Reduce Backup accidents by 70% or more with the Top Dawg wired license plate bracket camera. This wide angle HD backup camera with 4.3” LCD will display to drivers what is behind the vehicle as you go in reverse, which has been proven to reduce backup accidents up to 70% or more. This unit includes license plate camera, which offers easy and NON-permanent installation. License plate camera with 30’ cable includes 9 Infrared LED’s which will improve visibility at night and offers a wide angle HD camera. System includes a 4.3” color LCD that can be powered with car charger or 12 volt power & has additional video input that can be used for DVD players and more. Also includes Heavy Duty flexible windshield mount. This unit is easy to install, takes approximately 20-45 minutes. Also includes a 1 year warranty. This is an ideal product that will help you reduce backup accidents by 70% that is easy to install and operate.
- Reduce backup accidents by 70% or more
- License plate camera – Easy and NON-permanent installation
- Camera is mounted on license plate bracket for no drilling installation
- Includes 9 Infrared LED’s to improve visibility at night
- Wide angle camera will offer wide viewing angle
- Includes a 4.3” LCD that can be powered with car charger or 12 volt power
- LCD has additional video input that can be used for DVD players and more! Anything with a RCA video out
- 30’ Cable connecting camera to LCD
- Monitor with four angle viewing switch (normal, reverse, inverted and inverted reverse)
- Includes Heavy Duty flexible windshield mount
- Easy Install, installs in 20-45 minutes
- License Plate Bracket Camera
- 4.3” TFT LCD screen
- 30' Cable to connect camera directly to LCD
- Instruction manual
- 12 Month Manufacturer’s Defect Warranty
Specifications Display 4.3" TFT LCD Color Monitor (480x234 pixels) LCD Display 16:9, 350:1 Contrast Standard PAL/NTSC Dual-mode Automatic Switching Video 1 Video Input Power <3 W, DC 12V Camera CMOS, 170° Wide Angle View, 420TV Lines of Resolution Effective Pixels Camera PAL 720H x 480V IR Lights Includes 9 IR Lights for Improved Night Recording Cable Length 30 ft. Cable to Connect Camera Directly to LCD Part Number MS356LP
This 12v Cigarette Lighter Adapter Harness is perfect for temporary lighting applications. The cable is 15 Feet long and It has a 12v automotive cigarette lighter adapter on one end and two Deutsch plugs on the other that allow for use with one or two LED lights.
- Cigarette Lighter Adapter
- Dual Deutsch Plugs
Pick-up truck covers protect your pick-up truck from the elements. Insures maximum breathability to prevent mold and mildew. Triple layer SFS Aqua-Shed® beads water on contact affording maximum resistance to high humidity and rainfall in addition to protection against UV rays. Strap and buckle attachments and bunny-ear cinching system allows for a custom look. Reinforced, elasticized corners resist tears and snags. Includes storage bag for easy stowing of cover when not in use.
- SFS Aqua-shed beads water on contact
- 100% Breathable
- Elasticized front and rear corners for snug fit
Sizing Part # Cover Size Truck Model Length 12270 Small Small to Midsize Pick-ups 218" 12284 Medium Short Bed (Extended or Crew) 252" 12280 Large Long Bed (Extended or Crew) 270"
Tragically, on average, two children are killed each week and approximately 50 people are hospitalized after being hit by vehicles backing up. Since 2001, about 600 children have died in these non-traffic related, rollover incidents. Drivers cannot see the children and other pedestrians behind them because their “blind zone” inhibits rearward visibility. The blind zone, which can actually be 34 feet or more in length on light trucks and larger sport utility vehicles, can hide as many as 60 children from the driver’s view.
For these reasons, PEAK Performance is proud to introduce its new PEAK Performance Back-Up Camera System. This accessory works on most kinds of vehicles and features a full 2.4-inch by 3.5-inch LCD color monitor that provides easy-to-see rear coverage on automobiles, trucks, SUVs and minivans. It also includes a water-resistant color camera and a 2.4GHz wireless transmission between the camera and the display monitor. The automatic screen turns on upon shifting into reverse gear. The complete installation takes less than an hour for most novices and just minutes for those with a little bit more expertise.
The camera mounts above the rear license plate using the same mounting holes as the plate, while the LCD monitor mounts to the inside front windshield with an easily removable suction cup mechanism. Once mounted, the monitor itself easily pivots on two axes for the driver’s viewing adjustment.
