In order to meet the demands of EPA2010 standards, commercial vehicle manufacturers have evaluated various engine technologies that will provide low emissions and increased performance.
SCR technology or Selective Catalytic Reduction is the option many engine and truck manufacturers have chosen. In simple terms, a fine mist of emission fluid is dosed into the exhaust that reacts and neutralizes the NOx molecules.
A separate tank is fitted on the SCR truck to house the emission fluid. The rate of consumption for the fluid is 2 to 4% per gallon of diesel fuel. Manufacturers estimate that refueling the emissions tank will occur every other diesel fuel fill up.Learn More
Diesel Kleen +Cetane Boost is a total injector cleaner and performance improver that cleans injectors, boosts cetane and lubricates fuel injection components. To realize the benefits of today’s cleaner-burning fuels, new technology is required to maximize performance. This Max HP Formula restores lost power, smooths rough-running engines and improves fuel economy up to 8%. Diesel Kleen can be used year-round, but it is not a diesel fuel winterizer or antigel. When winter temperatures drop below +30°F. use Diesel Fuel Supplement +Cetane Boost to provide maximum winter protection for your diesel engine.
- Cleans dirty injectors and prevents injector sticking in High Pressure Common Rail (HPCR) and older systems
- Removes deposits on injectors and nozzle tips and prevents future deposits
- Boosts cetane up to 6 numbers – engines run smoother with less power lag and faster cold starts
- Boosts power – reduces need for downshifting
- Improves fuel economy up to 8%
- Contains Slickdiesel Lubricator to protect fuel pumps and injectors from increased wear caused by Ultra Low Sulfur Diesel (ULSD) fuel
- Effective in all diesel fuels, including ULSD, biodiesel and biodiesel blends
- Does not contain alcohol of any kind
- Safe for use in all diesel engines
- Will not void engine manufacturer's warranty when used as directed
This product is to be added to the fuel. DO NOT ADD TO THE DIESEL EXHAUST FLUID TANK.
Diesel Kleen +Cetane Boost does not provide antigel protection – in cold temperatures, use Power Service Diesel Fuel Supplement +Cetane Boost (in the white bottle) to prevent fuel gelling.
Directions: Add entire contents (80 ounces) to 250 gallons of diesel fuel. For maximum cetane boost and quicker fuel injector clean-ups, add entire contents (80 ounces) to 125 gallons of diesel fuel.Learn More
Universal car and truck formula meets or exceeds all ASTM and SAE performance standards. The patented formula protects against corrosion of all cooling system metals, including aluminum, while providing maximum freeze-up and boil-over protection.
- Universal car and truck formula
- Maximum freeze-up/boil-over protection -84°F to +278°F
- Meets or exceeds all major automobile manufacturers specifications
- Patented aluminum protection
- Provides year round protection against rust and corrosion
Super Seal is for home and industrial applications to be used with R22, 502 & R410a Systems. It repairs leaks in evaporators, condensors, copper lines and solder joints. This product is an epoxy that reacts to water and air. When coming in contact with the atmosphere, it forms a seal over the leak. If your system stays charged for one day when running, this product will fix most leaks that you may encounter.
If there is air and water in your system, pull a deep vac on the system and boil moisture out of the system.
In most cases, if a system has not leaked below 15 psi, there is typically not air or moisture in the system. The system has greater pressure than what the atmospheric pressure is and cannot leak unless the system is below 15 degrees.
Note: A/C unit must be in operational condition and running before Super Seal can be installed.
- Install the can to the can tap (raise piercing valve so it does NOT pierce can)
- Connect the other end to your A/C unit (low pressure port -- big line)
- Turn on your A/C unit
- Pierce the can. Open the valve slowly with the can upside down. (Valve not included)
- When the can is empty, change the can and continue charging with refrigerant until you reach the manufacturer's pressure specs.
This product cannot go expedited shipping, must go UPS Ground or Freight.Learn More
Havoline Automatic Transmission Fluid ATF+4 is formulated with high purity synthetic base stocks. It is designed to maintain its viscosity through excellent oxidation stability and use of long lasting viscosity modifiers. It has improved low temperature fluidity and viscosity breakdown performance over previous generation Chrysler ATF fluids. Havoline Automatic Transmission Fluid ATF+4 is specially formulated to give full protection in all critical areas of Chrysler transmission operation.
- Lubricates and prevents wear in gears, clutches, and bearings.
- Transfers engine power effectively.
- Removes heat efficiently.
- Operates well over a wide temperature range.
- Resists thermal and oxidative breakdown.
- Provides sufficient viscosity at high temperatures with minimal sheardown.
- Gives proper friction performance for Chrysler vehicles (smooth shift feel, no shudder).
- Protects seals, gaskets, and other nonferrous components.
- Prevents sludge and varnish formation.
- Resists foaming.
The button makes it easy.
Our Slogan is true. Simply press the button to pour. It's intuitive. This is the easiest gas can to use on th emarket - it's not even close. A gas can should be easy to use.
Don't overfill with Auto Stop.
We used simple physics to develop a nozzle that automatically stops the fuel flow when the target tank is full. Just hold the button down. Simple.
Don't wait so long.
Our patented nozzles flow up to twice as fast as other nozzles. No gurgling or interrupted flow. When filling up large equipment how long do you want to hold a 40 lb. 5 gallon tank?
Don't push around your equipment.
We have the only can that lets you pour gas without touching the target tank. All other current nozzles require pushing against the tank to open their valve. This force can move or roll your equipment. Not good. Remember our valve is controlled by a button.
See what you have.
Double wide view stripes on both the front and back of our smaller cans. Now you know your fuel level from across the yard or garage. No guessing and no extra trips to the gas pump. Every gas can should have view stripes. No-Spill is the only can with them.
Our cans have the thickest skins. A robust 70% thicker than most cans. This costs much more to make, but you get what you pay for.
Three handles on each can. Finger handles on each nozzle, and a finger slot on the bottom of each can (rear handle on the 5 gal.). Your hands share the weight and are in a comfortable position to pour with accuracy. Our design makes it easier to hold. The top handle is for carrying.
- Push-button pour control
- Auto shutoff prevents overfilling
- Extra fast flow rate
- Made of heavy-duty, extra-thick polyethylene for long life
- Wide, stable design is tough to tip over
- 3 handles provide easy pouring
- Large neck opening makes the can easy to fill
- Double-wide front and back view stripes for at-a-glance fuel level assessment