- Reinforced High Stand with Controlled Pin Holes and with Turned Oil Blacked Sliding Posts
- Easy to Use Pin Adjustable Height
- Quality Design and Support Bracing to Sustain Heavy Loads
- Use on 5-piece 25" to 51" with pry bar/bead loosening pockets
- 4-1/4" stroke
- 13.8 ton ram will break the toughest beads
- Used with 10,000 psi air hydraulic pumps
- 10896 Giant Tire Bead Breaker
- 10604 8' Hose
- 10875 5 Quart Plastic Reservoir Pump
- Breaks the most stubborn beads with ease.
- Reduces user fatigue with its spring action design.
- This design prevents slide hammer kick back.
- The wedge foot is forced between the bead and rim flange, delivering blow directly to the tip.
- Heavy duty tool, will not break.
- For use with a variety of rams, presses, and hydraulic tools operating up to 10,000 p.s.i.
- Air pressure 80-145 p.s.i.
- Input port threads 1/4" - 18 and output 3/8" - 18.
- With internal load limiting device.
- Air exhaust muffler for quiet pumping of air motor.
- Air and oil inlet filters for reducing risk of damage from contamination.
- Oil Capacity - 140 cu. in.
- Length - 12.5"
- Width - 7"
- Height - 7.5"
- Quality Built Professional Screw Style Jack Stand
- Screw Style Stand makes it Easy to Hold
- Load at Desired Height and Secure with Locking Collar
- Adjustable Screw for Height Extension and Retraction
- Heavy Duty Design and Application
- Min. Height: 26"
- Max. Height: 46"
- Restore don't replace.
- The best way to fix damaged threads.
- A 30-second solution to an hour-long job.
- Repairs wheel studs, spindles, and standard threaded studs.
- Damaged studs can be renewed in minutes without removing the caliper, rotor, or stud.
- Unique, patented hinged design (instead of two separate halves).
- Every shop needs them.
- Unit comes complete in a plastic carrying case.
- Sizes: 3/4"" - 16"" Right, 3/4"" - 16"" Left, 22 x 1.5mm
The Pneu-Tek Impact Demounter is a revolutionary innovation in tire demounting.
- It is safe, simple, fast and economical, and the most universal tire demounter on the market.
- This unit works as a hand-held tire machine and shines where other tools fall short.
- It can tackle the hard 19.5 reverse hubs and grader tires.
- Can be used on all tires sizes from 10” ATV Tires and up.
- Great for agricultural tires, one piece grader, loader, and back hoe tires.