The Voltek LED Trailer Light Kit, manufacturer number TLKLED includes:
- (2) LED Stop / Tail / Turn Lights
- (2) LED Amber Side Marker Lights
- 22 Feet of "Y" Split 4 - Way Flat Harness
- 4 Feet Long - 4 Flat Vehicle Connector
- Corrosion Resistant License Plate Holder
- Wire Clips and Splice Connectors
- 2 inches wide molded rubber handles make tightening easy on hands
- High performance, easy and secure ratcheting system
- Heavy vinyl coated hooks prevent scratching
- Contains two 2 inches wide by 10 feet long, yellow webbed, durable straps
- 4000 pounds load capacity and 1333 pounds WLL (Working Load Limit)
Conveniently mount and lock your Hi-Lift jack to the bedrail of your pickup! Installation is simple. It can be mounted horizontally or vertically, with or without a Jack Protector. Your Hi-Lift Jack is mounted in an easy to reach location and is locked to deter theft. Designed to fit the bedrail of most pickups.
Loc-Rac Kit Contains:
- 2 mounting brackets
- A padlock
- All necessary mounting hardware
- 3 inches wide x 30 feet long durable webbed strap
- Features a sewn end loop with an overlay of high-tenacity nylon to ensure longer life in the pull area
- Sewn in loop also makes it easier to attach the strap loop to the tow hooks on the vehicle
- 27,000 pounds breaking strength
- 13,500 pounds maximum vehicle weight
- Re-tractable ratcheting system is simple and smart
- Unused web is stored in center so it does not flap in wind or gets dirty
- Heavy vinyl coated hooks prevent scratching
- 2 inches wide by 10 feet long, black webbed, durable straps
- 3300 pounds load capacity and 1100 pounds WLL (Working Load Limit)
This installation bracket is specifically designed to mount Rigid's 20" E-Series or SR-Series LED Light Bar (not included) in your Raptor's lower grille cavity. Simply remove the 5 screws holding your OEM grille in place and install the bracket using the existing mounting points. Made from stainless steel, this cradle mount features a durable black powder coat finish and is backed by Rigid Industries' limited lifetime warranty.
- Aggressive Rigid Styling
- Stainless Steel Construction
- Black Powder Coat Finish
- Includes All Necessary Hardware
- Limited Lifetime Warranty
- Made in the USA!
Applications Ford F-150 SVT Raptor 2010-2014 Finish Color Black
********************LIGHTS NOT INCLUDED***********************Learn More
Lift directly from the wheel... Plastic bumpers and extreme lift-kits are no longer a problem!
Many trucks and SUV's have larger tires and/or lift kits that require extensive lifting height ability from the bumper jack. The Lift-Mate is designed to operate in a manner that allows the vehicle wheel to be lifted directly from the wheel, greatly reducing the amount of travel up the jack bar needed to lift the wheel in an adequate and safe height.
Lift-Mate Features & Specifications:
- Lift Capacity: 5000 lbs. (2273 kg)
- Rubber-Coated hooks to protect the wheel
- Rubber pad for protecting the tire and wheel
*JACK NOT INCLUDED*Learn More
- Size: 5 lbs - Dimensions: 16.07" H X 4.5" Diameter
- Model Number: FX340GW - UL Rating: 3-A, 40-B:C
- Effective Against Class: ABC - Discharge Time: 13 to 15 sec
- Discharge Range: 12 to 18 ft - Operating Pressure: 195 PSI
- Expellant: Monoammonium Phosphate - Cylinder Material: Seamless Aluminum
- Converts a 2" x 8' board into a ramp for a inexpensive solution into loading your small vehicles.
- Kit includes ramp plates, nuts, carriage bolts, and washers. - Wood not Included
- Kit includes 2 ramp Plates
To accommodate Rigid Industries' SR-M Series, SR-Q Series and D-Series LED Lights, Rigid Offers 17 different custom RAM mounting systems. You may choose from three different surface attachment methods: Suction Cup, Flat Surface Bolt-Down or a Pole Clamp. You can choose from three different arm lengths: short, medium, or long. You can also choose a single light attachment point or a plate for mounting multiple lights. RAM Mount's ball and joint design allows for a full 360° rotation. RAM Mounts are extremely durable (supports up to 5 lbs in a rugged environment), all stainless steel hardware, provide maximum adjustability and are backed by RAM Mounts' lifetime warranty.
This mount features a 2.5" diameter round base with 7 bolt holes. The base holds a 1" diameter ball which connects to a 2.38" long arm. At the end of the arm is another 1" diameter ball which connects to a small light mounting tab. Great for permanently mounting a SRM, SRQ or D-Series light on a flat surface with maximum adjustability.
All 1" ball connections can be interchanged between arms for total customization.
RAM Mounts pair well with Rigid's 15' wiring harness with 12V adapter plug
RAM Mounts are a perfect fit for many vehicles: Bikes, UTVs, ATVs, Snow mobiles, Sleds, Public Safety etc.
************LIGHTS NOT INCLUDED**************Learn More