draw / 15.0 FPM (4.6 MPM) Line Speed
    • Line Pull at 4,500 lbs: 178 Amps Motor Draw / 5.5 FPM (1.7 MPM) Line Speed
    Learn More
  2. Kolpin RZR Full Tilting Windshield  2010

    Kolpin RZR Full Tilting Windshield 2010

    $274.97

    Product Features

    • Versatile three-position tilt mechanism permits airflow into the driver compartment if desired
    • 1/4” abrasive-resistant GE Lexan MR10
    • Extremely durable injection molded clamps
    • All stainless steel, black coated finish hardware
    • Easy installation
    • Fits 2011 RZR 900 and all RZR Models

    ** The tilt mechanism is designed for cooling the airflow in warm temperatures
    ** Open positions are designed for low-speed airflow ONLY
    ** High-speed riding and trailering require the windshield to be in the FULL CLOSED position

    Learn More
  3. Kolpin Polaris Ranger 2005-08 / 2009 Specific Half-Folding Windshield  2610

    Kolpin Polaris Ranger 2005-08 / 2009 Specific Half-Folding Windshield 2610

    $274.97

    Product Features

    • Convenient half-folding design
    • 1/4” abrasive-resistant GE Lexan MR10
    • Injection-molded clamps and hinges
    • Black coated finish hardware
    • Easy to install
    • Lip on upper shield deflects air over operator and passenger

    Application Chart:

    2005
    o Ranger 4x4, 6x6
    o Ranger XP

    2006
    o Ranger 500 4x4, 4x4 EFI
    o Ranger 700 4x4 XP
    o Ranger 700 6x6 EFI

    2007
    o Ranger 500 4x4, 4x4 EFI
    o Ranger 700 4x4 EFI/LE
    o Ranger 700 6x6 EFI

    2008
    o Ranger 500 4x4 EFI
    o Ranger 700 4x4 EFI, XP
    o Ranger 700 6x6 EFI
    o Ranger 700 4x4 EFI CREW

    2009
    o Ranger 500 4x4 EFI
    o Ranger 700 6x6 EFI
    o Ranger 700 4x4 EFI CREW

    Learn More
  4. Kolpin Big Red Half Folding Windshield  2301

    Kolpin Big Red Half Folding Windshield 2301

    $274.97

    Product Features

    • Convenient half-folding design
    • 1/4” abrasive-resistant GE Lexan MR10
    • Injection-molded clamps and hinges
    • Black coated finish hardware
    • Easy to install
    • Lip on upper shield deflects air over operator and passenger
    • Fits All Big Red Models
    Learn More
  5. Rigid Industries E2 4 in. Hyperspot LED Light Bar 17371

    Rigid Industries E2 4 in. Hyperspot LED Light Bar 17371

    $284.99

    The Original LED Light Bar - The Rigid Industries E-Series was the first projected LED light bar. Since its introduction in 2006, the E-Series light bar has set the standard in the industry through continuing advances in technology and superior engineering. Available in a wide range of lengths and configurations, this flagship is the light bar of choice for everything from light truck / car applications and vehicle race teams to farming equipment and police / fire rescue vehicles. The E-Series light bar is designed to project light at extreme distances while consuming very little power. It features an extruded aluminum housing and polycarbonate lens that is sealed against the elements to provide years of trouble-free operation.

    Specter Optics - Rigid's patented Specter optics system features 50% more LED's than the Hybrid optics in the same footprint and is specifically designed to cover more area. By incorporating a reflector with no facets or orange peel, the Specter optics system produces an intense, smooth beam with minimal wasted light.

    Hyperspot - 5 degree ultra-narrow concentrated Spot beam pattern for long distance applications. Patent pending aperture system blocks unused light for a clean beam. Highest intensity per watt or square inch on the market as well as Maximum Distance!

    Quality Construction - Rigid's circuitry is designed in-house to be more powerful, be more efficient, and generate less heat. Tje durable aluminum housings feature custom, over-sized heat sinks which keep the temperature down and allow the LED's to run cooler and brighter. All Rigid Industries LED lights receive a high quality powder coat finish, a custom-molded rubber seal, and an unbreakable, scratch resistant lens. Rigid Industries LED lights are engineered to withstand whatever you, the road, or nature can throw at them.

    • Patented Specter Optics
    • New 2-Piece Construction
    • Hyperspot Pattern
    • 50,000+ Hr LED Lifespan
    • Instant On / Off - No Warm Up
    • RoHS Compliant
    • Over / Under Voltage Protection
    • Durable Polycarbonate Lens
    • Integrated Thermal Managament
    • GORE® Pressure Equalizing Vent
    • Designed, Engineered & Assembled in the USA

    Kit Includes: Plug and Play Harness with Switch as well as Mounting bracket and hardware.

