Self-priming centrifugal, glass reinforced Noryl construction, stainless steel internal and external fasteners, EPDM O-rings, integral Noryl shaft sleeve, dual 1-1/2" female and 2" male threaded suction and discharge connections, built-in polypropylene basket strainer, close-coupled to an electric motor, mounted on polypropylene baseplate.
THREE PHASE 230/460 VOLT, 3450 RPM, TEFC Curve Port Size Req'd HP Volt Model A 1-1/2" / 2" 0.5 1 GNOK 1-1/2/2AL D.5C B 1-1/2" / 2" 0.75 1 GNOK 1-1/2/2BL D.75C C 1-1/2" / 2" 1 1 GNOK 1-1/2/2CL D1.0C D 1-1/2" / 2" 1.5 1 GNOK 1-1/2/2DL D1.5C E 1-1/2" / 2" 2 1 GNOK 1-1/2/2EL D2.0C
- For use in exterior and interior applications
- Holds up to 300 lbs.
- Made of Steel
- Zinc Plated Finish
- Size: 1/2" x 6"
Do NOT use for overhead lifting, support of human weight, athletic or playground equipment. When safety is involved, CONSULT MANUFACTURER. Inspect frequently!Learn More
- Ropes are hand spliced for added strength
- Absorbs shocks
- Easy to use and store
- 1/3 weight of chain and safer
- Can be stored wet, won't rot
- Finished length: 16'
- Tensile strength: 25,000 lbs.
Dee Zee NXc Running Board Steps (brackets) - Get a step up into your vehicle while adding styling and protection. Custom fit brackets work with any of the three styles of NXc Running Boards (sold separately). Heavy-duty steel braces are protected by our NRT powder coat application. NRT (No Rust Technology) is a specially developed coating that increases corrosion protection. Brackets and bolts for one complete installation come bundled together. No drilling is required on these vehicle specific mounts.
- NXc Mounting Brace
- Required To Mount NXc Running Boards
- NRT Powder Coat Is A Specially Designed To Increase Corrosion Protection
- No Drill Installation
- Custom Fit Application Ensures Quick And Easy Installation
- Running Boards Not Included
- Made In USA
- Limited-Lifetime Warranty
These Standard Duty Lockers have 22-gauge doors with vent holes and a die cast handle that secures the door in a closed position and accommodates a standard padlock. All compartments have 2 side hooks and a flat bottom.
- Dimensions: 15” W x 18” D x 66” H
- Welded steel construction
- Powder coat finish
- Shipped assembled (Handle requires some assembly)
- General purpose bracket for mounting shelves
- Embossed design for extra strength
- Punches for #7 wood screws
- Made of Steel
- Zinc Plated Finish
- Size: 8" x 10"
The 6210 Fiberglass 10 ft Step Stool is ideal for the homeowner or the professional. With a duty rating of 300 pounds, it features a HolsterTop with the Lock-In System to secure tools from falling while keeping them right at hand. The ladder offers a full set of rear horizontals and heavy duty internal spreaders. All steps are knee braced and the foot pads are riveted to the EDGE® structure. The EDGE bracing system helps protect the rail from damage. Each TRACTION-TRED® step is slip resistant and double riveted. Fiberglass rails are non-conductive for working near electricity.
- HolsterTop with Lock-In System secures tools to increase productivity
- Shoulder bolt and nut on top hinge
- 4 rivets attach top to each front rail
- Double riveted slip-resistant TRACTION-TRED® steps
- Back-up plates reinforce all top connectors
- Heavy duty internal spreaders
- Full set of rear horizontals spaced one per foot
- All steps and two rear horizontals are knee-braced
- Slip-resistant foot pads attached to the EDGE® structure
- Every rivet backed up by metal, metal plates or washers to protect rails
- Optional manual pail shelf kit, model no. PK76-9 or automatic closing pail shelf kit model no. 76-2
- 300 Pound Load Capacity
- Light weight and non-conductive
- Non-corrosive and impact resistant
- High insulative value reduces sweating
- Smooth surface reduces mineral build-up on surface
- Schedule 40 PVC, for use with cold water irragation and sprinkler systems
- PVC pressure fittings conform to ASTM D-2466
- Size: 1-1/4"