Static Discharge Cable Reel - 75’ retracting static grounding cable with 3/32" diameter galvanized steel cable with 3/16" vinyl cover. Heavy duty construction. 1" solid steel center shaft. Multi position arm guide. Adjustable cable stop.Learn More
Digital meter for dispensing and totalizing motor oils, gear lube, or ATF in pints, quarts, liters, or gallons. Equipped with extension hose, manual nozzle with non-drip attachment and control handle.
- Dispenses/totalizes in quarts , liters or gallons
- 3 1/2" easy to read 5 digit display with .01 increments
- 1/2" NPT threads on inlet and outlet
- Extension hose (1315)
- Manual nozzle with non-drip tip (26)
- Battery type 3VCR1/2AA (62576-001)
- Motor oil
- Gear lube
- Fast Lubes
- General service stations
- Automobile dealerships
- Fleet maintenance
Heavy-duty air treatment unit provides moisture-free air with a touch of oil for lubrication.
- Handles 18 CFM with 100 PSI inlet pressure
- Includes filter, gauge, regulator and oiler
- 1/4" NPT (F)
- 40 micron filter
Rags and cloths soaked with solvents, thinners, linseed oil, combustible adhesives and other flammable liquids present a serious fire risk when improperly discarded. Lid opens to no more than 60 degrees and stays closed when not in use, isolating contents from fire sources and limiting oxygen to virtually eliminate the risk of spontaneous combustion. Round construction and elevated base allow circulation of air around can to disperse heat and reduce moisture build-up and rusting. Durable steel construction with a powder-coat finish provides chemical resistance.
- Ten-year warranty
- 3:1 Stub Pump (1712)
- 32 ft. Reel (1475R)
- Mechanical Meter (1525)
- Tote Bracket (6601)
- Right Angle Coupler
- Rated for 10,000 PSI
Booster Handle with Pressure Relief Valve.
- Each pull of the handle increases pressure to a maximum 10,000 PSI
- Steel construction
- 1/8" NPT inlet/outlet
- Equipped with a pressure relief valve to allow for easy removal of grease coupler
Will satisfy most applications involving hydraulic reservoirs, lubrication and fuel storage tanks, transformers, pumps and gearboxes. The Air Sentry Breathers replace the standard breather or vent cap on virtually all types of industrial equipment, storage tanks, and transformers. They prevent destructive contaminants from entering fluid reservoirs and tanks as air is breathed in and out due to thermal expansion or fluid level changes. Fluid contamination is one of the primary causes of wear and lubricant failure in industrial equipment.
The D-108 Breather is rated for airflow of 100 cfm (750 GPM) and is connected to the tank by a 2" male pipe thread.Learn More
Heavy-Duty Polyethylene Funnel with screen. 9" diameter.
- 9" long x 7/8" felxible spout
- Anti-splash rim with lid
- 3 quart capactiy
- 1" O.D. outlet