- Totally enclosed, energy efficient, PSC motor
- Fan head tilts 180 degrees
- 3-speed pull chain
- Rugged hanging bar
- Powder-coated steel construction
- OSHA compliant grilles
- 10 ft. grounded 3-prong power cord
- Great for indoor or outdoor use
Replacement blower motor, 120 volts, 60 Hz, 1620 RPM, 300 Watts, 2.6 Amps. and 1/15 HP/ 8.75lbs. Replace part number 80496. For units: 1300, 1303, 1321, 1400, 1500, 1537, 1537G, 1557M, 6100, 6220, 30A, 22AF, 24A.
- 120 volts, 60 Hz, 1620 RPM, 300 Watts, 2.6 Amps. and 1/15 HP/ 8.75lbs.
- Replaces part number 80496
- Replaces part number 80230
- For units 1300, 1303, 1321, 1400, 1500, 1537, 1537G, 1557M, 6100, 6220, 30A, 22AF, 24A.
- Size of Outlet Hole: 8" W x 3.75" H
Replacement wood and coal furnace shaker grate, part number 40257. For units: 1300, 1500, 1537, 1557M, & 22AF.
This shaker grate works as both the front and back grate.
**Some models require two grates, check with your owner's manual.**
Dimensions: 11 5/8” x 5/8”Learn More
The pump is an on demand pump that stops when the pressure reaches 60 psi or so. When the pressure drops below 60 the pump turns on. Pump and motor stop instantly when discharge is closed. Diaphragm design eliminates troublesome shaft seal. Pump can be run dry without damage. Ball bearing drive assures longer pump life. Excellent self-priming capability. Santoprene diaphragms and viton valves are standard. Maximum temperature of pumped liquid is 130°F (55°C). Permanent magnet motor and longer life brushes.
- 12 Volt Diaphragm Pump
- 2.1 GPM
- 60 psi max pressure
- 8 Amp Draw
- Each pump has an internal fan which cools the pump during operations by up to 50%
- Upgraded pressure switch for longer life
- Motor windings have been increased to help dissipate heat
- Ready for Round-up
- Flow (GPH) - 9,000
- Max. PSI - 44
- Engine - Briggs & Stratton
- Engine Type - OHV
- Engine Displacement (cc) - 127
- Engine Speed (RPM) - 3,600
- Suction Port (in.) - 2
- Discharge Port (in.) - 2
- Max. Suction Lift (ft.) - 25
- Max. Total Head (ft.) - 100
- Self-Priming - Yes
- Solid Handling (in.) - 1/8
- Pump Housing - Glass-filled polyester
- Check Valve - EPDM rubber
- Seals - EPDM
- Impellers - Glass-filled polyester
- Volute - Glass-filled polyester
- Max. Fluid Temp. (deg.) - 200
- Start Type - Recoil
- Fuel Capacity (gal.) - 0.52
- Run Time - 45min. - 1hr.
- Low Oil Shutdown - No
- Dimensions L x W x H (in.) - 21 x 17 x 15
- Manufacturer Warranty - NTE 1 year RA/Exchange Policy
- hip Weight - 44.0 lbs