The Cargo Lock Kit is a triangle tie down accessory specially made for Quantum Rack. The self-racheting handle provides easy installation with no additional tools, bolts, or hardware needed. The piece comes apart at the bracket area, so it can easily be installed on the inside or the outside of the Versa Rack uprights and can slide along the top rails for versatility.Learn More
The button makes it easy.
Our Slogan is true. Simply press the button to pour. It's intuitive. This is the easiest gas can to use on th emarket - it's not even close. A gas can should be easy to use.
Don't overfill with Auto Stop.
We used simple physics to develop a nozzle that automatically stops the fuel flow when the target tank is full. Just hold the button down. Simple.
Don't wait so long.
Our patented nozzles flow up to twice as fast as other nozzles. No gurgling or interrupted flow. When filling up large equipment how long do you want to hold a 40 lb. 5 gallon tank?
Don't push around your equipment.
We have the only can that lets you pour gas without touching the target tank. All other current nozzles require pushing against the tank to open their valve. This force can move or roll your equipment. Not good. Remember our valve is controlled by a button.
See what you have.
Double wide view stripes on both the front and back of our smaller cans. Now you know your fuel level from across the yard or garage. No guessing and no extra trips to the gas pump. Every gas can should have view stripes. No-Spill is the only can with them.
Our cans have the thickest skins. A robust 70% thicker than most cans. This costs much more to make, but you get what you pay for.
Three handles on each can. Finger handles on each nozzle, and a finger slot on the bottom of each can (rear handle on the 5 gal.). Your hands share the weight and are in a comfortable position to pour with accuracy. Our design makes it easier to hold. The top handle is for carrying.
- Push-button pour control
- Auto shutoff prevents overfilling
- Extra fast flow rate
- Made of heavy-duty, extra-thick polyethylene for long life
- Wide, stable design is tough to tip over
- 3 handles provide easy pouring
- Large neck opening makes the can easy to fill
- Double-wide front and back view stripes for at-a-glance fuel level assessment
Give your F-150 Raptor even more aggressive styling and the best and brightest LED lights in the industry. This kit includes two stainless steel brackets and a wire harness extension that allow you to easily install a 40" E-Series or SR-Series LED Light Bar (not included) behind the upper grille of your Raptor. It uses existing mounting points and hardware on each side of the frame assembly behind the upper grille. This kit is backed by Rigid Industries' limited lifetime warranty.
- For Ford F-150 SVT Raptor 2010-2014
- Aggressive Rigid Styling
- Stainless Steel Construction
- Black Powder Coat Finish
- Includes All Necessary Hardware
- Limited Lifetime Warranty
- Made in the USA!
************LIGHTS NOT INCLUDED************
- Cleat Tie Down Kit - 29212063
- Cleat Tie Downs provide a durable mounting and/or tie down surface for ropes or bungee cords
- Mount easily on the outside of any truck toolbox
- Kit includes two cleats, mounting hardware, and full installation instructions
- Weight: Approximately 1 pounds
- Shipping Dimensions: Approximately 7 x 6.75 x 2 inches.Learn More
Dee Zee Bull Bar Guard - License Plate Mount. Bull bars can block the license plate on some vehicles, use this bracket to move your license plate to a visible location.
- License Plate Frame Mount
- Attach A License Plate To Your Dee Zee Bull Bar
- Made From 2.5mm Hot Rolled Steel
- Protective Gloss Black Powder Coat Finish
- Mounts To Underside Of The Center Tube
- Uses 6mm Threaded Inserts
The L.E.D. Lights Strip is the newest technology in truck toolbox interior lighting. It is a battery powered strip of 3 high-powered, long-lasting, super-bright L.E.D. lights. The back side of the battery pack and the strip have double-sided tape allowing the piece to be mounted anywhere inside your truck toolbox easily. Length: 36inches Requires 4 AA Batteries (Not Included)Learn More
Truck Box Leveling Kit provides a way to mount your truck toolbox when the Better Built Truck Rack is installed on your truck. This piece simply creates a mounting surface on the bed rails of your truck that is level with the already installed Versa Rack base mounts.The set comes with 2 (two) mounting base pieces and 4 (four) mounting clamps for easy no-drill mounting.Learn More
Made of durable plastic, the 5 pocket tray is great for keeping small items organized and easily accessible. It even fits most major brands of truck boxes.Learn More
Conveniently mount and lock your Hi-Lift jack to the bedrail of your pickup! Installation is simple. It can be mounted horizontally or vertically, with or without a Jack Protector. Your Hi-Lift Jack is mounted in an easy to reach location and is locked to deter theft. Designed to fit the bedrail of most pickups.
Loc-Rac Kit Contains:
- 2 mounting brackets
- A padlock
- All necessary mounting hardware