Double Barrel Adapter kit for use in conjunction with the Standard Barrel stove kit to allow for adding an additional barrel stacked on top. Adding this kit increases the amount of heat radiated off the barrel stove. The BKAD500 is perfect for a rustic cabin, pole barn or workshop. Simply put, this is the most basic stove you can buy.Learn More
The Dyna-Glo is a replacement wick for the Dyna-Glo RMC-95C6, RMC-95C6B and WK95C6C indoor wick kerosene heaters. Constructed from cotton and fiberglass, this replacement wick transports fuel up from the tank to the top of the wick, via capillary action, where the vapor is then ignited. The super absorbent cotton base for consistent fuel flow and the burn-free fiberglass top never needs trimming. The Dyna Glo also includes a replacement igniter and together with this incredibly efficient wick, they provide reliable match-free ignition for your Dyna-Glo heater.
- For RMC-95C6 and RMC-95C6B
- Material: Cotton and fiberglass
- Transports fuel up from the tank to the top of the wick via capillary action where the vapor is then ignited
- Super absorbent cotton base maintains consistent fuel flow
- Burn-free fiberglass top never needs trimming
- Manufacturer provides 1 year limited warranty
- Overall Height - Top to Bottom: 11"
- Overall Width - Side to Side: 7.5"
- Overall Depth - Front to Back: 0.5"
- Overall Product Weight: 0.31lbs
DH-20 is a battery powered siphon pump. It is easy to use, and provides fast, convenient transfer of liquids. It requires 2 D-cell batteries (not included).
- Battery powered siphon pump
- Constructed from durable non-corrosive plastic
- Easy to use
- Transfers fuel fast
Water pipe heating cable, fixed resistance, pre-terminated
Each cable is UL Listed to Canadian Safety Standards and CSA Certified when used in accordance with instructions on metal and water-filled plastic pipes. Each cable consists of tough PVC inner insulation, a continuous ground braid and weather resistant PVC outer jacket. AHB units are activated and de-activated by an integral energy saving thermostat.
- Length: 18'
- Amps: 1.1
The The Hi-Lift Bumper Lift is designed to fit most steel curved bumpers, for quick and easy lifting. The Bumper Lift has a 3,000lb (1361 kg) capacity. When used with the Hi-Lift Jack — which is not itself designed to be used on curved bumpers — the Bumper Lift makes raising one wheel of most average sized vehicles up to 2" (5 cm) above the ground an easy task.
- 3,000 lb capacity
- Never attempt to lift more than one wheel at a time
***JACK NOT INCLUDEDLearn More
Anchors must be permanently attached after assembly to keep you and your shed secure and safe. Choose the appropriate anchoring kit for your base as part of the preparation phase of shed construction. Arrow offers several permanent anchoring options, including concrete ones. (If you need to leave your building before it is completely assembled, you will need to temporarily anchor the corners of the shed to your base, and place weights, such as patio blocks or sandbags, on top of the floor frame.)
- Four steel corner gusset and perimeter clips
- Lag bolts building directly into concrete slabs
- 1/4" masonry drill bit
Dee Zee Tailgate Assist - Safely controls the drop of your truck's tailgate. Custom designed for each make and model. High quality and extensively tested to handle heave use for the life of the truck. Works in conjunction with factory cables. Easy, no drill installation that installs in minutes.
- Truck Tailgate Assist
- Safely Controls The Drop Rate Of A Tailgate
- Custom Designed For Each Make And Model
- Tested To Handle Heavy Use
- Works In Conjunction With Factory Cables
- Easy, No Drill Installation Takes Only Minutes
- All Hardware Included
- Only One Tailgate Assist Required Per Vehicle
- 3-Year Warranty