Reduces wire rope wear, especially on pulls at severe angles. For ATV winch with mounting bolt pattern 4.87".
- Delrin Bushings
- Zinc Plated Rollers
- Powder Coated Black
- Hardware Included
- Bolt pattern is ATV standard 4.875"
This Cable Hook Stopper is for the ATV and UTV Winch. It weighs 4 Oz. It is 2 5/8 inches wide and 1 3/4 inches thick. It also comes with the new cable lock. This KFI Cable Hook Stopper will fit between the two outside rollers on an ATV or UTV winch fairlead. It also works great with the synthetic rope and or the slot fairlead.
- Eliminates wear and tear on your rollers from the hook.
- Eliminates hook clatter from going down the trail.
- Protects the winch motor and gears from pulling the cable in to far and bottoming out on the rollers.
- Keeps tension on the hook to eliminate the cable becoming loose.
Take control of your winch with the Mini-Rocker Switch that comes with an adjustable bracket to mount it to your ATV's handle bars and allows you to control your winch with the touch of your finger without ever letting go of your handle bars.Learn More
Rocker Switch Fits Only T1500 and T2000 winchesLearn More
Designed for winches with a rated line pull up to 5,000 lbs. including the X3, Terra 45 and S5000.
The Superwinch pulley block is specifically designed for maximizing the pulling power of a winch. This 10,000 lb pulley block allows the winch to effectively use the power of the “double line pull”.
The hook on the pulley block is removed and the winch cable line is run over the pulley. The pulley block hook is then replaced and then attached to a strap wrapped on the forward fixed-object. The hook on the winch cable end is attached to the front of the vehicle being pulled-or to a fixed object close to the front of the vehicle.Learn More