BriskHeat’s Drum / Pail Warmer is a great solution to prevent drum and pail contents from freezing. The warmer helps maintain elevated temperatures, enabling contents to flow even when ambient temperatures drop as low as 0°F. The built-in thermostat keeps the materials in the drum warm between 67° to 85°F. BriskHeat Corporation has been producing high quality and industrial grade drum and pail warmers for the past 64 years, providing users with unmatchable durability
- Portable plug-and-play design
- Can be used on metal or plastic drums and pails
- Suitable for both outdoor and indoor uses
- Moisture and chemical resistant
- Effective in ambient temperature as low as 0°F
- Extra-wide 4” heater coverage with stretchable spring fastener
- Available in variety of sizes: 5, 15, 30 and 55 gallons
Specifications Voltage: 120VAC Thermostat: Built-in, self-regulates between 67° (+/-9°F) to 85°F (+/-5°F) Power cord: 6-foot power cord with standard 3-prong wall plug Grounded for safety: Patented 360°grounded heating element Watt density: 4 watts/sq in Wattage: 700 Drum Diameter: 14 in. Warmer Length: 44 in. Warmer Width: 4 in.
- Freeze Protection
- Warming contents of drums and pails
- Preventing Chemical Separation or Crystallization
- Keeping paint warm
Dee Zee Nerf Steps - A tubular side step for your vehicle. Constructed of black powder coated steel. 3" round design. Molded plastic step pads provide non-skid stepping areas. Hidden but sturdy bracing and hardware is coated to help prevent rust and keep your tubes strong. Custom Fit - no drilling required.
- 3" Round Tube Steps
- Durable Steel Construction
- Protective UltraBlack Finish
- Molded Plastic Step Pads
- Powder Coated Steel Braces
- 90 Degree Bends Hide Braces
- Custom Fit Application Ensures Quick And Easy Installation
- No Drilling Required For Installation
- Three-Year Warranty
Rags and cloths soaked with solvents, thinners, linseed oil, combustible adhesives and other flammable liquids present a serious fire risk when improperly discarded. Lid opens to no more than 60 degrees and stays closed when not in use, isolating contents from fire sources and limiting oxygen to virtually eliminate the risk of spontaneous combustion. Round construction and elevated base allow circulation of air around can to disperse heat and reduce moisture build-up and rusting. Durable steel construction with a powder-coat finish provides chemical resistance.
- Ten-year warranty.
- Black Powder Coated Aluminum Diamond Plate
- Carrying Handle
- Lockable Clasp
- 20'' long
- 12'' wide
- 9-1/2'' high
The model 912-19 19.2-volt Cordless Grease Gun is for the delivery of grease in a variety of applications and hard to reach areas.
- 8500 PSI rated2 Ni-cad batteries
- Whip Hose with spring guard
- Holds 14 1/2-oz. cartridge
- 2 1500mAh battery packs
- Battery charger (1-hr. charging cycle)
- Multiple loading options (cartridge, suction or bulk)
- Hard plastic storage case
Will satisfy most applications involving hydraulic reservoirs, lubrication and fuel storage tanks, transformers, pumps and gearboxes. The Air Sentry Breathers replace the standard breather or vent cap on virtually all types of industrial equipment, storage tanks, and transformers. They prevent destructive contaminants from entering fluid reservoirs and tanks as air is breathed in and out due to thermal expansion or fluid level changes. Fluid contamination is one of the primary causes of wear and lubricant failure in industrial equipment.
The D-108 Breather is rated for airflow of 100 cfm (750 GPM) and is connected to the tank by a 2" male pipe thread.Learn More
Manual Fuel Nozzle. A aluminum die-cast, pressure type utility nozzle for farm and industry. Has 1-inch NPT inlet and 1-inch fill pipe for leaded gasoline and diesel fuel.
- Retail Display - Pack of 10
Manual Fuel Nozzle. A aluminum die-cast, pressure type utility nozzle for farm and industry. Has 1-inch NPT inlet and 1-inch curved fill pipe for leaded gasoline and diesel fuel.
- Retail Display - Pack of 10