$59.99The Voltek 24 LED Amber Light Bar is a great way to be noticed and stand out while on the road!Product Features:
- Working Voltage: DC 12V
- Current: 2 amps
- Power: 240 LED
- Light Source:LED
- 8 Flash Patterns
- Lamp Color Available: Amber
- Cover Color: Clear
- On/Off switch
- 10 Foot Cable
- Strong Magnet
- Length - 11 Inches
- Width - 6.5 Inches
- Height - 2.5 Inches
- 4 inches wide x 30 feet long durable webbed strap
- Features a sewn end loop with an overlay of high-tenacity nylon to ensure longer life in the pull area
- Sewn in loop also makes it easier to attach the strap loop to the tow hooks on the vehicle
- 35,000 pounds breaking strength
- 17,500 pounds maximum vehicle weight
Tragically, on average, two children are killed each week and approximately 50 people are hospitalized after being hit by vehicles backing up. Since 2001, about 600 children have died in these non-traffic related, rollover incidents. Drivers cannot see the children and other pedestrians behind them because their “blind zone” inhibits rearward visibility. The blind zone, which can actually be 34 feet or more in length on light trucks and larger sport utility vehicles, can hide as many as 60 children from the driver’s view.
For these reasons, PEAK Performance is proud to introduce its new PEAK Performance Back-Up Camera System. This accessory works on most kinds of vehicles and features a full 2.4-inch by 3.5-inch LCD color monitor that provides easy-to-see rear coverage on automobiles, trucks, SUVs and minivans. It also includes a water-resistant color camera and a 2.4GHz wireless transmission between the camera and the display monitor. The automatic screen turns on upon shifting into reverse gear. The complete installation takes less than an hour for most novices and just minutes for those with a little bit more expertise.
The camera mounts above the rear license plate using the same mounting holes as the plate, while the LCD monitor mounts to the inside front windshield with an easily removable suction cup mechanism. Once mounted, the monitor itself easily pivots on two axes for the driver’s viewing adjustment.
The rear image is wirelessly transmitted from the camera above the license plate to the monitor on the front windshield via a 2.4GHz transmitter. Image transmission will only take place after the rear camera and transmitter are wired to the rear backup light circuitry. The LCD monitor, powered by 12 volts, plugs into the vehicle’s lighter or power adapter outlet. The brightness and contrast control on the monitor can be adjusted, the image orientation controlled and the LCD screen turned off, all from the driver’s seat.
More than 50 percent of households have one child or more. Approximately 65 percent of all drivers fall between the age of 18 to 45, a very likely range for parents with small children. More than 40 percent of drivers own a minivan, SUV or pickup truck that can have blind spots that can exceed 34 feet, and more than 50 percent of the top 20-selling vehicles in the United States do have blind spots greater than 30 feet.
- Wireless Camera broadcast for quick and easy installation.
- Brightness and contrast controls
- Reverse Image control
- Water resistant camera with day or night time use.
- 3.5" Color LCD Monitor
- This part is required to install your Weatherguard Protect-A-Rail Cab Protector solidly to your truck bed.
- New style mounting bracket requires only one hole in the front rail and two holes in the side rail of the truck bed.
- Fits: 1999 and newer Super Duty F-250/F-350 and 1996 and older F-150/F-250/F-350
This cargo carrier is the perfect addition to any road trip. When the car starts to get full, strap the cooler, luggage, stroller, whatever you may have to this cargo carrier and make more space inside your vehicle. This carrier attaches easily through a 2" receiver on your car and makes connecting and disconnecting a snap.
- Ultra light aluminum
- 500 lb. maximum capacity
- Attaches easily to your vehicle
Dimensions: 9.5" H x 49.5" W x 22.5" DLearn More
This Better Built truck box provides, secure, organized storage for small parts and is designed to fit either in front or behind wheel well.
H: 18"Learn More
Bumper mount kit for the 2014 Toyota Tundra. Mounts one of any Rigid 30" SR-Series or SR2-Series LED lights neatly. Stainless steel construction with durable powder coat. Some cutting of plastic required. Professional Installation Recommended.
- Fits 2014 Toyota Tundra
- Works with any Rigid 30" SR-Series or SR2-Series LED light
- Black Finish
- Stainless Steel Construction
- Durable Powder Coat
*************LIGHT NOT INCLUDED*************Learn More
A-Series LED Accessory Light might be small, but it packs a punch. Available in two options, high or low power, the A-Series is extremely versatile. Whether it's used as a dome light in your truck, a deck light on your boat, or driving lights on your trailer, the A-Series is the perfect accent light for any application! The A-Series accent lighting solution includes multiple mounting options and is available in multiple LED colors - red, blue, green, and three shades of white - to suit your needs.
- 50,000+ Hr LED Lifespan
- Instant On / Off - No Warm Up
- Durable Polycarbonate Lens
- Billet Aluminum Housing
- Designed, Engineered & Assembled in the USA
LED Colors Available:
- Warm White
- Cool White
Watts 4W Amp Draw 0.3A LED's 3 Raw Lumens 400 Operating Temperature -40°F to 140°F Mount Type Surface Finish Color Black Optics High Power Family A-Series
The Classic Accessories PolyPro 3 SUV/Truck Cover, provides a triple layer, heavy duty protection again dirt, scratches, and bad weather.
- Soft fabric won't scratch paint
- Elasticized bottom hem for a fast, custom fit
- Zippered driver’s side door for easy access
- Non-scratch tie-down grommets and rope
- Antenna reinforcement patch
- Perfect for storage and moderate UV and weather protection
- Rugged PolyPro™ 3 fabric resists and repels rain and snow with superior protection against dirt, pollution and scratches
- Protects against dirt, scratches and harmful UV rays
- Storage bag included
- 3 Year Manufacturer Warranty
Sizing Guide Size Compact Full-Size Fits SUV/Truck up to 187 inches long SUV/Truck 188 - 230 inches long Example Ford Escape, Ford Ranger, etc. Chevy Suburban, Ford F150, etc. Stock Number 10-018-241001-00 10-019-261001-00
Rigid's 2012 Toyota Tacoma Fog Light Replacement Kit allows you to mount SRM-Series LED lights (not included) in your Tacoma's OEM fog lamp locations. This kit gives your SRM-Series lights a clean, from-the-factory look without having to drill or cut into your bumper. Made from high quality stainless steel, these adaptor plates are powder-coated black for a long-lasting finish. This kit comes with everything you need to install SRM-Series lights in both fog light locations and is backed by Rigid Industries' limited lifetime warranty.
- Stainless Steel Construction
- Black Powder Coat Finish
- Includes All Necessary Hardware
- Limited Lifetime Warranty
- Made in the USA!
Kit Fits the Following Models:
- 2014 Toyota Tundra
- 2012-2013 Toyota Tacoma
***************LIGHTS NOT INCLUDED*******************