- Pumps Up To 4200 GPH @ 0'
- Durable, Cast-Iron Submersible Sump Pump
- Vertical Float Switch For Automatic Operation
- Top Suction Design Filters Debris and Minimizes Clogging
- Designed For Easy Installation Without Any Plumbing Changes
- Epoxy-Coated Steel, High Performance 1/2 HP Motor
- 1-1/2" NPT Discharge and Durable Cast-Iron Base
- Float Guard Protects Switch From Hang-Ups
- Designed For 11” Diameter Or Larger Sump Basins
- Approximate On Level @ 9” - Off Level @ 4”
Starting off square and level is essential to a successful shed assembly and we recommend that you consider a base kit to self-square the shed and help level the site. Base kits are available for the majority of Arrow sheds. The base kit must be assembled with your selected floor finishing option before you start to build your shed. Use the flooring material that best suits your needs, such as wood, patio blocks, or gravel. The base kit may also be used as a form for pouring concrete.
- Made of durable hot-dipped electro-galvanized steel
- Keeps building and stored items off the ground
- Easy to install
- Includes all hardware
- Does not include floor all finishing materials (If finishing with wood flooring, use exterior-grade plywood, measured to base kit dimensions)
Fits Arrow shed sizes:
- 8' x 8'
- 10' x 8'
- 10' x 9'
- 23,000 BTU Kerosene Heater
- Heats an area up to 1000 sq. feet
- Heats 20'x45' room
- Operates 12 hours on one filling
- 99.9% fuel efficient
- Requires no electricity to operate
- Automatic ignition shut off Shuts heater off if knocked over
- 9-12 hours of continuous output
- Siphon pump and batteries included
- Conveinient fuel gauge lets you monitor level
- Fuel Capacity: 1.9 gallons
Innovative patent-pending ShelterLogic Firewood Seasoning Shed is designed to create burnable wood fast — twice as fast as open air drying. Seasons wood for indoor fireplaces, outdoor fire pits, chimineas, outdoor wood boilers and more.
A heavy-duty steel frame with ShelterLock stabilizers provides a strong, stable building. The translucent polyethylene ripstop fabric cover allows light in and retains heat to dry wood faster. The floor vapor barrier keeps excess ground moisture out and cross ventilation aids the drying process. This shed is sized to hold up to 1/2 cord of wood.
- Shed features zippered front door panels for easy stacking and access to wood
- Screened vents allow for increased airflow
- Cross ventilation wicks away moisture to assist the drying process
- Easy Slide cross rail system and Ratchet Tite tensioning provide solid cover anchoring to the frame
- Drying times are dependent on geography and seasons
- Shed includes ratchet tie-downs, auger anchors, bungee cords and instructions
- Creates dry, seasoned firewood 2X faster than open air drying
- Heavy-duty 34mm steel frame has Dupont premium powder-coat finish that resists chipping, peeling, rust and corrosion
- ShelterLock stabilizers strengthen and stabilize frame
- Translucent triple-layer 5.5-oz. polyethylene ripstop fabric cover allows light in and retains heat to dry wood faster
- Cover has heat-bonded seams and is 100% waterproof
- Cover is UV treated with added fade blockers, anti-aging and anti-fungal agents for long life
- Floor vapor barrier keeps out excess ground moisture
Dee Zee NXc Running Board Steps (brackets) - Get a step up into your vehicle while adding styling and protection. Custom fit brackets work with any of the three styles of NXc Running Boards (sold separately). Heavy-duty steel braces are protected by our NRT powder coat application. NRT (No Rust Technology) is a specially developed coating that increases corrosion protection. Brackets and bolts for one complete installation come bundled together. No drilling is required on these vehicle specific mounts.
- NXc Mounting Brace
- Required To Mount NXc Running Boards
- NRT Powder Coat Is A Specially Designed To Increase Corrosion Protection
- No Drill Installation
- Custom Fit Application Ensures Quick And Easy Installation
- Running Boards Not Included
- Made In USA
- Limited-Lifetime Warranty
Dee Zee Tailgate Protector - Protects the top edge of your truck's tailgate. Made from heavy gauge Brite-Tread Aluminum. Full style protector covers top edge and full inside of tailgate.
- Brite-Tread Full Tailgate Protector
- Non-Rusting Diamond Plate Aluminum
- Protects The Entire Inside Of The Tailgate
- Also Protects The Top Edge Of The Tailgate
- Fits Over Factory Plastic
- Made In USA
- Limited-Lifetime Warranty
AirFoxx 1/2 HP 500 CFM All Purpose WorkShop Blower / Spot Cooler: DB0500A
- Weight: 16 lbs
- Width: 11
- Length: 15
- Height: 15
- Color: Yellow
- Construction: Polyethylene
- CFM: 500
- Horse Power: 1/2
- Power Cord Length: 10'
- Voltage: 110
- Amp: 4
- Impeller Diameter: 8.5"
- Static Pressure: 4"
- Sound Rating dB: 45