Regular Price: $59.99
Special Price: $49.99
Imagine you are helping plow the roads in your town on a dark winter evening. It is already very difficult to see due to the harsh weather conditions. Making sure that you are able to be seen in your truck is to the utmost importance. With Rural King's LED light bar, you can make sure all incoming traffic and pedestrians can easily see that you are coming. Not only will you be noticed, but you will stand out, making it impossible for someone to miss you. There are 7 flash patterns that you can choose from and the light bar comes with a DC 12V adapter so you can plug it right into your cigarette lighter port in your truck. The LED light bar is incredibly easy to install too! With 2 magnets attached to the bottom of the light bar, just set it on top of your truck and it will remain in place. So get yourself a LED light bar today and start being seen! Product features are as follows:Product Features:
- Working Voltage: DC 12V
- Current: 3 amps
- Light Source:LED
- 7 Flash Patterns - Can Be Changed Manually
- Lamp Color Available: Amber
- Cover Color: Clear
- On/Off switch
- 9 1/2' Cable
- 2 Magnet Standers
- Headlight Material: PMMA
- Length - 11 Inches
- Width - 6.5 Inches
- Height - 2.5 Inches
Upgrade your trailer with the Voltek LED Standard Trailer Light Kit. LED lights last 30 to 40 times longer than standard incandescent lights and use less battery power, lengthening your battery's life. This kit has 28 total LED bulbs for high visibility and travel safety.
The Voltek kit includes the following: - 2 LED Class A style Stop / Tail / Turn Lights with 12 LED bulbs each and large 4 9/16x 4 9/16 inch lenses. - 2 LED amber side marker lights with 4 LED bulbs each. - 22 feet of "Y" split 4-way color coded wiring harness. - 4 feet long 4-pin flat vehicle connector and color coded trunk harness. - Corrosion Resistant License Plate Holder and housing. - Wire clips and splice connectors included for easy assembly and installation.
This Voltek trailer light kit is suitable for use on trailers up to 80 inches wide (6 2/3 feet.) It complies with DOT standards and meets federal vehicle safety requirements. An adapter (sold separately) will be required for use with 7-pin connectors.Learn More
*** WARNING*** TO ASSURE A GOOD FIT, MEASURE ROOF LENGTH, NOT THE LENGTH OF THE R.V.Learn More
- Fit’s Class A, Class C, Travel Trailer, Toyhauler and 5th Wheel
- Covers Only the RV’s Roof
- Weighs a Fraction of What Full Size RV Covers Weigh (10 to 15lbs)
- Easy to Install
- Helps Eliminate Black-streaks and Protects Roof from Environmental Damage
- Attaches Using ADCO’s Patent-Pending Wheel Anchor System that Prevents Straps from Contacting RV Side-Walls
- Constructed Using DuPont Tyvek® for Maximum Durability and UV Resistance
- Water Resistant Yet Breathable
- Designed to Accommodate Roof-Top Accessories (Such as A/C, Satellite Dish, Horns, etc.)
- Includes Storage Bag
- 2 Year Warranty
Sometimes, when you are planning a road trip, you don't want to hassle with limited space in your vehicle. With everyone bringing all of their stuff, the vehicle can fill up quickly. Well, don't worry about that this time. Get a cargo carrier from Rural King, strap it to your vehicle, and save room. The cargo carrier easily attaches to the 2" receiver on your vehicle, so don't worry about it being difficult to install. It is very light, made from lightweight aluminum, so it won't drag on your vehicle. We find that the cargo carriers come in handy for bulky supplies such as coolers, suitcases, baby strollers, or whatever large item you plan on bringing. Not only is it tough to find enough room in your vehicle, but if you manage fit all of it, everyone is crammed in like sardines. Long road trips can stress people out but alleviate the stress while adding elbow room by using the aluminum cargo carrier!
- Ultra light aluminum
- 500 lb. maximum capacity
- Attaches easily to your vehicle
Dimensions: 9.5" H x 49.5" W x 22.5" DLearn More
Keep your spare tire looking brand new and protected on your RV, with the Adco Product Tire Cover! Heavy duty flannel-backed vinyl repels liquid and saves spare tires from the sun’s damaging U.V. rays and other environmental hazards. All this while dressing up the rear end of your vehicle.
- Elasticized back allows for a tailored fit
- Extends the life of your spare tire
- Weather proof seams
Square LED clearance or side marker light with reflector. Reflectorized lens eliminates the need for a separate reflector to meet DOT requirements. Features screw-on, replaceable lens. Stud mount black base. All-weather molded plastic housing and durable lens protect against corrosion. Design includes both lead and ground wires for mounting to all surfaces.Learn More
Gain Privacy and sun protection for your Pick-up Truck, SUV or Class C Motorhome. Extra heavy-duty vinyl snooze bonnet covers windshield and side windows. Magnetic fasteners for easy on/off with anti-theft tabs. No snaps, no screws, no drilling. Includes storage pouch.
- Standard white in color
- Easy to use
- 3 year manufacturer warranty
Block the sun from penetrating your Class A windshield. One size fit's almost every Class A windshield with no drilling necessary. This is a must-have product for anyone who camps in the sun. While drapes and folding windshield reflectors prevent light from entering the windshield, this product stops the heat, eliminating the greenhouse effect. Plus, it prevents dashboards and curtains from fading in the sunlight. A cheaper, easier alternative to custom-fit windshield covers that will not leave your coach full of drilled holes.
- Constructed using patented Tyvek® RV™ fabric by DuPont™.
- Patent pending design secures in minutes with no need for drilling.
- Quick-connect buckles attach at 3 contact points: mirrors (bottom & top mounted models) and any accessory on the RV roof.
- Decreases need for A/C usage while camping.
- Includes storage bag.
- 2 year manufacturer warranty.
- 140" W at the top; 102" W at bottom
- Height: 70"
Combination stop/turn/tail with back-up light with white base. RVST56 includes license plate illuminator and mounting bracket. Features snap-on lens and easy to change replaceable bulb. All-weather molded plastic housing and durable lens protect against corrosion. Ground wire.Learn More