    Watts 40
    Amp Draw 2.90
    LED's 8
    Raw Lumens 3520
    Lux @ 10m 1920
    Beam Distance 876 m
    Peak Beam Intensity 192,000 cd
    Mount Type Surface
    Length 4 in.
    Finish Color Black
    LED Color White
    Optics Specter - Hyperspot
    Family E-Series


    Learn More
  6. Rigid Industries E2 4 in. Diffused LED Light 17351

    Rigid Industries E2 4 in. Diffused LED Light 17351

    $284.99

    The Original LED Light Bar - The Rigid Industries E-Series was the first projected LED light bar. Since its introduction in 2006, the E-Series light bar has set the standard in the industry through continuing advances in technology and superior engineering. Available in a wide range of lengths and configurations, this flagship is the light bar of choice for everything from light truck / car applications and vehicle race teams to farming equipment and police / fire rescue vehicles. The E-Series light bar is designed to project light at extreme distances while consuming very little power. It features an extruded aluminum housing and polycarbonate lens that is sealed against the elements to provide years of trouble-free operation.

    Specter Optics - Rigid's patented Specter optics system features 50% more LED's than the Hybrid optics in the same footprint and is specifically designed to cover more area. By incorporating a reflector with no facets or orange peel, the Specter optics system produces an intense, smooth beam with minimal wasted light.

    Diffusion Lens - Perfect for scene or area lighting, the diffusion lens was specifically engineered to project light at a 60º flood pattern. Combine that with Rigid's patented optics and you have the best LED flood light in the industry. Like the standard lens, the diffusion lens is made from optically clear, unbreakable polycarbonate plastic.

    Quality Construction - Rigid's circuitry is designed in-house to be more powerful, be more efficient, and generate less heat. The durable aluminum housings feature custom, over-sized heat sinks which keep the temperature down and allow the LED's to run cooler and brighter. All Rigid Industries LED lights receive a high quality powder coat finish, a custom-molded rubber seal, and an unbreakable, scratch resistant lens. Rigid Industries LED lights are engineered to withstand whatever you, the road, or nature can throw at them.

    • Patented Specter Optics
    • New 2-Piece Construction
    • 60° Diffused Pattern
    • 50,000+ Hr LED Lifespan
    • Instant On / Off - No Warm Up
    • RoHS Compliant
    • Over / Under Voltage Protection
    • Durable Polycarbonate Lens
    • Integrated Thermal Managament
    • GORE® Pressure Equalizing Vent
    • Designed, Engineered & Assembled in the USA

    Kit Includes: Plug and Play Harness with Switch as well as Mounting bracket and hardware.

    Watts 45
    Amp Draw 3.26
    LED's 12
    Raw Lumens 4500
    Lux @ 10m 35
    Beam Distance 118 m
    Peak Beam Intensity 3500 cd
    Mount Type Surface
    Length 4 in.
    Finish Color Black
    LED Color White
    Optics Specter - Diffused
    Family E-Series


    Learn More
  7. Rigid Industries E2 4 in. Driving LED Light Bar 17361

    Rigid Industries E2 4 in. Driving LED Light Bar 17361

    $284.99

    The Original LED Light Bar - The Rigid Industries E-Series was the first projected LED light bar. Since its introduction in 2006, the E-Series light bar has set the standard in the industry through continuing advances in technology and superior engineering. Available in a wide range of lengths and configurations, this flagship is the light bar of choice for everything from light truck / car applications and vehicle race teams to farming equipment and police / fire rescue vehicles. The E-Series light bar is designed to project light at extreme distances while consuming very little power. It features an extruded aluminum housing and polycarbonate lens that is sealed against the elements to provide years of trouble-free operation.

    Specter Optics - Rigid's patented Specter optics system features 50% more LED's than the Hybrid optics in the same footprint and is specifically designed to cover more area. By incorporating a reflector with no facets or orange peel, the Specter optics system produces an intense, smooth beam with minimal wasted light.

    Driving Pattern - Rigid's engineering team designed the Driving version of the Specter optics system to project light not only far, but also wide. This light utilizes a narrow, oval-shaped reflector that projects both spot and flood beam patterns. Rather than a conical beam, this technology creates an oblong beam that maintains a bright center hot spot, as well as incredible horizontal dispersion.

    Quality Construction - Rigid's circuitry is designed in-house to be more powerful, be more efficient, and generate less heat. The durable aluminum housings feature custom, over-sized heat sinks which keep the temperature down and allow the LED's to run cooler and brighter. All Rigid Industries LED lights receive a high quality powder coat finish, a custom-molded rubber seal, and an unbreakable, scratch resistant lens. Rigid Industries LED lights are engineered to withstand whatever you, the road, or nature can throw at them.

    • Patented Specter Optics
    • New 2-Piece Construction
    • [var:feature-driving]
    • 50,000+ Hr LED Lifespan
    • Instant On / Off - No Warm Up
    • RoHS Compliant
    • Over / Under Voltage Protection
    • Durable Polycarbonate Lens
    • Integrated Thermal Managament
    • GORE® Pressure Equalizing Vent
    • Designed, Engineered & Assembled in the USA

    Kit Includes: Plug and Play Harness with Switch as well as Mounting bracket and hardware.

    Watts 45
    Amp Draw 3.26
    LED's 12
    Raw Lumens 4500
    Lux @ 10m 260
    Beam Distance 322 m
    Peak Beam Intensity 26,000 cd
    Mount Type Surface
    Length 4 in.
    Finish Color Black
    LED Color White
    Optics Specter - Driving
    Family E-Series


    Learn More

7 Item(s)

per page

Grid List

Set Ascending Direction