Designed for winches with a rated line pull up to 4,000 lbs. including the EX1, X1, X2, LT2000, UT3000, LT3000ATV, S3000, S4000, Terra 25 and Terra 35.
The Superwinch pulley block is specifically designed for maximizing the pulling power of a winch. This 8,000 lb pulley block allows the winch to effectively use the power of the “double line pull”.
The hook on the pulley block is removed and the winch cable line is run over the pulley. The pulley block hook is then replaced and then attached to a strap wrapped on the forward fixed-object. The hook on the winch cable end is attached to the front of the vehicle being pulled-or to a fixed object close to the front of the vehicle.Learn More
The Winch-In-A-Bag PLUS, a convenient kit with everything you need to keep going. Whether rescuing yourself or others from danger, unloading or loading your boat, off-road with your 4-wheel drive vehicle, ATV, or snowmobile, or on the job site pulling a load closer to your truck, this winch is handy and ready.
The Winch-In-A-Bag Plus is a complete winching solution in a convenient kit that features a 2,500 lb rated line pull winch on a patented powder coated winch platform, a Teflon winch rope guide, and 40 feet of 3/16 inch wire rope with latch hook and rope thimble. An eight foot remote control allows the user to operate the winch at a safe distance. The kit also includes two six foot heavy duty choker straps, a one ton bow shackle, and a pair of heavy-duty winch gloves, all in a compact, easy to carry storage and travel bag.
The completely portable Winch-In-A Bag plus requires no installation and does not require a winch mount. It can be carried from vehicle to vehicle and is designed for fast setup and usage with any vehicle. The kit is easy to store, use, and repack. It is the perfect companion for any personal vehicle, recreational, off-road, or work activity.Product Features
- Rated Line Pull: 2,500 lbs (1,134 kgs)
- Motor: 1.1 HP (.82kw) Permanent Magnet
- Gearing: 1-Stage Planetary
- Gear Ratio: 153:1
- Solenoid: N/A, Circuit Breaker Protected
- Clutch: Free-Spooling, Ergonomic Control
- Brake: N/A
- Rope: Wire 3/16" x 40' (4.8mm x 12.0m)
- Hook: 1/4" Heavy-Duty, Clevis-Pinned Latch
- Fairlead: Teflon® Winch Rope Guide
- Remote: 8' Hand-held
- Dimensions: 11.75” L x 9.0” W x 7.0” H (296mm L x 229mm W x 178mmH)
- Drum Diameter: 1.61" (41.0mm)
- Drum Length: 2.9" (74mm)
- Mounting Bolt Pattern: Portable - no mount required
- Installed Weight: Installed Weight: 18.15 lbs (8.23 kgs)
- Shipping Weight: 26.9 lbs (12.2 kgs)
- Warranty: Limited One-Year
Thia grill only works with mount 100560Product Specifications
- 100% MADE IN USA
- Constructed of 10 GA. steel
- Unlike all other competitors our grills are metal bead blasted before they are powder coated for the best possible finish prep.
- Powder coated black wrinkle for supreme durability
- Very easy to install
- Satisfaction guaranteed
Designed to Work With the Following Winches
- KFI: U4000w
- Warn: 4.0ci / RT40 / XT40
- CHAMPION: C40252
- SUPERWINCH : UTV4000
- Standard UTV Winch 4-Hole bolt pattern of 3.000" X 6.600"
Talon Heavy Duty Series Advantage - Speed and power make our Talon Series winches ideal for recovery and super duty applications. Available in 14,000 and 18,000 lbs with either steel or synthetic ropes. These 2-stage planetary gear winches are packed with essential and extra practical features for efficient, reliable, and safe winching operations under the heaviest loads.Product Features
- Rated Line Pull: 14,000 lbs (6,350 kgs)
- Motor: Sealed 5.2 hp (3.8 kw) Series Wound
- Gearing: 2-Stage Planetary and 2-Stage Spur
- Gear Ratio: 346:1
- Solenoid: Vented, Sealed Submersible Solenoid with 3-Year Warranty
- Clutch: Free-spooling Clutch/Pull and Turn
- Brake: Automatic/100% Load Holding (outside of drum)
- Rope: Synthetic Rope 1/2” x 90’ (13mm x 27.43m)
- Hook: Heavy Duty/Clevis Pinned/Latched
- Fairlead: Anodized Blue Aluminum Hawse with Engraved Superwinch Logo
- Remote: 15' Sealed Ergonomic Hand-held with Coiled Cord
- Dimensions: 27.15” L x 8.46” D x 11.57” H (689.5mm L x 215mm D x 294.21mm H)
- Drum Diameter: 3.5” (88.9mm)
- Drum Length: 8.75” (222.2mm)
- Mounting Bolt Pattern: 10” x 4.5” (254mm x 114.3mm) & 10” x 6.5” (254mm x 165.1mm)
- Installed Weight: 145 lbs (65.7 kgs)
- Shipping Weight: 158 lbs (71.6 kgs)
- Warranty: Limited Lifetime Warranty/3-Year Electrical
- Line Pull at 0 lbs: 75 Amps Motor Draw / 25 FPM (7.62 MPM) Line Speed
- Line Pull at 14,000 lbs 345 Amps Motor Draw /4.25 FPM (1.29 MPM) Line Speed
$43.97Fits Following Models
- All 2010 - 2013 Can-Am Commanders
- 100% MADE IN USA
- Constructed of 3/16” steel
- Unlike all other mount competitors our mounts are metal bead blasted before they are powder coated for the best possible finish prep.
- Powder coated black for supreme durability
- Complete installation instructions included
- All mounting hardware included
- Satisfaction guaranteed
- Roller fairlead and winch not included
Designed for the Following Winches
- KFI: A2500 / A3000 / U4500 / U4500w
- Warn : U2500 / A2000 / A2500 / 1.5ci / 2.5ci / 2.5ce / 3.0ci / 3.0ce
- Warn : RT15 / RT25 / RT30 / XT15 / XT25 / XT30
- Warn : RT40 / XT40
- RAMSEY : ATV2500 / ATV3000
- MILE MARKER: PE2500 / VMX2.5
- SUPERWINCH: All ATV/UTV Winches
- CHAMPION: C10013 / C10014 / C10018
- CHAMPION : C20049 / C20049-2 / C20051 / C20249 / C30045 / C30145
- VENOM : 2000/2500/3500/4000/4500X-H (Standard and Wide)
- Must HAVE Standard ATV Winch 4-hole bolt pattern of 3.00" X 4.875 or UTV 3.00” x 6.60"
- Must have standard ATV Fairlead bolt pattern of 4.875” or UTV of 6.00"
- Must HAVE Standard ATV Winch 2-hole bolt pattern of 3.10"
- Must have standard ATV Fairlead bolt pattern of 4.875”