McAfee SECURE sites help keep you safe from identity theft, credit card fraud, spyware, spam, viruses and online scams

ORDER BY PHONE:

1-800-561-1752

7AM - 7PM CST 7 Days a Week

SPECIAL SALES & COUPONS!

Subscribe to receive members-only deals in your email

FREE SHIPPING*

ON ORDERS $99+

View Details

Hardware

Hardware

Shop for home improvement hardware, exterior house paint, air conditioning supplies, interior house paint, general plumbing supply and more.

Items 1-10 of 29

per page
Page:
  1. 1
  2. 2
  3. 3

Grid List

Set Ascending Direction
  1. US Stove 1802G Series Wood & Coal Furnace

    US Stove 1802G Series Wood & Coal Furnace

    4.9
    13
    $2,399.99

    The 1802 Series Wood/Coal Furnace comes equipped with a forced draft kit and a wall thermostat. This furnace can be used with existing HVAC ductwork, and includes twin blowers for great airflow. The heat capacity of the 1802 series wood/coal furnace is 2400-3600 square feet. The firebox is lined with firebrick, and the ash door is separate with a removeable ash pan for easy emptying. This unit holds up to 180 lbs. of pellets or coal. All of the doors, grates and liners are extra heavy duty cast iron, and has removeable shaker grates with handle. Installation materials such as floor protectors, connectors, and flues are not included with this unit. The 1802 series wood/coal furnace is easy to connect to 18" x 18" heat outlet, with an 8" flue collar. The manual damper system provides an opportunity for making adjustments to the system for efficient and even heating.

    • Forced Draft Kit with a wall thermostat is included.
    • Installation materials are NOT Included (i.e. floor protector, chimney connector, thimble, radiation shield, flue)
    • Twin 800 CFM blowers provide redundancy and large amounts of air flow
    • 8” Flue Collar
    • 18” x 18” Heat Outlet
    • Secondary Heat Exchanger with Firebrick Baffle for Extra Long Life
    • Manual Damper system allows Fine tuning for Maximum efficiency
    • Firebrick lined Firebox to boost efficiency and heating capacity
    • Separate Ash door with removable dump pan
    • Extra-Heavy Duty Cast Iron doors, grates and liners
    • Removable / Replaceable shaker grates (handle included)
    • Firebox Dimensions: Width:18 ½”, Depth: 36”, Height: 24 ½”
    • Not approved for use in Mobile or Modular homes
    • Not available for sale in WA and CA
    Heat Capacity (sq. ft.) 2,400 - 3,600
    BTU Range 81,993 - 218,648
    FUEL WOOD/COAL
    Coal/Pellets cap. 180 lbs
    Log Length 35"
    Weight 770 lbs.
    Width 26.5"
    Depth with blower 55"
    Depth without blower 44.5"
    Height 52.75"
    Learn More
  2. Fire Chief Outdoor Furnace  FCOS1800D

    Fire Chief Outdoor Furnace FCOS1800D

    $3,155.97

    Product Description

    A multi fuel Heating System - Outdoor Wood Burning Furnace is a quality, outdoor wood burning, forced air furnace engineered to meet and exceed the heating requirements of the average-sized home in even the coldest winter months. 
    The FCOS1800D Outdoor Wood Furnace keeps all of the mess outside - no ashes, wood, or dirt associated with indoor woodburning - with the all of the advantages - a reliable, convenient heat source - keeping you warm, all winter long. The OS1800D was designed to provide efficient, economical heat to your home or business. The FCOS1800D is completely assembled and pre-wired when shipped. Does not include chimney.

    This item is drop ship from the manufacture. It will be Free Shipping directly to your home or business.

