Super Seal is for home and industrial applications to be used with R22, 502 & R410a Systems. It repairs leaks in evaporators, condensors, copper lines and solder joints. This product is an epoxy that reacts to water and air. When coming in contact with the atmosphere, it forms a seal over the leak. If your system stays charged for one day when running, this product will fix most leaks that you may encounter.
If there is air and water in your system, pull a deep vac on the system and boil moisture out of the system.
In most cases, if a system has not leaked below 15 psi, there is typically not air or moisture in the system. The system has greater pressure than what the atmospheric pressure is and cannot leak unless the system is below 15 degrees.
Note: A/C unit must be in operational condition and running before Super Seal can be installed.
- Install the can to the can tap (raise piercing valve so it does NOT pierce can)
- Connect the other end to your A/C unit (low pressure port -- big line)
- Turn on your A/C unit
- Pierce the can. Open the valve slowly with the can upside down. (Valve not included)
- When the can is empty, change the can and continue charging with refrigerant until you reach the manufacturer's pressure specs.
This product cannot go expedited shipping, must go UPS Ground or Freight.
SKU 016872011 Model proseal Weight 1.0000 Color No Size No In Store Only No Price $24.99
All returns must be in their original packaging at which you received it in or they will not be accepted under any circumstance. If you think you have something defective please call us 30 days of receipt of your order.
Write Your Own Review
- Q & A
Questions on Frost Super Seal A/C Leak Repair - 4oz Can
No questions asked yetBack to the product page
Ask Your Own Question