The rear image is wirelessly transmitted from the camera above the license plate to the monitor on the front windshield via a 2.4GHz transmitter. Image transmission will only take place after the rear camera and transmitter are wired to the rear backup light circuitry. The LCD monitor, powered by 12 volts, plugs into the vehicle’s lighter or power adapter outlet. The brightness and contrast control on the monitor can be adjusted, the image orientation controlled and the LCD screen turned off, all from the driver’s seat.
More than 50 percent of households have one child or more. Approximately 65 percent of all drivers fall between the age of 18 to 45, a very likely range for parents with small children. More than 40 percent of drivers own a minivan, SUV or pickup truck that can have blind spots that can exceed 34 feet, and more than 50 percent of the top 20-selling vehicles in the United States do have blind spots greater than 30 feet.
- Wireless Camera broadcast for quick and easy installation.
- Brightness and contrast controls
- Reverse Image control
- Water resistant camera with day or night time use.
- 3.5" Color LCD Monitor
With the Armor 400 car cover you can protect your car in areas of high sun exporsure, rain or snow.
- 4 layers
- Mirror pockets
- UV resistant
- 100% breathable
- Water repellent
- Elasticized for a snug fit
- To prevent wind loss
- Grommets for security cable (cable not included)
- Storage bag
**See the fit guide in the mannual tab.
Sizing Part # Size Length 31004 A Up to 13' 4" 31005 B 13' 5" - 14' 2" 31006 C 14' 3" to 15' 31007 D 15' 1" to 16' 31008 E 16' 1" to 17' 6" 31009 F 17' 7" to 18'9"
The Rigid Industries Adjustable Bar Mount Kit includes two (2) adjustable mounts; one for each end of one of Rigid's light bars. These mounts are extremely versatile, allowing for up to 1" of adjustment to position your light exactly where you need it. Made in the USA from light weight black anodized billet aluminum.
- 2.500" Tubing
- Billet Aluminum Construction
- Universal Bar Mount
- Made in the USA!
To accommodate Rigid Industries' SR-M Series, SR-Q Series and D-Series LED Lights, Rigid Offers 17 different custom RAM mounting systems. You may choose from three different surface attachment methods: Suction Cup, Flat Surface Bolt-Down or a Pole Clamp. You can choose from three different arm lengths: short, medium, or long. You can also choose a single light attachment point or a plate for mounting multiple lights. RAM Mount's ball and joint design allows for a full 360° rotation. RAM Mounts are extremely durable (supports up to 5 lbs in a rugged environment), all stainless steel hardware, provide maximum adjustability and are backed by RAM Mounts' lifetime warranty.
This mount features an adjustable 2"-3" diameter bar clamp base. The base holds a 1" diameter ball which connects to a 3.69" long arm. At the end of the arm is another 1" diameter ball which connects to a small light mounting tab. Great for mounting a SRM, SRQ or D-Series light on a 2"-3" diameter pole with maximum adjustability.
All 1" ball connections can be interchanged between arms for total customization.
RAM Mounts pair well with Rigid's 15' wiring harness with 12V adapter plug
RAM Mounts are a perfect fit for many vehicles: Bikes, UTVs, ATVs, Snow mobiles, Sleds, Public Safety etc.
*********LIGHTS NOT INCLUDED*********Learn More
This 7.5' wiring harness is designed to connect a single Hi/Lo LED light to your 12V electrical system. It features battery terminals on one end and a Deutsch connector on the other to connect to the light. It incorporates an inline fuse holder and a waterproof switch. This harness is compatible with the following Rigid Industries LED Lights: D2 H/L (Single), 4'-10" E2 H/L, 6" &10" SR2 H/L and SRQ2 H/L.
- This part is required to install your Weatherguard Protect-A-Rail Cab Protector solidly to your truck bed.
- New style mounting bracket requires only one hole in the front rail and two holes in the side rail of the truck bed.
- Fits: 1999 and newer Super Duty F-250/F-350 and 1996 and older F-150/F-250/F-350
The all-new 2010-2014 Kawasaki Teryx® Grille Mount Kit - This Grille Mounts (1) one 10" SR-Series or SR2-Series (Lights sold separately) in between the slats of the front grille. Stainless steel construction with durable powder coat. This isn’t for everyone, and it doesn't pretend to be. Kawasaki’s most exclusive two-seat Side x Side now can be equipped with Rigid Industries Rugged Stylized LED Grille! That make the Teryx line the strongest and most reliable, and now most stylish and rugged Side x Sides money can buy!
- Made for 2010-2014 Kawasaki Teryx
- Stainless Steel Construction
- Durable Powder Coat
- Mounts (1) 10" SR-Series or SR2-Series
**************LIGHTS SOLD SEPARATELY****************Learn More