    Specs/Features

    • 9 Cubic Ft. Firebox
    •  Takes 28” Log
    •  125,000 BTU
    •  6” Chimney Required
    •  10” Hot Air Plenum Outlet
    •  12” Cold Air Return
    •  25’ 10” Insulated Flex Duct Included
    •  Cast Iron Grate System
    •  13” x 14” Fuel Door
    •  Weight 675 lbs.
    •  Heats up to 2500 Sq. Ft.
    •  Dimensions
    •  Height 59”
    •  Width 30“
    •  Depth with blower housing 59”
    •  Patented Heat Dump Feature
    •  Thermostatically Controlled Draft System
    •  1800 CFM 1/3 HP Blower Motor
    •  Pre-Wired Electrical System
    •  Chimney Anchor Plate Included
    Learn More
  3. US Stove Corn Pellet Stove on Legs 6041

    US Stove Corn Pellet Stove on Legs 6041

    $2,759.97

    The 6041 multi-fuel stove has evolved into one of the most reliable heating appliances on the market. Not only is it capable of burning compressed wood pellets, it can also burn corn, soy beans, cherry pits, olive pits, biomass fuel grains, and processed silage with just a few simple adjustments.This stove is mobile home approved (with the use of a fresh air kit) and is easy to install.

    Product Features:

    • Up to 52,000 BTU's
    • Heating: Up to 2,400 sq. ft.
    • 60 Pound Capacity
    • 120 CFM Blower Included
    • LED Digital Control Board
    • EPA Certified

    Dimensions:

    • Depth: 28 Inches
    • Width: 29 Inches
    • Height: 31 Inches

     

    Learn More
  4. WoodMaster 30KW Mini Boiler 799-0030

    WoodMaster 30KW Mini Boiler 799-0030

    $6,995.97

    The mini boiler is an indorr ASME-certified wood pellet boiler. The compact design utilixes thermal storage to maximize efficiency.

    Product Features:

    • Built in USA!!
    • EPA qualified phase 2
    • Flue Pipe - 6 inch diameter
    • Connection Hole (burner) 6 inch diameter
    • Power Connection: 120v
    • Maximum Output: 102,000 BTU
    • Ash Box Volume: 1.74 Cubic Foot 
    • Boiler Water Capacity: 9.5 Gallons
    • Measurement: 26.5" w x 38"-40h x 33.5"d + burner and fan d = 49.75"

    Installation:

    • The mini boiler must be installed in a location that has enough space for easy cleaning and maintenanceof the furnace.
    • There must be ample room for the storage hopper and auger assembly.
    • The furnace must be on a level surface that can support the weight of the unit, as well as the weight of a pellet hopper.
    • The furnace room must have a vent to allow ample fresh air for the combustion process.
    • A room vent size of at least 31 square inch is recommended.

    Maintenance:

    • Regular cleaning of the heat exchanger tubes is made from the top by taking the top door and cover off the furnace. Ensure the furnace has had ample time to cool before cleaning the heat exchanger tubes and empyting the ash box. Dispose of ash in a metal container away from combustible materials. When cleaning the heat exchanger tubes ensure that you do not damage the ceramic insulation in the process. The mini boiler has an extra-large ash box in the bottom to help with cleaning and maintenance. The ash box should be checked and emptied regularly. The ash box can hold approximately 1.74 cubic feet of ash or 1 to 2 weeks worth on average heat loads.
    • Automatic air cleaning handles the daily process.
    • Removal of the firepot takes only a few minutes. 
    • Always disconnect the power source first!
    Learn More
  5. Fire Chief Wood Burning Furnace  FC700E

    Fire Chief Wood Burning Furnace FC700E

    2.4
    4
    $2,700.97

    Product Description

    The Fire Chief FC700 is our most popular indoor wood and coal burning furnace and will keep you warm for many winters to come. Fire Chief Wood and Coal Burning Furnaces are designed for maximum efficiency with our unique 360 degree Cast iron Roller Grates (with a lifetime warranty) and a Secondary Combustion Chamber - each Fire Chief furnace Heating System is pre-wired for ease of installation, constructed of heavy gauge steel (7 ga & 10 ga) plus cast iron front and rear baffles for strength and Quality Heating System durability. 
    Comfortably heats approximately 2500 - 3500 square feet*

