Only Hi-Lift Jacks are made with a two-piece handle and socket design that is built for extended life. Cheaper imitations use a one-piece design that bends easily if lateral pressure is applied while lifting a load.
Our jacks are designed to help you survive in the most demanding situations – whether you are in the Moab desert canyons, the Welsh Mountains, the Amazon jungle, or the farmlands of Indiana. With a full-range of specially designed accessories, the Hi-Lift jack is just about the most versatile piece of off-roading/farm/auto recovery equipment you can buy.
When it's a heavy-duty situation, the tool had better be a Hi-Lift!
Hi-Lift Jack Specifications
- Approximate weight: 30lbs (14 kg)
- 4,660 lbs (2113.74 kg) rated capacity
- Tested capacity 7,000 lbs.
- Climbing pins of specially processed steel with 125,000 PSI tensile strength and 100,000 PSI yield.
- Steel bar is manufactured of specially rolled extra high carbon steel with 80,000 pound minimum tensile & carbon .69 to .82.
- Steel handle of 14gauge high-yield structural tubing with minimum yield of 55,000 PSI. 1 5/16" diameter x 30" long.
Hi-Lift Jack Features
- Every Jack comes complete with an adjustable top clamp/clevis for use in clamping and winching.
- Safety bolt is designed to shear at 7,000 lbs. (3175 kg)
- For speedy disengaging, lifting unit automatically drops away when load is removed.
- 4 1/2" (11cm) long lifting nose for positive contact with load.
- Steel bar can be reversed for extra long life.
- Low pickup of 4 1/2" (11cm).
- 28 square inch base plate.
- Breaks the most stubborn beads with ease.
- Reduces user fatigue with its spring action design.
- This design prevents slide hammer kick back.
- The wedge foot is forced between the bead and rim flange, delivering blow directly to the tip.
- Heavy duty tool, will not break.
- Loosens tire bead from rim with leverage.
- Excellent for working on tire without removing the wheel from tractor.
- Will handle 38" and 42" 14-ply farm tractor and backhoe tires with drop center rims to small ATV and lawnmower tires.
- Operates with air rachet wrench.
- DO NOT USE AIR IMPACT TOOL.
The Pneu-Tek Impact Demounter is a revolutionary innovation in tire demounting.
- It is safe, simple, fast and economical, and the most universal tire demounter on the market.
- This unit works as a hand-held tire machine and shines where other tools fall short.
- It can tackle the hard 19.5 reverse hubs and grader tires.
- Can be used on all tires sizes from 10” ATV Tires and up.
- Great for agricultural tires, one piece grader, loader, and back hoe tires.
- Newly Designed "Pneumatic" Bead Breaker
- Loosens tire bead from the rim with leverage.
- Excellent for working on the tire without removing the wheel.
- Newly designed hook is reversible to work on a larger rang of rim/flanges.
- Will handle much wider range of tire from automotive tires and up.
- Operates with impact wrench and or air ratchet wrench.
- 5" Stroke
- 35 Ton Air Hydraulic Floor Service Jack
- Tall For Higher Lifting Heights
- Long Handle for easy usage
- Apply to Fast Lifting jobs on Tractors, Farm Transport, and Mining Machinery
- Fast Lifting Speed
- Stable Functioning
- Convenient Usage
- Jack Capacity: 35 Tons
- Air Pressure: 87-130 PSI
- Min. Height: 14.17"
- Hoisting Height: 9.84"
- Extension Height: 0.8" 1.8" 3.94"
- 2 1/4" round patches (20-pack)
- Easy to use
- Removes both top and bottom bead from short side - no need to flip tire/rim.
- Demount all tubeless tires 17.5” thru 24.5” and Super Singles up through 315/22.5” Including most radial and bias ply tires.
- Demounts tire in 8 seconds.
- 90518-100-1 ESC-100
- 90518-200M ESC-200M