    Product Features

    • Heating System Construction - High Grade, heavy (7 & 10) gauge steel is continuously welded for maximum structural strength. 
    •  Secondary Combustion Chamber - Increases fuel efficiency for this heating system while re-burning smoke and wood gases before they are vented up the chimney. 
    • Cold Air Return/Filter Box - Standard equipment on the FC700 Fire Chief Furnace. The box filters the return air as well as allowing a connection for a cold air return duct if necessary. 
    •  Cast Iron Baffle - Directs the combustion air flow below and above the cast iron grates creating the maximum fire temperature for every pound of fuel. This heating systems cast iron baffle comes with a lifetime warranty. 
    •  Cast Iron Roller Grates - Designed to roll 360 degrees from either direction, allowing fine ash to drop into ash pit and leaving hot coals in fire box. This heating systems cast iron roller grates comes with a lifetime warranty. 
    •  Thermostatically Controlled Draft - Adds convenience with a full range of comfort determined by the temperature setting of your Fire Chief wall thermostat. 
    •  3-Speed Blower - This heating system motor allows for gentle circulation of air when heating requirements are low and high output when heating requirements are high. 
    • Pre-Wired Electrical System - Fully automatic heating system components are pre-wired for your convenience and to reduce electrical installation time and expense.

    Specs:

    • Weight: 580 lb approx 
    • Height: 50.5'' 
    • Width: 26'' 
    • Depth: 31'' 
    • Maximum Heating Capacity: 2500 - 3500 sq ft 
    • Maximum Btu Output: 150,000 approx 
    • Maximum Log Size: 28'' 
    • Flue Size: 6'' 
    • Fire Chamber Volume: 7.00 cu ft 
    • Plenum Size: 12'' Round 
    • Door Size: 13'' X 14'' 
    • 3-Speed Blower Capacity: 1150,1500, 1800 cfm 
    • Warranty - Firebox: 5 Year 
    • Warranty – Grates, Castings: Lifetime
    Learn More
  6. WoodMaster Force 20 Pellet Furnace 799-0002

    WoodMaster Force 20 Pellet Furnace 799-0002

    $4,995.97

    The Force 20 Wood Pellet Furnace is a hot air heat exchanger that is powered by pellets with the Renovator. It conveniently sets up next to your existing forced air system for a simple adaption to your ducting.

    Product Features:

    • Heat output 68,242 BTU/hr
    • Measures 13.39 inches wide X 55 inches high X 22 inches deep (with burner and fan: 53 inches deep)
    • CC smoke pipe from floor: 52 inches
    • Outside diameter flue pipe: 5 inches
    • Ventilation connection: 12 inches
    • Air flow 0-3400 m3/h
    • Ash box volume: 1 cubic foot
    • Power: 120 Vac
    • Fire year limited manufacturer warranty

    Installation:

    • The Force furnace must be installed in a location that has enough space for easy cleaning and maintenance of the furnace
    • There  must be ample room for the storage hopper and auger assembly
    • The furnace must be on a level surface that can support the weight of the unit, as well as the weight of a fully pellet hopper
    • The furnace room must have a vent to allow ample fresh air for the combustion process
    • A vent size of at least 20 square inches is recommended

    Maintenance:

    Sweeping the heat exchange tubes:

    • Regular cleaning of the heat exchanger tubes is made from the top by taking the top door and cover off the furnace. Ensure the furnace had had ample time to cool before cleaning the heat exchanger tubes and emptying the ash box. Dispose of ash in a metal contained away from combustible materials. When cleaning the heat  exchanger tubes ensure that you do not damage the ceramic insulation in the process. The Force has an extra large ash box in the bottom to help with cleaning and maintenance. The ash box should be checked and emptied regularly, and can hold approximately 1 cubic feet or ash or 1 to 2 weeks worth of ash.

    Cleaning the burner:

    • Air cleaning is a simple process. Removal of the firepot takes only a few minutes. Always disconnect the power source first.
    Learn More
  7. WoodMaster 20KW Renovator Boiler 720-0004

    WoodMaster 20KW Renovator Boiler 720-0004

    $2,550.97

    The WoodMaster Renovator Natural Energy heating system is and economical solution that burns abundant, renewable and affordable wood pallets. The renovator is designed to convert your existing fossil fuel boiler/ furnace system into a Natural Energy heating system. No need to replace that old outdated system when you can just Renovate it! 

    Product Features:

    • Efficient heat from wood pellets that supports local economy.
    • Approximately 68,000 BTU for larger applications.
    • Automatic Ignition for heat demand
    • Air cleaned firepot to help keep maintenance to a minimum and retain high efficiency.
    • Easily connects to existing systems, convert your fossil fuel heat to pellets for independence from foreign oil.
    • Fully automatic PLC for user friendly operation.
    • Low maintenance, just makes life easier.
    • Compact design that easily fits into tight areas. 
    • Burn back protection to keep everyone safe.
    • 5 Year limited manufacturer warranty

    Cleaning:

    • Manual cleaning is a simple process. Removal of the firepot takes only a few minutes. Below is a step by step process for burner removal. Always disconnect the power source first!
    Learn More
  8. HomComfort Safe Room Storm Protection Shelter HSR

    HomComfort Safe Room Storm Protection Shelter HSR

    From: $3,999.97

    Are you wondering where the best place is to put your family safe during a storm? You no longer have to worry with the Safe Room Storm Protection Shelter. When you place this shelter inside your home, shed or business, you will ensure maximum safety to all of the occupants.

    • Reinforced Welded Panels
    • Anchoring System Included
    • 10 Gauge Steel Bolt Together, Panelized Construction for Use in Existing Structures
    • Heavy Duty Galvanized Hardware for Long Life
    • Out-swing Door for Maximum Interior Space
    • Carpet Included
    • Vented Door Provides Ample Air Exchange
    • Triple-Locking, Single Lever Latching Mechanism with Keyed Door Handle for Extra Safety & Security
    • Precision Farbricated Using High-Tech CNC Equipment to Ensure a Perfect Fit
    • Battery Operated LED Light Included for your Comfort and Safety
    • 7 Foot Ceiling Height Ensures Comfort for Even the Tallest Occupants
    • FEMA Compliant Shelter Sealed by Licensed Professional Engineer by Producer Member of the National Storm Shelter Association (NSSA) Texas Tech Tested and Approved
    • Heavy Duty Hardware
    • Ships Direct to Location

    Available in 3 Sizes:

    • 4 Foot by 4 Foot
    • 6 Foot by 6 Foot
    • 8 Foot by 8 Foot
    Learn More
  9. American Energy Systems Magnum Baby Auto Ignition Multifuel Stove BC-AC-E

    American Energy Systems Magnum Baby Auto Ignition Multifuel Stove BC-AC-E

    $2,542.97

    Product Features:

    • Black Door
    • 32,000 BTU Capacity
    • Auto Ignition 
    • Multifuel Firepot 
    • Thermostatic Operation
    • Multi-Programs
    • 50 Pound Capacity Hopper
    • Large Ash Pan
    Learn More
  10. WoodMaster 30KW Renovator Boiler 720-0015

    WoodMaster 30KW Renovator Boiler 720-0015

    $3,435.97

    The WoodMaster Renovator Natural Energy heating system is and economical solution that burns abundant, renewable and affordable wood pallets. The renovator is designed to convert your existing fossil fuel boiler/ furnace system into a Natural Energy heating system. No need to replace that old outdated system when you can just Renovate it! 

    Product Features:

    • Efficient heat from wood pellets that supports local economy.
    • Approximately 102,000 BTU for larger applications.
    • Automatic Ignition for heat demand
    • Air cleaned firepot to help keep maintenance to a minimum and retain high efficiency.
    • Easily connects to existing systems, convert your fossil fuel heat to pellets for independence from foreign oil.
    • Fully automatic PLC for user friendly operation.
    • Low maintenance, just makes life easier.
    • Compact design that easily fits into tight areas. 
    • Burn back protection to keep everyone safe.
    • 5 Year limited manufacturer warranty

    Cleaning:

    • Manual cleaning is a simple process. Removal of the firepot takes only a few minutes. Below is a step by step process for burner removal. Always disconnect the power source first!
    Learn More

Items 1-10 of 29

per page
Page:
  1. 1
  2. 2
  3. 3

Grid List

Set Ascending Direction